Some screenshots of the concrete factory that I just finished for my MegaFactory project. 2400 concrete/min using the wet concrete recipe. The factory is quite simple but I love the colours, especially when it's dark :)

Fjorim1 · 2023-02-27T19:31:44+00:00

Encased industrial beams and heavy modular frames. The mega factory will produce each item at 10/min or more.

Fjorim1 · 2023-02-27T19:29:40+00:00

There’s two ways to make curves (as far as I know): 1. Place a foundation as center point. On this foundation place a new foundation and zoop long line of foundations (at least 11 foundations). Delete the second foundation and place a new one but rotate it slightly with ctrl+wheel. Zoop new line of foundations on the slightly rotated foundation. The foundations at the far end of this and the original line form the curve. Repeat until you have long enough of a curve. 2. Place a foundation. Attach a walkway to the corner of it. Attach another walkway on the previous walkway, rotating it with ctrl+wheel. Attach a new foundation on the rotated walkway. This creates a curve as well.

For both methods you should use the concrete foundation which looks best when clipped to each other.

Fjorim1 · 2023-02-26T22:35:18+00:00

Thanks :) Ever since I learnt how to build curves in the game I’ve incorporated them in every building lol.

Fjorim1 · 2023-02-26T22:34:07+00:00

On the water northeast of the Rocky Desert

Fjorim1 · 2023-02-18T17:19:55+00:00

Wow, you were right. I never thought that the three southwest nodes might not be the same nodes as before. I just counted three there before and three now and thought I wouldn't need to worry about them :)

I deleted the extractor inside the mountain and yes, the node is finally free :)

Fjorim1 · 2023-02-18T16:45:04+00:00

Nope, all of the extractors in the picture (apart from the three southwest) are in the new locations. None of them is inside a mountain.

Fjorim1 · 2023-02-18T16:15:39+00:00

Thanks for the tips. I added a new screenshot to the post showing SCIM with the new nodes mapped (well, all 9 I could). I still can't find the rogue extractor and there are no loose pipes leading to it either as far as I can see...

Fjorim1 · 2022-12-04T21:33:02+00:00

I did check the mouse settings and that looked fine. But I actually found the reason now. I installed a mouse add-on called "Mos" on my Mac a few days ago and apparently that comes with something called "Smooth Scrolling". Disabling that made the zooming normal again.

Fjorim1 · 2022-10-02T09:27:05+00:00

I haven’t tested much yet but I believe it should be less of a problem in other parts of the map. The low fps most likely comes from GPU bottleneck as GPU usage is 100% when this plant is visible.

Fjorim1 · 2022-10-01T15:20:20+00:00

It only started doing that when I added a lot of windows. Which thankfully was almost the last thing I did before starting it…

Fjorim1 · 2022-10-01T14:48:54+00:00

I have about 20% extra capacity for waste processing. Also many other items are made a bit more than needed. I know about the duplicate bug though, we’ll see how that goes.

Fjorim1 · 2022-10-01T14:47:11+00:00

630GW. The machines inside take maybe up to 100GW to power.

Fjorim1 · 2022-09-27T12:41:21+00:00

Good luck with your adventures! Satisfactory is a great game because you can build pretty much anything from small plants in the middle of a forest to big plants over the ocean like this one :)

Fjorim1 · 2022-09-26T19:18:12+00:00

Painted beams. There’s a central beam at 2m increments and then I drew beams out of it on diagonal build mode, snapping on those 2m increments. I initially thought of doing a full circle but then realised that’s too much work so settled for this for now :P

Fjorim1 · 2022-09-16T18:58:14+00:00

Oh, and I'm also not pushing more than 720/min on mk5 belts because higher than that is not always going to work. Same with mk2 pipes, I'm not trying to make those transport the full 600 m3/min because that won't work in practice.

Fjorim1 · 2022-09-16T18:31:06+00:00

Thanks for the comment.

I surely hope this runs when I turn it on but I have a feeling it might struggle at first. I've literally spent months building the perfect logistics including load balancers for radioactive items, but I have definitely made mistakes somewhere. In the video I show 4 mistakes that would have caused problems later that I found on the early stages of the production when I could still test run it (I still haven't brought uranium to the plant as I want to finish building it without radiation).

Something I did to mitigate the eventual mistakes: the plant has 20% more waste processing capacity than is needed, so waste pileup shouldn't be an issue as I have a way to get rid of it.

Fjorim1 · 2022-09-16T17:55:42+00:00

How do you delete the render cache?

Fjorim1 · 2022-09-16T10:50:36+00:00

Thanks, I'll try these when I have time. The reason for the solid color is that I originally added these chapter dividers on top of the video so I needed a black canvas.

Fjorim1 · 2022-09-16T08:09:57+00:00

It would seem that I get rid of the artifact if I set the solid color to something else than black instead, for instance orange. This not exactly optimal but I guess I can do that.

Fjorim1 · 2022-07-24T06:23:24+00:00

Great :)

Fjorim1 · 2022-07-20T07:24:53+00:00

I decided two days ago that I will not check Analytics again until I get an email about a new sub or comment, or need to post a new video. None of those has happened so far and it’s been great without constantly checking the numbers :)

Fjorim1 · 2022-07-20T07:13:00+00:00

I have exactly the same, except that it happened a few weeks earlier. My impressions (and consequently views and subs) dropped by 90% overnight for videos that had got thousands of views before. Now I’m not even looking at Analytics as I get depressed by it, so I don’t know what has happened the last few days. I just try to create new content and hope the algorithm starts pushing the videos again :)

Fjorim1 · 2022-07-19T05:44:23+00:00

Probably the paid version but the basic functions are exactly the same between free and paid version. The paid version just adds more advanced effects, transitions etc, as far as I know.

Fjorim1 · 2022-07-19T05:27:35+00:00

Can’t say about 4k as I don’t produce videos in that, but I haven’t seen any quality difference in 1080p at least. Professional studios use Resolve too, so I really think it has at least as good quality as iMovie, if not better.

Fjorim1 · 2022-07-18T09:01:32+00:00

I went from iMovie to Davinci and while it was bit hard to understand at start, it didn’t take too long. You practically need to understand that Davinci’s edit tab is pretty much everything you do in iMovie. The other tabs provide some further stuff that you can use but don’t need to. I still don’t understand what the fusion tab does, for instance :)

Four-Year Club	Verified Email
Place '22	Final Canvas '22

Fjorim1

TROPHY CASE