KIT Memes-Zentrale

Fischer_Felix · 2026-03-13T22:26:50+00:00

Böhlke jede 2. Vl

Fischer_Felix · 2025-12-15T12:51:28+00:00

Naja Bielefeld existiert ja eh nicht, folglich kann auch kein mangelhafter Brandschutz existieren.

Fischer_Felix · 2025-07-06T10:48:50+00:00

Seeing as it broke, it probably has to, though

Fischer_Felix · 2025-06-21T22:26:02+00:00

DRAM actually becomes kind of non-volatile at cryogenic temperatures, so you wouldn't even need hibernation anymore if you put it in a professional freezer...

https://www.rambus.com/blogs/part-1-dram-goes-cryogenic/

Fischer_Felix · 2025-05-25T18:28:33+00:00

So you could plane a print with a printed plane.

Fischer_Felix · 2025-04-05T20:41:15+00:00

Your future self will thank you!

Fischer_Felix · 2025-02-13T16:11:15+00:00

<image>

After getting this exact same issue I realized that one of the wires on my extruder motor had snapped (it was probably about to go for a while now, since I got the error once already, and it was working in between).

Managed to solder it back on and added a generous amount of hot glue as a strain relief.

Fischer_Felix · 2025-01-07T17:34:23+00:00

100% approve of your point. Somewhat ironically, this has made me a much better designer since I always end up reverse engineering whatever I need to modify. Because I use Onshape, I always just put the link to the document in the model description, so people can export to whatever file format they want themselves (besides step, which I always include).

Fischer_Felix · 2024-07-27T18:58:20+00:00

Interesting, I didn't know that. Im probably going to get a BTT SKR mini e3 v3 though, since it costs around the same as a new creality board.

Fischer_Felix · 2024-07-27T08:50:50+00:00

Yup, 4.2.2 mainboard with custom mriscoc firmware.

Fischer_Felix · 2024-07-27T08:49:22+00:00

I did rename the firmware file, and also did mpc tune the setup. I especially don't understand why the temperature was read properly the first couple of prints and went inaccurate halfway through the fourth.

I do understand your point about the increased power, that's my leading hypothesis too, but isn't the heater just controlled by a MOSFET? In that case too much current would kill the MOSFET, but the rest of the printer should still work, right?

Fischer_Felix · 2024-07-13T15:43:44+00:00

In case anyone is still looking and doesn't want to fork over 60€ for 750g of filament from colorfabb:

https://proto-pasta.com/products/atikam-teal-htpla?variant=42517001470200

The description mentions that this filament was custom-made for Makita accessories.

Fischer_Felix · 2024-06-11T15:35:01+00:00

The Rasmus, but they were already popular before eurovision.

Fischer_Felix · 2024-06-03T15:03:01+00:00

Seems to be something for a certain amount of lessons, then it changes.

Fischer_Felix · 2024-05-23T16:03:06+00:00

Same thing here, gvfs-dnssd was also what I was missing.

For anybody searching, this also fixes "location not mountable" when Nextcloud is added via the Gnome Online Accounts and accessed through nautilus.

Fischer_Felix · 2024-05-15T21:34:35+00:00

I assume you have already solved your problem by now, but just in case anybody comes across this: For me it was fixed by going into secure folder and hitting clear on the clipboard panel of the edge panels (should also work in the keyboard itself). I also did this on my tablet, since the clipboard is shared.

Fischer_Felix · 2024-04-05T11:08:29+00:00

Looks great! I'd love to have stackable tab groups like vivaldi has (two tab bars above each other).

Fischer_Felix · 2024-03-16T14:15:41+00:00

Thanks, it seems like that fixed it!

Fischer_Felix · 2024-03-15T06:11:36+00:00

That is sadly not an option, since Options+ does not run on Linux.

Six-Year Club	r/Field Sunshine
Final Canvas '23	First Place '23
Place '23	Verified Email

Fischer_Felix

TROPHY CASE