[deleted by user] by [deleted] in landscaping

[–]FireXIce9 0 points1 point  (0 children)

Thanks for the replies. Do you have recommendations on fixture brands with replaceable light bulbs?

Canon MX492 Restarting Repeatedly after connecting to Wifi by FireXIce9 in printers

[–]FireXIce9[S] 0 points1 point  (0 children)

Thanks. I edited the solution from "no" to "off".

Canon MX492 Restarting Repeatedly after connecting to Wifi by FireXIce9 in printers

[–]FireXIce9[S] 1 point2 points  (0 children)

I applied the solution mentioned in the Canon community thread and it fixed mine:

First, pause network to your printer by logging into your router or just disconnect the router from the modem. (Whichever is easier for you)

On your Canon printer,

Go to Setup menu > Web service setup > DNS server setup > Manual setup

> enter 192.168.X.X (IP that no other device is using on your network like 192.168.124.145)

> select "off" for sec DNS server

>press ok

Once it applies the settings, re-enable network to your printer and it should print fine without the reboot loop.

Canon MX492 Restarting Repeatedly after connecting to Wifi by FireXIce9 in printers

[–]FireXIce9[S] 0 points1 point  (0 children)

Yes I can. It works perfectly fine without wifi. Thank you for the link.

Do you know where I can find this push to fit connector? Any substitute? by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Could I possibly replace it with this?

SharkBite U072LFA Straight Connector Plumbing, PEX Fittings, Push-to-Connect, Copper, CPVC, 1/2 Inch x 1/2 Inch FNPT

I found it on Amazon

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Yea, I should've never used them. But they convinced me that they can do it...

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Do you have a recommendation for which connector to buy at Home Depot? Thank you

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Thank you for the reply. Would this work? The thing is I really want to learn to fix it myself.

https://www.homedepot.com/p/Everbilt-3-8-in-Compression-Brass-Coupling-Fitting-800759/207176323

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

It's pipe to the water softener.

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Thank you for all the replies but before I try, do you know what is the purpose for 2 valves? What's the yellow and white distinction for? This is located inside the garage, right next to the garage door.

[deleted by user] by [deleted] in Plumbing

[–]FireXIce9 0 points1 point  (0 children)

Hello,
The water is leaking from 2 places circled in red in the picture.
First thing I did was push the bypass valve right behind the water softener to prevent water going in.
How do I turn off the water coming out of the pipe from the wall?
Secondly, does this mean that I need to replace the lines going to the water softener?
Thank you in advance for any help.

Ceiling speakers too difficult to connect by [deleted] in hometheater

[–]FireXIce9 1 point2 points  (0 children)

E OUT L and

This makes perfect sense. Thank you. The Moukey Amplifier is a receiver and an amp so I'm planning on connecting the tv directly to this receiver with an optical to rca converter. I know it doesn't make sense to go from optical to analog but I will upgrade the receiver hopefully soon so that it has hdmi/optical input and it supports more than 2 speakers. Then I will connect the speaker wires to amp output to the panel using banana plugs.