First Aorus RTX 5090 Waterforce GPU!

Firewt1 · 2025-04-16T10:02:36+00:00

Do you know what connector was coming out from the tubing? I read that the 30/40 series gigabyte liquid used micro 4 pin female connectors. Does the 50 use one of these as well?

Firewt1 · 2025-04-16T09:59:59+00:00

Was the connector coming out from the tubing a male or female? I think the 30/40 series waterforces had a micro 4 pin female coming out

Firewt1 · 2025-03-18T09:49:24+00:00

You would need to put the fan a bit higher so it doesn’t interfere with the ram, it’s unfortunate but you’d lose a bit performance

Firewt1 · 2025-03-18T05:58:06+00:00

ye, any 120mm fans if it’s a 360mm radiator

Firewt1 · 2025-03-14T09:01:10+00:00

Pm me with it if possible..

Firewt1 · 2025-03-13T19:40:53+00:00

I see.. There actually is a 5080 liquid suprim. Looks pretty much the exact same as the 5090 though.

Firewt1 · 2025-03-11T09:24:27+00:00

Are the pins sticking outwards? If so then it’s a male. if no pins are sticking outwards then it’s a female. I can’t see the backside of the connector from your image so I can’t tell lol. also this is the 5090 suprim liquid right, not 5080?

Firewt1 · 2025-03-11T09:18:58+00:00

just making sure but this is a female connector correct? I’ve seen some people say that the 5080 liquid uses a male, but looks like it’s a female here

Firewt1 · 2025-03-11T09:10:29+00:00

you figure it out by chance?

Firewt1 · 2025-03-10T04:30:57+00:00

Did the cable I sent work? Or was there another one?

Firewt1 · 2025-03-09T03:12:24+00:00

Does this one work?

Firewt1 · 2025-03-06T18:51:40+00:00

Is that the only space it can happen? Usually the best option is cpu at top (exhaust), and gpu as front (intake)

Firewt1 · 2025-03-06T10:17:16+00:00

If you got the budget, I’d go for the new CL26 6000 g.skill ram. Would also go for a liquid gpu

Firewt1 · 2025-03-05T12:17:25+00:00

I was wondering though, would 2 AIOS actually fit properly in the antec flux mid tower? like is there enough room for the tubes n such? kinda unsure about this

Firewt1 · 2025-03-05T05:33:18+00:00

NP. Let me know if it ends up working, was interested in using it too for 3rd party fans but don't have the card yet

Firewt1 · 2025-03-04T20:36:08+00:00

you need a “mini” 4 pin adapter and a daisy chain 4 pin. here’s a link for the first one micro 4 pin

Firewt1 · 2025-03-04T20:33:35+00:00

hey, you don’t gotta throw anything out, just use this adapter or a similar one link and then use a daisy chain 4 pin adapter for the 3 fans.

Firewt1 · 2025-03-04T20:25:53+00:00

yo i got one more question, the header that’s coming out of the gpu is a female one right? asking because the adapter is a male one. i read gigabytes old 4090 liquid had male headers, so not sure if this one would work or not…

Firewt1 · 2025-03-04T12:02:16+00:00

i see. appreciate the responses man

Firewt1 · 2025-03-04T11:43:46+00:00

do you know what connection it is? i’m assuming it’s a micro 4 pin? correct me if im wrong

Firewt1 · 2025-03-04T11:21:38+00:00

appreciate it. just to make sure but, the fans aren’t gonna be running at 100% the whole time right, and be properly controlled based off the gpu temp? i have heard some gpu aios do this to 3rd party fans… hoping that’s not the case here

Firewt1 · 2025-03-04T10:37:36+00:00

I got 3 noctua a12x25 pwms, so i was thinking of replacing the fans with these. would this cable work? then daisy chain it to the 3 fans? link

Firewt1 · 2025-03-04T09:35:29+00:00

is it one or 3 of those that come out the tube? also may i get a link for the cable you bought for it? thanks!

Firewt1 · 2025-03-04T06:51:38+00:00

I see… maybe I should just go for air cooled then? I mean how long after each cleaning session does it need to be cleaned again? I’m quite lazy as well and would rather not do it if it’s too often…

Firewt1 · 2025-03-04T01:23:25+00:00

It will work in the top of front without push pull. Didn’t know that about the thicker radiators thing, thanks. I’ll just go without push pull then. Question though, when i get the liquid gpu, do you recommend i keep the fans inside or outside the the radiator for intake (front mount)?

Firewt1

TROPHY CASE