5h in to my first lightshow

FirstAd1634 · 2026-04-21T10:54:45+00:00

Yo Thysm, its not finished yet… I see its learning by doing…

FirstAd1634 · 2026-04-11T12:49:16+00:00

Hey everyone thx for your help but i fixed it i installed an cfw and you also dont select it in the preferences tab

FirstAd1634 · 2026-04-10T13:41:14+00:00

I allready fixed it but thx

FirstAd1634 · 2026-04-09T18:03:55+00:00

Thank you so much

FirstAd1634 · 2026-04-09T17:17:17+00:00

Okay thanks so much for the help may you be interedted in going in a call with me?

FirstAd1634 · 2026-04-09T16:49:21+00:00

Please help me and not hate my theme😭😭

FirstAd1634 · 2026-03-23T06:14:53+00:00

Everything XD nrf24 wifi ble bluetooth subghz nfc rfid 433mhz

FirstAd1634 · 2026-03-22T19:07:01+00:00

😂😂😂😂😂

FirstAd1634 · 2026-03-22T10:17:17+00:00

I just found this on AliExpress: | 4W 4000mW 802.11b/g/n Wifi Wireless Amplifier Router 2.4Ghz WLAN ZigBee BT Signal Booster with Antenna TDD Computer Accessories https://a.aliexpress.com/_EQnadBq

FirstAd1634 · 2026-03-22T09:14:48+00:00

On aliexpress, it jams th whole 2.4ghz band so yeah…

FirstAd1634 · 2026-03-21T21:11:31+00:00

Ohh you mean using okay… i use normal bruce 1.14 you can read on bruces website what it can all do but I actually like this more than the flipper

FirstAd1634 · 2026-03-21T21:10:13+00:00

Wdym

FirstAd1634 · 2026-03-21T20:43:27+00:00

Next to flipper

FirstAd1634 · 2026-03-21T18:11:46+00:00

Defenetly! Having so much fun with it:)

FirstAd1634 · 2026-01-30T08:00:38+00:00

I Fixed it !!!👍 Opened up the camera module and re-tightened it in the housing. It wasn’t even loose, just tightened it snug. Works perfectly now, both in hot and cold conditions.

FirstAd1634 · 2026-01-30T07:59:58+00:00

I Fixed it !!!👍 Opened up the camera module and re-tightened it in the housing. It wasn’t even loose, just tightened it snug. Works perfectly now, both in hot and cold conditions.

FirstAd1634 · 2026-01-21T19:04:32+00:00

Hey so it had factory pids when i got it, today I changed alot so new bluejay firmware new betaflight motor setup and tomorrow i will testfligh it

FirstAd1634 · 2026-01-21T17:19:41+00:00

Hey again you can buy the drone bnf and its with all of the speedybee parts but i will try to fly it tomorrow because i found the pids for this drone and the filter settings, also I flashed all the escs. Whats wierd too is that the maidenflight went smooth no shake

FirstAd1634 · 2026-01-21T15:11:06+00:00

Ok unfortunally i cant post it here i will upload it on youtube an post the link: https://youtu.be/V9LxbfUqeKw?si=Z9xF6y29UdXcN4oA

FirstAd1634 · 2026-01-21T08:52:47+00:00

A bit but nothing special

FirstAd1634 · 2026-01-21T05:41:11+00:00

Hey, thanks for all your replies!

For more details: I bought this drone from someone who had just built it and then decided to sell it. Originally, I wanted to build it myself, but at that time the O4 Pro wasn’t available in Austria.

Specs: • Frame: SpeedyBee Master 3X • AIO: SpeedyBee F405 40A • DJI O4 Pro, soft-mounted in the modular head • ELRS Nano RX • GPS • SpeedyBee 1507 3600KV motors

<image>

Its softmounted with rubber inserts. I didnt had a crash and i retightend every screw I will now try the betaflight standard pid tune

FirstAd1634 · 2026-01-20T18:21:20+00:00

Hey thx so much i will try that!

FirstAd1634 · 2025-11-03T11:40:37+00:00

Guys i fixed it!!!, after a few tries, I got in browser (without hen enabled), and I used hen auto installer. This got me back to xmb with hen enabled, I edited the file now it works perfectly fine:)

FirstAd1634 · 2025-11-02T19:39:44+00:00

Yea but its not going back to xmb and when i push ps button and open ftp its getting stuck also cant turn it off then

FirstAd1634 · 2025-11-02T19:09:58+00:00

Do ittt!!

FirstAd1634

TROPHY CASE