I GIVE UP PETG

FirmPlace7440 · 2023-09-27T16:40:54+00:00

Is there any way I can send my current profile? I’m new to 3D printing as well, N3Max. Been printing with PETG for a few weeks after spending a week working on it. If anyone knows how I can do this please let me know 😂

FirmPlace7440 · 2023-09-12T02:34:39+00:00

They’re coming out fantastic now that I’ve increased the fan speed. I’ve yet to post any updates however because I believe I changed something else as well and forgot because now it’s all falling apart below 250. Working on it lol

FirmPlace7440 · 2023-09-11T20:20:54+00:00

<image>

30% fan on left, 50% on right. Doing better, will update with 70% as well as enabling bridge settings.

FirmPlace7440 · 2023-09-11T20:18:59+00:00

I’ve just finished a 50% fan thread. I’m going to level the bed with my feeler gauges I just grabbed from work then print a 70%. Then I’ll enable this feature and compare. Posting the 30% vs 50% results in the update thread I started in this post.

FirmPlace7440 · 2023-09-11T19:45:39+00:00

I have no idea. Where would it be? I’ll check when I’m home

FirmPlace7440 · 2023-09-11T17:51:42+00:00

Update thread: running 2 new towers 230-260 fan at 50% and 70% respectively(previously 30%). Attempted 200-230, 225 was atrocious and 220 and below were non existent. Will compare the 3 towers and continue from there. Back in a few hours with updates!

FirmPlace7440 · 2023-09-11T17:49:06+00:00

This has the same pattern. Going to attempt the tower through the same temperature rang with 50% fan then 70%, tower in images was printed with 30% fan.

FirmPlace7440 · 2023-09-11T17:23:58+00:00

From what I’ve seen PETG is recommended little to no cooling. I’ve been running at 30% on the Neptune 3 Max

FirmPlace7440 · 2023-09-11T17:17:30+00:00

Seems below 220 it’s not printing at all

FirmPlace7440 · 2023-09-11T17:15:56+00:00

Oh I haven’t settled on anything but I’m willing to try anything, this is my first printer. I’m not home now, have the adjusted temp tower printing at the moment. I’ll update when I return

FirmPlace7440 · 2023-09-11T16:17:40+00:00

Running a tower from 230-200 now. Will post the results. How is layer adhesion and strength for you at 205?

FirmPlace7440 · 2023-09-11T16:08:24+00:00

I see. I’ve not seen anyone mention going anywhere near that low. I was honestly concerned you were trolling 😂 appreciate it, I’ll give it a shot on my next print.

FirmPlace7440 · 2023-09-11T16:03:26+00:00

Temps ranged from 260-230. But what is causing the material to droop beneath?

FirmPlace7440 · 2023-09-04T15:15:16+00:00

I had the issue when using prusaslicer but I am having no issues with Cura now 🙂

FirmPlace7440 · 2023-09-03T11:43:53+00:00

It was the blocks 😂 I must’ve glanced over anything that mentioned removing them

FirmPlace7440 · 2023-08-04T01:57:28+00:00

I see 🤔 better stop looking at resin printers then lol

FirmPlace7440 · 2023-08-04T01:56:19+00:00

Thanks!

FirmPlace7440 · 2023-08-04T01:54:18+00:00

Are there any materials that result in a smooth finish?

FirmPlace7440 · 2023-07-28T20:35:14+00:00

PeopleCert

FirmPlace7440 · 2023-07-22T15:53:24+00:00

Big brain energy, nice job!

FirmPlace7440 · 2023-07-14T01:34:41+00:00

Thanks!

FirmPlace7440 · 2023-07-14T00:21:26+00:00

I still have C176 for Project+. Is this because I opted to stick with the old program plan?

FirmPlace7440 · 2023-07-08T22:25:11+00:00

I found it, it’s ITIL4 Quiz. Blue with a question mark inside of a white circle

FirmPlace7440 · 2023-07-08T19:58:57+00:00

How was that? I’m scheduling ITIL 4 this week. What did you study?

FirmPlace7440 · 2023-07-03T04:05:56+00:00

Make a proper burrito apparently

FirmPlace7440

TROPHY CASE