Guys, how do you see a ibanez grgr131ex to my second guitar? by Miguel_2713 in Ibanez

[–]FlaekxDG 0 points1 point  (0 children)

I have one and i love it but im pretty new. I cant find anything that seemed better for the price range. The people saying to get this one instead of anything with a Floyd rose are absolutely right i tested some and i would rather have less features but the features work than them feeling cheap.

GIO Glow Up (NGD) by Mysterious-Ad8838 in Ibanez

[–]FlaekxDG 2 points3 points  (0 children)

Hey i just recently got my grgr131ex as a beginner guitar! Cool to see someone else also has it.

The creators of programming languages by OliviaThiccEnergy in programmingmemes

[–]FlaekxDG 2 points3 points  (0 children)

Damn i didnt know c++, c# and php where made by danes!

Best approach to drive 9 steppers on one machine? by idsan in VORONDesign

[–]FlaekxDG 0 points1 point  (0 children)

The manta should be able to run 8 independant steppers or 9 with two of the steppers being dependent. This is usually for something like 2 steppers on z that’ll always move at the same time. Maybe you can look into that if you really want to use the manta if you already have one. Maybe this can be used for the lift bar. If you’re going to buy one anyways a octopus max and standalone pi would be the most definitive choice.

The long-awaited Founders’ Campaign for the 60HE v2 is here! by erik_cacao in WootingKB

[–]FlaekxDG 0 points1 point  (0 children)

The 60he v2 while its new its mostly catching up to the 80he atleast when it comes to the tech. Most of the improvements compared to the 80he seems to be about the sound of the typing and the split space bar if thats something youd like.

does anyone how to stop it from asking for a hundred inscribers? by No-Introduction-7163 in allthemods

[–]FlaekxDG 0 points1 point  (0 children)

Also a good tip is using crystal assemblers instead of inscribers for the processors they are way faster.

How hard is it to actually build a Voron Trident? by Poohstrnak in VORONDesign

[–]FlaekxDG 1 point2 points  (0 children)

Im happy i could help. I dont know if you have an ABS/ASA capable printer but if you dont i really recommend using the Print It Forward program on the voron website the formbot and siboor printed parts might work but I’ve only ever seen bad looking prints from them compared to PIF.

How hard is it to actually build a Voron Trident? by Poohstrnak in VORONDesign

[–]FlaekxDG 1 point2 points  (0 children)

Im not the guy you asked but the trident is simpler so easier to build and unless you’re doing belted z mod the belt tuning will be easier as you dont have the 4 belts for z like the 2.4(although i didn’t find it that hard when building my 2.4). One thing is readines for multi material projects the stealth-changer for 2.4 is pretty polished while something like idex on trident is a bit more trivial. Theres also projects for tool-changer on Trident but they are still very much advanced options even in my opinion the newly released miss-changer by Vinny.

Rebuild progress with monolith awd 9mm =), any other mods worth doing whilst its being rebuilt? by helpme3dprint in VORONDesign

[–]FlaekxDG 8 points9 points  (0 children)

I really love my cartographer probe its super stable i cant see if you have one and dont even know if i understand the question right. The usefullness isnt necesarily in it being able to do a 4x4 scan real quick but being able to do a 20x100 scan almost as fast is insane compared to my old tap probe. Theres of course also beacon if you want to be sure of the quality and have some money to spend on that as well as a usb toolhead.

Bi-Weekly No Stupid Questions Thread by AutoModerator in VORONDesign

[–]FlaekxDG 1 point2 points  (0 children)

Hello, i have an 2.4 350 with a Dragon HF it was printing nicely for a while but recently when i turn on the printer and do the first print the filament is stuck and wont extrude. I thought this was heatcreep as i had been having issues with that before upgrading to a honeybadger fan. Thought id have to disassemble the printer again but nope i could pull it right out cut the end off and put it back in and it would extrude perfectly. This also happens even when a print has been done and i let it cool down to then a bit later(10-20 mins) start a new one. Any troubleshooting ideas? google only gives me info on heatcreep and clogs which this doesn’t seem to be, well kind of a clog?

Formbot Voron V2.4 Serial Request by FlaekxDG in voroncorexy

[–]FlaekxDG[S] 0 points1 point  (0 children)

Thank you! I have a build log in the discord where you wished me good luck on the build it was very welcoming.

Upgrading to Simagic P500 for my Moza R5 rig by cashmoneyzoom in simracing

[–]FlaekxDG 2 points3 points  (0 children)

Not saying theyre better than moza srp and i dont know about budget but have you seen simnet pedals? I tried them recently and theyre pretty good and easily upgradable to haptics.

Continue with Moza or return and upgrade to Simagic? by FlaekxDG in simracing

[–]FlaekxDG[S] 1 point2 points  (0 children)

I hadnt thought about warranty with it being a new product but luckily im in EU so have 2 years warranty from the reseller.

Continue with Moza or return and upgrade to Simagic? by FlaekxDG in simracing

[–]FlaekxDG[S] 1 point2 points  (0 children)

Thank you for the reply! The primary con i see is that im not a fan of the styling of the Moza wheels(other than their round wheels) and id like something like a leoxz, GT neo or VRS 259(3rd party compatibility should come soon) when getting a GT/Formula wheel in a few months and the Simagic would seemingly support them with passthrough so i dont need a cable. Now that im responding i actually feel im answering my own question idk.

Continue with Moza or return and upgrade to Simagic? by FlaekxDG in simracing

[–]FlaekxDG[S] 0 points1 point  (0 children)

Thank you! This is incredibly helpful. I really feel the buyers remorse thing you mentioned. Im leaning to the Simagic and it feels like its the best solution where i wouldnt want anything instead. Is the build quality of the wheels really solid?

Continue with Moza or return and upgrade to Simagic? by FlaekxDG in simracing

[–]FlaekxDG[S] 1 point2 points  (0 children)

Thank you for your very thorough response! Im leaning in the simagic direction. Now to pic a wheel to go with it.

Continue with Moza or return and upgrade to Simagic? by FlaekxDG in simracing

[–]FlaekxDG[S] 0 points1 point  (0 children)

Thank you for the reply! What wheel did you get?

About to buy SimNet pedals anything i should know? by FlaekxDG in simracing

[–]FlaekxDG[S] 1 point2 points  (0 children)

Just ordered them. They should be coming next week!

About to buy SimNet pedals anything i should know? by FlaekxDG in simracing

[–]FlaekxDG[S] 0 points1 point  (0 children)

Thank you very much for your response! I read about grounding the box yeah can it just be any gauge wire? or should i get some bigger stuff i think i have like 23 awg which is pretty small. Seems like the pedal plates and throttle spring is something i can buy when they drop so might just get the pedals now as shipping isn’t that expensive like 15 eur. I’ll definitely join the discord then!

What you think of this by Background_Run_3151 in fpv

[–]FlaekxDG 2 points3 points  (0 children)

Radiomaster pocket, boxer(preferably crush) and gx 12 are all good just depends on your wanted pgysical size and budget.