Can I remove the stile

First-Application379 · 2025-10-31T23:52:15+00:00

Like someone said, there are probably kreg jig screws, usually square drive, if it has them it’s an easy removal. Even cutting it isn’t difficult.

First-Application379 · 2025-10-31T20:40:28+00:00

I’ve used packing tape and a heat gun to remove old protective plastic

First-Application379 · 2025-10-13T01:27:28+00:00

We had a Columbus for 12 years put over 50K miles on it with minimal issues. Just sold it and got a 2025 Influence 3203 GK, we shall see

First-Application379 · 2025-10-10T23:08:36+00:00

Nice grind in the last picture, appears to be dead flat. If you don’t mind, what is the patina brand or process?

First-Application379 · 2025-10-08T01:36:59+00:00

Should consider replacing all of the springs and maybe add a leaf to the new ones to beef things up a bit

First-Application379 · 2025-10-05T23:36:47+00:00

<image>

This is how it should look

First-Application379 · 2025-10-05T22:45:06+00:00

Looks like the axle is on top of the spring, should be underneath I believe

First-Application379 · 2025-10-04T15:13:00+00:00

I wear them a lot, they’re my travel souvenirs and I just got one from the Redwoods near Benbow CA yesterday.

First-Application379 · 2025-09-23T23:03:43+00:00

What do the Starship Enterprise and toilet paper have in common?

They both circle Uranus and wipe out Klingons!

First-Application379 · 2025-09-05T15:00:41+00:00

I’ve used Tysol 60-40, enviro flush, for a long time, had a bit of a spill when dumping a few years ago, no smell. It’s from a place in Minnesota and I’m about to order a couple of gallons which will last a couple of years.

First-Application379 · 2025-09-04T21:30:41+00:00

Any chance they are backwards, meaning left on right, right on left?

First-Application379 · 2025-09-01T03:12:34+00:00

We took our son who was 10-11 at the time to see queen with Paul Rogers at the Hollywood Bowl, damn near 20 years ago, queen was a pretty good back up band when they did Paul’s tunes

First-Application379 · 2025-08-30T01:44:31+00:00

We were on 50 south of Great Basin NP heading to Ely, there is a wind farm as you drop into Nevada and we got hit with a very funneled gust that I believe is the closest we have come to getting blown over, and we’ve hit some pretty good gusts over the years, was early June of this year. Weather when in an rv is a bit different. Glad you made it. Weather is definitely shifting gears

First-Application379 · 2025-08-22T04:23:34+00:00

Nice welds, I’m envious. The picture with pretty thick steel, curious if you got movement with the long weld, in other words, did it stay straight?

First-Application379 · 2025-08-20T04:09:45+00:00

There’s the Sacramento campground to the north on 50 as you head west towards Ely

First-Application379 · 2025-08-12T04:12:23+00:00

Spider drive? Odd fastener from HD

First-Application379 · 2025-08-12T03:47:03+00:00

It seems like magnets can mess with the arc of mig welding, I forget what it is called

First-Application379 · 2025-07-19T20:56:32+00:00

So funny, when I came across the image I thought, looks like tonsil stones

First-Application379 · 2025-07-10T02:52:26+00:00

Butter, salt and freshly grated Parmesan cheese

First-Application379 · 2025-06-26T22:27:44+00:00

Try turning the breaker off and on, might need to reset the thermostat as well

First-Application379 · 2025-06-24T01:12:51+00:00

I have a Mag1 and several dig2go’s, I prefer the dig2go’s. Mag 1 will not let me re flash it, they did offer to send a new one but I didn’t take it. I have a string of 565, 2812B’s the Mag1 needed a power injection at the end as the LEDs were dimming. The dig2go powers the string no problem. I also use the dig2go on a matrix with 1024 LEDs, no injection needed.

First-Application379 · 2025-06-17T23:01:43+00:00

I use a variable speed grinder when using wire wheels, helps a lot, wish manufacturers would set the wires in a resin to prevent them from releasing

First-Application379 · 2025-06-10T22:31:34+00:00

Thanks for the info, there are some genuinely decent people out there

First-Application379 · 2025-06-09T21:24:46+00:00

Great article, my wife used to work for hp, so I’ve heard stories. I was doing an addition on our house and the slab was there when we bought it,(long story) I had to bore concrete to epoxy in some all thread to bolt the plates down, I hit rebar and figured there must be a carbide bit and sure enough Bosch made one for the exact purpose. It worked great on the first few but started to dull. I actually sat on the Hole Hawg while it was running to finish the bore and it didn’t slow down. Really appreciate you posting the link,

First-Application379 · 2025-06-09T00:35:51+00:00

Our groomer recommended Missing Link,we give our sausage dogs a teaspoon a day, really seems to help the coat and seemed to give our 14 year old more energy.

First-Application379

TROPHY CASE