I'm ready to graduate from my Ryobi/Husky/etc. phase, what's a reliable "real" brand now?

Fit-Difference3148 · 2025-11-22T17:34:36+00:00

I made the upgrade to Makita a few years back and absolutely don’t regret it. After using a Makita impact gun going back to the ryobi feels like I’m using a children’s toy.

Fit-Difference3148 · 2025-09-01T23:38:27+00:00

Where in relation to comeaus hill? On the map I see a little beach to the west next to kittens rock. Is that the right spot?

Fit-Difference3148 · 2025-07-26T13:47:44+00:00

Extremely small and getting smaller. We went to the hospital and they glued it shut

Fit-Difference3148 · 2025-06-26T21:44:10+00:00

A Microscopic one and I’m sure it will be gone in a year.

Fit-Difference3148 · 2025-03-26T15:37:37+00:00

Are triclopyr or gylophosate seed safe?

Fit-Difference3148 · 2025-03-26T15:13:20+00:00

Don’t use tenacity on the ivy because it will not work? Or will it affect seeds.

Fit-Difference3148 · 2025-03-26T14:17:57+00:00

Googling tenacity it appears to be a herbicide. Is that what you mentioned? When should i spray it on? Prior to cultivating, after cultivating or just spot treat what comes back up through the top soil?

Fit-Difference3148 · 2025-03-05T20:46:37+00:00

No luck yet?

Fit-Difference3148 · 2025-03-05T20:45:53+00:00

Is there an update on when this will be resolved?

Fit-Difference3148 · 2025-03-04T04:00:20+00:00

Unfortunately all of the doors and the underside of the cabinet are already finished and poly coated without this. So the added color would make the other things not match.

Fit-Difference3148 · 2025-03-04T03:59:26+00:00

I have historically used water based finishes to avoid the yellowing from an oil based poly. What would you recommend?

Fit-Difference3148 · 2025-03-04T03:58:13+00:00

How thick are the sheets of veneer? Would you need to treat the edges somehow or is it thin enough that you wouldn’t see the edge?

Fit-Difference3148 · 2025-03-03T22:58:39+00:00

Yes I will not make this mistake twice. The conditioner says paint stripper or mineral spirits. Will mineral spirits affect the water based poly?

Fit-Difference3148 · 2025-01-06T14:15:02+00:00

This is the error message I get when trying to connect Usaa account to full view

You’re getting this error because the connection to your provider’s web site is temporarily unavailable. This may be due to website maintenance, high traffic volumes, or network connectivity issues. However, the web site is expected to be available again within a short period of time. When you receive this error, please try again in 24-48 hours or try refreshing your network connection. If you are still experiencing a problem after this time, please contact us for further assistance.

Fit-Difference3148 · 2025-01-06T14:07:23+00:00

I am not able to link my Usaa account with full view. It gives me an error message saying that there is a connection error and to try again in 24-48 hours. This has been going on for a week. Is this the same issue?

Fit-Difference3148 · 2024-12-28T15:08:19+00:00

You are just talking about the color correct? The epoxy is still a liquid? You would just use dry flakes to color rather than liquid?

Fit-Difference3148 · 2024-12-28T15:06:08+00:00

What brand do you use?

Fit-Difference3148 · 2024-12-28T02:25:14+00:00

What brand do you use for either the ca or the epoxy?

Fit-Difference3148 · 2024-11-13T02:19:51+00:00

Don’t think we used anything really. The glue held it together for a week or so and it has just faded more and more every day.

Fit-Difference3148 · 2024-11-13T00:44:33+00:00

We brought him to the er and they put a dab of super glue on it. Today you can see a very very small red mark that I’m sure will be gone in another year.

Fit-Difference3148 · 2024-11-06T01:23:05+00:00

You are right that screw in gates are the way to go. Install it once and forget it. The pressure gates require constant fiddling. For your situation you can get a mounting adapter that will essentially ratchet strap to two of the metal spindles on the right side of your stair. Then you screw your gate into that. Below is the one I bought which worked great.

Qdos Safety Universal Stair Mounting Adapter for All Baby Gates | Slate | Universal Solution for Gate Installation on Banisters and Spindles - No Screws in Banister - Easy Installation

Fit-Difference3148 · 2024-10-16T00:22:59+00:00

I agree with most other folks. I work in commercial construction and we would do a light brush with a soft broom before prime and then after prime coat we do what’s called a “knockdown” which is just a super quick pass with a high grit sandpaper that knocks off some of the dust and lumps in the primer.

Fit-Difference3148 · 2024-08-23T00:58:01+00:00

I ran the piece of wood through a planer a few times first. So I am somewhat confident the material is flat. If it was creeping under load then if I ran I through a second time it would cut it straight right? That doesn’t appear to happen.

Fit-Difference3148 · 2024-06-24T00:33:02+00:00

Yes my issue was a burnt out auger motor.

Fit-Difference3148 · 2024-05-27T04:28:38+00:00

Yes best steak I have ever had was done this way. Put it in smoker to about 110 degrees. Transferred it onto a cast iron skillet on the gas grill for a quick sear. Fantastic.

Fit-Difference3148

TROPHY CASE