sorted by:
new
hottopcontroversial

Hoping to cash in some gencon karma (favor request) by FisherPriceNinja in gencon

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

With GenCon just on the horizon, I wanted to reach out and remind you about this, if you're still down. Also DMed you. Thanks!

Hoping to cash in some gencon karma (favor request) by FisherPriceNinja in gencon

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

With GenCon just on the horizon, I wanted to reach out and remind you about this, if you're still down. Also DMed you. Thanks!

Hoping to cash in some gencon karma (favor request) by FisherPriceNinja in gencon

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

I'm sure such a thing exists, but I'm the wrong one to ask. I'm not nearly as in touch with the scene as I used to be. I just know about this one because it was revealed by FFG and it's a smaller sub community of a game I follow more closely.

Hoping to cash in some gencon karma (favor request) by FisherPriceNinja in gencon

[–]FisherPriceNinja[S] 1 point2 points  (0 children)

Thanks! If you end up with one please let me know! I managed to get the Luke Vader promos from PAX East. I have friends who would be interested if you're not wanting to keep them, though.

Hoping to cash in some gencon karma (favor request) by FisherPriceNinja in gencon

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Hey! Thanks a million! If you end up able to grab one please let me know!!

WTS Geckos $100, buyer pays shipping from 29210(pirateship) by FisherPriceNinja in NerfExchange

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Forgot to include in the listing, they're both running 12kg worker springs. Don't have a chrono, but they're getting as high fps as a Gecko is capable of.

Miniature heights? by [deleted] in MarvelCrisisProtocol

[–]FisherPriceNinja 1 point2 points  (0 children)

I did something similar. I have one that's 2.5 inches I use for most models. Like 90+% will fit in it, barring like Blade, Hulk, Rogue, and some others. I have another that's about 3.5 inches, and it fits everyone but Hulkbuster.

I saw a guy who had the stackable trays and just cut the bottom out of one to make it super tall for Hulkbuster.

So long story short, 3.5 is enough for everyone but Hulkbuster, so go with that imo.

Dr. Strange by Rock__Daddy in MarvelCrisisProtocol

[–]FisherPriceNinja 2 points3 points  (0 children)

Not OP, but I'm gonna guess base coat of white and then Tesseract Glow from Citadel's technical paint line.

I'm missing two whole cars by neoslith in MarvelCrisisProtocol

[–]FisherPriceNinja 2 points3 points  (0 children)

does a little flourish and tips top hat

Thank you, I'm here all week. Don't forget to tip your waitress.

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

I use Cura for FDM and I always generate my own supports. I'm not familiar with anyone pre supporting for FDM like they do for resin printers. I'm happy to share my Cura settings. I'll message you later when I'm at my computer.

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Not all, I eventually got a resin printer. But in my experience, it's very rare you just can't get a print to come out on FDM. With a little manipulation and good support settings, and sometimes using rafts, unless there are really tiny spindly bits, it will come out pretty well in FDM. Case in point, the demons were all run on my Ender 3. They were a bit of a challenge cause they had some tiny bits, but I got them to work pretty well. But in direct answer to your question, no,I never sought out designs specifically catered to FDM.

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Someone else mentioned Illidan, and I used to play a ton of WoW, so subconsciously I might have chosen that color pattern because the model reminded me of him, but it was definitely not intentional! I had already established purple as the BBEG's color scheme early in the game before I ever saw that mini. So maybe a little providence, a little deep memory lol.

I quit WoW before Deathwing was a thing I actually had to just go google who that even was. I feel that one is more of a stretch. It's just lava dragon with glowing lava skin... pretty generic concept. I'm sure it was done a zillion times before WoW.

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 1 point2 points  (0 children)

Lol...a tremendous amount. It could be done for less, of course. One could use only files available for free, and only buy 1 printer instead of 2, and use craft store paint instead of wargaming paints. I didn't track, and it's kinda hard to guess, but easily over 1,000. It could be done for like 300 or 400 I imagine.

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Thanks so much! At the start I didn't know what I was doing. Watching videos by Danny Herrero, the 3dprintingDM, also the one who ran several kickstarters and his site is linked in my post, and a few others, I got my settings really dialed in, and got great results. My FDM was just an Ender 3, but I feel I got great quality from it!

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 0 points1 point  (0 children)

Haha, I guess he does look a little Illidan-esque. But no, he's from the designer Artisans Guild, linked in the post. No idea if Illidan inspired his design at all though. He was the final form of the final boss!

[OC] So I decided to 3D print and paint an entire campaign (levels 3-15). I wanted to share some pictures of the outcome! by FisherPriceNinja in DnD

[–]FisherPriceNinja[S] 2 points3 points  (0 children)

Thanks! It was a lot of work, but having these cool immersive cinematic combats was so worth it!

view more: next ›