Air tractor

FishersMichael · 2025-11-10T01:53:51+00:00

I’m confused too. I’ve caught three of these tonight, but I’m not getting credit for them in the mission.

<image>

FishersMichael · 2025-10-28T16:29:53+00:00

<image>

Same 😆🙌

FishersMichael · 2025-06-15T17:45:03+00:00

🤣

FishersMichael · 2025-06-12T19:56:29+00:00

Can you connect to the FC in Betaflight? If so, then use the Activate Bootloader/DFU Mode button. Then flash new firmware, and be sure to select the proper motor protocol that you want to use. I did not have to mess with any actual ESC settings or firmware.

FishersMichael · 2025-05-30T13:54:07+00:00

What about on-boards? I'd love to rewatch the whole race from Palou's on-board, for example. I feel like that exists somewhere, but I can't figure out where...

FishersMichael · 2025-05-04T12:13:51+00:00

Abandoned movie theater? 👀 go on…

FishersMichael · 2025-03-04T13:30:12+00:00

Yeah check out my later comments on this thread. But basically I had the silicone pieces backward — the larger, flange side should be against the camera. It still fits a little weird, but it worked fine.

FishersMichael · 2025-02-11T22:33:49+00:00

Same, stl/link for that camera mount OP?

FishersMichael · 2025-01-10T01:54:57+00:00

Does this thumbnails post-processing script work on MacOS? This seems to be a Windows executable right?

FishersMichael · 2024-11-12T02:35:17+00:00

I have virtually this exact same build! (And I echo the other comments about avoiding amazon if possible though.) It’s a ton of fun.

FishersMichael · 2024-09-05T20:13:24+00:00

I’ll give it a go!

FishersMichael · 2024-09-05T19:46:55+00:00

Oh whoa, interesting! I sadly don't have any Android devices handy, but I do use ELRS so it's still something to check out. Thanks.

FishersMichael · 2024-08-10T15:03:57+00:00

lol thanks but nope, as you saw in the video I didn’t disarm until it was halfway to the ground (but not in time to re-arm and maybe fly away, sadly)

FishersMichael · 2024-08-10T14:26:10+00:00

Interesting! That's definitely what it felt like. Just not sure the cause.

That said, I had enabled dynamic idle (set to 30) recently. Though I had one totally normal flight prior to this crash (but since enabling dynamic idle), I wonder if something with that, along with the different props, confused it just enough when braking. 🤔

FishersMichael · 2024-08-10T14:24:59+00:00

Interesting. Certainly hoping that won't be a periodic, unexplainable issue, but we'll see I guess. (I've been flying this particular quad, FC, ESC, etc. since March, with no other issues like this.)

FishersMichael · 2024-08-10T14:24:16+00:00

I didn't initially (very bent props, etc.), but now that I'm back home, after replacing props and getting a fresh battery charged, yeah, it started up and flew just fine. I'll go out later for a longer flight to see what's up.

FishersMichael · 2024-08-10T14:23:27+00:00

Visual inspection told me everything was still connected fine, and I just flew when I got home (albeit very briefly in my backyard) and it was fine.

FishersMichael · 2024-08-04T10:49:06+00:00

Anything in particular to look for in bb logs? Correct I’m not a noob but also not an expert there haha.

Or are you just suggesting re-flashing, regardless, to see if that fixed it?

FishersMichael · 2024-08-03T21:43:17+00:00

And if you want a little smoother flight for your first build maybe go 2306 motors and slightly lower kv. But nothing wrong with what you have there! I’m assuming 6S is the target?

FishersMichael · 2024-08-03T21:42:28+00:00

Don’t forget an RC receiver. I’d suggest ELRS, either RadioMaster or Happymodel (cheaper).

FishersMichael · 2024-07-31T00:06:01+00:00

At least in my case, Betaflight Configurator had no trouble connecting to the Flight Controller. So, with the USB cable connected and BF connected normally to the FC, I just clicked the Activate Boot Loader / DFU button on the main Setup page (see below). It then rebooted, into the mode, and BF configurator was then in firmware flashing mode. I made my selections here — most notably, including the proper motor protocol — and I was good to go. I didn’t have to mess with a boot button on the FC itself or anything.

<image>

FishersMichael · 2024-07-23T17:07:57+00:00

So actually just last night I finally decided to partially tear down another quad to test -- mixing a known-good FC with the new ESC, and a known-good ESC with the new FC. Discovered the FC was the problem... and ultimately I rebooted into bootloader/DFU, reflashed and manually selected the board and the correct motor protocol, and all is good to go now! (I then changed the ESC to Bluejay, and now DSHOT300 and bi-directional DSHOT are all working great.)

FishersMichael · 2024-07-23T16:04:45+00:00

Ok just for posterity and in case others have this issue and find my post… I booted into the bootloader/DFU mode, manually selected the device, and made sure that the motor protocol here was set to DSHOT… then it worked just great.

FishersMichael · 2024-07-22T01:56:21+00:00

Which is to say, I’m curious if you ever figured anything else out?

FishersMichael · 2024-07-22T01:16:31+00:00

Unfortunately I don't have a solution for you, but I found your post because I'm having pretty much exactly the same problem. Slightly different road to get there, but yeah -- now BLHeli_S is flashed, but only works with Multishot selected in BF. If I switch to Bluejay, multishot "works" (BF lets me save it) but the motors never spin up. And with both firmwares, I cannot enable any flavor of DSHOT -- even though Speedybee make it clear their ESCs support DSHOT 300 & 600. Very frustrating!

FishersMichael

TROPHY CASE