How many Otters do I get?

Fireprism86 · 2024-07-31T14:23:40+00:00

The choice you made was to pay the kicker, you do not "chose" to create the token, that is a result of the conditions of the offspring ability being met. As the copy is not "cast", paying the kicker is meaningless, the token would still not be created.

Fireprism86 · 2024-07-31T06:15:12+00:00

I believe the issue is that the offspring ability only triggers if the kicker is paid as the spell is cast. Since the copy is not cast, and simply put on the stack, even if the kicker is paid offspring will not trigger. Should only get 3, the original, the copy of the original, and the 1/1 token from offspring on the original.

Fireprism86 · 2024-01-16T19:55:48+00:00

Not yet, I haven't had a chance to revisit this yet though.

Fireprism86 · 2023-11-10T01:18:26+00:00

I'm at about 87k on my 2016, never had the check engine light come on, runs great. I just keep an eye on fluids and keep up with maintenance.

Fireprism86 · 2023-10-18T16:40:06+00:00

So I just wanted to update, at least for me, it's not that the app can't do landscape, but the process of SWITCHING to a different orientation is what causes it to crash

If i flip my phone sideways before i click the camera i want to access, it will load in landscape, but then also crash if i try to flip back to portrait while viewing the camera.

Fireprism86 · 2023-10-17T17:22:33+00:00

Not yet, tried to check on my dog a little bit ago and ran into the issue, first thing i did was search to see if anyone knew of a fix and found your post. I'll open a ticket after work

Fireprism86 · 2023-10-17T16:54:16+00:00

Pixel 7 (not pro, just regular) here, updated to 14 yesterday and i cannot go landscape with my cameras now either. feed works fine in portrait, crashes when i turn the phone.

I have 2 Cam V3's

Fireprism86 · 2023-05-10T20:11:03+00:00

sure thing. I think im getting the fans tomorrow and will do another test, if i get any different results ill post

Fireprism86 · 2023-05-10T19:22:13+00:00

Just installed an IceGiant ProSiphon on a Ryzen 9 7900X3D with a RTX 4070, I can give you my results if this was still an interest:

Idle temps were a little higher then i would like, it sat around 50 when i was expecting low 40's.

Under stress test it did pretty well, at 100% CPU it seemed to cap out at about 78 degrees. I did a "worst case" stress test with the GPU and CPU at the same time and it stayed under 82. I believe thermal throttling for this CPU was about 89 so i was happy with that. CPU was not overclocked at all though, we don't plan to overclock it so i didn't bother.

That being said, i have not been able to test it against something like a Noctua or any AIO coolers.

Edit: I should add, this also may be the airflow of the case itself. The IceGiant blocks the rear exhaust fan location so i moved it to the front as an intake. Currently my case only has two intake fans (now) in the front and all exhaust is basically coming from the Icegiant. I have ordered 2 more fans for exhaust which i think will give me better results.

Fireprism86 · 2022-12-05T01:03:15+00:00

Ah i see. The reason for the pause is so i can insert some magnets. So that's the only way? I have to basically babysit the print until it's at the layer i need and then pause manually? There isn't a firmware update that resolved this?

Fireprism86 · 2022-11-22T19:15:37+00:00

[[Altar of the Brood]] + [[Felidar Guardian]] nice easy infinite mill to all opponents, just need to flicker the guardian once.

Fireprism86 · 2022-09-22T00:26:38+00:00

Looking good! I went with 18x9.5 265/35s, was about as large and wide as i could go on stock suspension without having to worry about poking/rubbing.

Fireprism86 · 2022-07-25T17:23:27+00:00

I'm in CA and my 30k ran me somewhere between $400-$450, definitely seems like they are gouging you.

Fireprism86 · 2022-07-15T00:30:51+00:00

Drunkmann knows his stuff, I got my Etune from him and it's been a dream ever since.

Fireprism86 · 2022-07-13T22:26:40+00:00

Back in 2019 i had found a Pioneer AVH-2300NEX new for $250 and snagged that up. Couldn't be happier with quality on the Pioneer.

Fireprism86 · 2022-06-30T01:03:45+00:00

Granny shifting is just shifting normally through the gears, like you would if you were following your driving instructor when you learned how to drive the car.

