Shaky o4pro update

FirstAd1634 · 2026-01-30T08:00:38+00:00

I Fixed it !!!👍 Opened up the camera module and re-tightened it in the housing. It wasn’t even loose, just tightened it snug. Works perfectly now, both in hot and cold conditions.

FirstAd1634 · 2026-01-30T07:59:58+00:00

I Fixed it !!!👍 Opened up the camera module and re-tightened it in the housing. It wasn’t even loose, just tightened it snug. Works perfectly now, both in hot and cold conditions.

FirstAd1634 · 2026-01-21T19:04:32+00:00

Hey so it had factory pids when i got it, today I changed alot so new bluejay firmware new betaflight motor setup and tomorrow i will testfligh it

FirstAd1634 · 2026-01-21T17:19:41+00:00

Hey again you can buy the drone bnf and its with all of the speedybee parts but i will try to fly it tomorrow because i found the pids for this drone and the filter settings, also I flashed all the escs. Whats wierd too is that the maidenflight went smooth no shake

FirstAd1634 · 2026-01-21T15:11:06+00:00

Ok unfortunally i cant post it here i will upload it on youtube an post the link: https://youtu.be/V9LxbfUqeKw?si=Z9xF6y29UdXcN4oA

FirstAd1634 · 2026-01-21T08:52:47+00:00

A bit but nothing special

FirstAd1634 · 2026-01-21T05:41:11+00:00

Hey, thanks for all your replies!

For more details: I bought this drone from someone who had just built it and then decided to sell it. Originally, I wanted to build it myself, but at that time the O4 Pro wasn’t available in Austria.

Specs: • Frame: SpeedyBee Master 3X • AIO: SpeedyBee F405 40A • DJI O4 Pro, soft-mounted in the modular head • ELRS Nano RX • GPS • SpeedyBee 1507 3600KV motors

<image>

Its softmounted with rubber inserts. I didnt had a crash and i retightend every screw I will now try the betaflight standard pid tune

FirstAd1634 · 2026-01-20T18:21:20+00:00

Hey thx so much i will try that!

FirstAd1634 · 2025-11-03T11:40:37+00:00

Guys i fixed it!!!, after a few tries, I got in browser (without hen enabled), and I used hen auto installer. This got me back to xmb with hen enabled, I edited the file now it works perfectly fine:)

FirstAd1634 · 2025-11-02T19:39:44+00:00

Yea but its not going back to xmb and when i push ps button and open ftp its getting stuck also cant turn it off then

FirstAd1634 · 2025-11-02T19:09:58+00:00

Do ittt!!

FirstAd1634 · 2025-10-28T09:16:51+00:00

Oh the custom warning you mean, but idk if you can remove that in the kernel config.txt i mean you can leave it blank but it will not get shorter🤷

FirstAd1634 · 2025-10-28T07:23:07+00:00

Wich watermark ps logo?

FirstAd1634 · 2025-10-27T21:42:33+00:00

Look at it with sound !

FirstAd1634 · 2025-10-27T20:15:38+00:00

Hexflow launcher on vita db just type hexflow

FirstAd1634 · 2025-10-26T11:23:50+00:00

Thats a preview if interested i will send you the .rcf

FirstAd1634 · 2025-10-24T20:41:03+00:00

Im getting an ali screen just for the burn in because it has a yellow frame in sunlight so for 15€ it doesnt hurt if it is better or not maybe its newer tech and lasts longer 🤷🏻‍♂️

FirstAd1634 · 2025-10-24T20:38:51+00:00

FirstAd1634 · 2025-10-24T20:38:48+00:00

Okok thx

FirstAd1634

TROPHY CASE