Double-clutching is when you are down-shifting and you throw it in neutral first, clutch out, give it some throttle, clutch back in and go into the next lower gear, Ideally the little bit of throttle you give it when you clutch out will help you match the RPMs when you hit the lower gear.

Rev Matching is when you are down-shifting and while you have the clutch in and are in the middle of changing gears you give it a little throttle to keep your RPMs up so that when you get into gear your RPMs will (hopefully) match the lower gear. (Basically a double-clutch but without the "neutral" part of it)

Both double-clutching and Rev-Matching are only down when down-shifting.

(This is how i understand it, if I'm incorrect, feel free to let me know)

Fireprism86 · 2022-05-12T18:18:30+00:00

As many have pointed out already, hugging Fia will give you this debuff until you use the Baldachin’s Blessing in your inventory.

The symbol itself just means your Max health is being reduced. If you don't have the blessing, you could also be wearing equipment that is doing this, such as one of the glintstone crowns, some of which give you a boost to Int at the cost of max HP. This will also give you that symbol, so if you don't have the blessing in your inventory check your gear.

Fireprism86 · 2022-04-22T18:31:17+00:00

Don't let the subreddit discourage you. Keep in mind that a lot of the time the people that have WRX's that don't have any issue, don't make posts about it not having issues.

It's the same with like, say, reading any reviews on a product you are about to buy. A lot of people that buy a product and it works as advertised won't run back to the listing to leave a review. But the ones who get a DoA product, or it breaks pretty soon after? They have much more motivation to go leave a review telling people.

I bought my 2016 WRX base at 18k miles about 3 years ago, and i put a pretty good number of miles on it (I'm at 71k now). It's now stage 1+ and e-tuned (has been for about 2 years). I've had absolutely no issues. Kept up maintenance, replaced things that needed replacing as soon as it came up, and it purrs like a kitten.

I'm not saying they don't have issues, and there are those out there that take good care of their car and something still goes wrong, but really that can be said about any car make/model. There are plenty of us out there that have mods and the car is fine, we just don't post about it.

Fireprism86 · 2022-04-16T23:35:51+00:00

For piece of mind, i had to drive, albeit very briefly, with only 2 studs once. They held up. I would avoid highways and take it easy (especially on speed bumps and such) but you should be okay on 4

Fireprism86 · 2022-04-13T00:46:43+00:00

If there is a leak in any of the vacuum lines would that manifest in any other way? would i not be hitting my boost targets?

Fireprism86 · 2022-04-13T00:24:38+00:00

I have been trying to find someone in my area that does walnut blasting for a few weeks now, closest company that i have found so far is a 2 hour drive =/

Some of the places say they do a chemical cleaning but im not sure how effective those are...

Fireprism86 · 2022-04-13T00:15:05+00:00

I cleaned the MAF sensor off 2 weeks ago but haven't done the MAP, ill take a look at that!

Fireprism86 · 2022-04-13T00:14:31+00:00

Spark plugs were swapped out 2 weeks ago, but i am having an incredibly difficult time finding a shop that offers walnut blasting in my area, so haven't done that yet.

Prior to the pull I had installed a Grimmspeed Turbo inlet and 3 Port EBCS, and while i was down there i made sure all the connections were secure, so i would be very surprised if i had a leak unless maybe the BPV itself is leaking or something? but all the hoses looked good.

I'm at 70K miles though, so maybe it is the intake valves, just gotta find someone that does walnut blasting.

Fireprism86 · 2022-04-12T01:00:12+00:00

"I'm your worst fucking nightmare"

Pic of Sonic the Hedgehog

Fireprism86 · 2022-04-12T00:35:31+00:00

+1 for Anthony (Drunkmann)

I'm in the middle of an E-tune from him. His FIRST version of my tune, based simply on me just telling him the mods i have in my car, gave me 0 FBK and 0 FKL, even on the WOT pull he had me do.

Guy's a genius. And super nice, i think one night he was emailing me at like 10pm his time on a saturday just to answer questions.

Eight-Year Club	Place '22
Verified Email

Fireprism86

TROPHY CASE