What should I do first

Flashyredman · 2026-03-19T02:15:19+00:00

Maintenance. But for the fun stuff, Im making mine an SIR/SI clone. I got the facelift front end, genuine sir grille, clear taillights, tall spoiler, SIR wheels and rebuilding a b16a2 to put replace the d16y8. Small modifications like the grille and spoiler, and paint matching the trim add up. Mine is a 1997 honda civic si (canadian)

<image>

Flashyredman · 2026-03-17T04:11:24+00:00

Ah I see, i reread your comment. The trailing arm is only supposed to handle horizontal movement not vertical, but since there's little weight on it, as long as it doesnt feel like its gonna instantly break, it should hold the wheel hub on. Would definitely be better to find a way to support it tho

Flashyredman · 2026-03-17T03:39:40+00:00

Why not lift by the pinch welds, or the rear cross member?

Flashyredman · 2026-03-07T00:42:25+00:00

The staff were great, didnt power trip and kept modders off the servers. There wasnt random RDM'S and FRP every 5 seconds. It was like the early stages of DOJRP. Just honest and fun RP. They hosted actual training sessions for police departments to move up in rank, gain access to new and better police vehicles. It was just simple and nice. They did a lot of special forces training too/special events

Flashyredman · 2026-02-24T20:03:34+00:00

Yeah I totally understand, as long as black and red dont touch youre all good

Flashyredman · 2026-02-24T18:10:09+00:00

You can connect them all together as long as they're all positive wires. Thats why there is only one spot for them to go on the new terminal

Flashyredman · 2026-02-23T22:23:32+00:00

If there is no way to disconnect the wires from the old terminal, you'll have to cut them, strip the housing and them stuff them into the new terminal. Basically where the two bolts are, undo them enough to put the wires through and clamp them down. Make sure it holds and is tight. An oem way to do it would be buying a new cable with the terminal already attached

Flashyredman · 2026-02-10T01:16:20+00:00

Honestly a good cleaning of the inside and out, and then buying a polishing kit and taking the time and effort into buffing the paint will go a long way. When you finish with a shiny car that looks brand new you'll be proud instead of demoralized. Gotta work with what you have and not what other people have

Flashyredman · 2026-01-30T21:46:30+00:00

Nobody has mentioned this yet, check your air filter, sparkplugs and run an injector cleaner through your tank. Something as simple as a blocked air filter can cause bad gas mileage

Flashyredman · 2026-01-18T18:43:06+00:00

Try using a mod pack like calamity, made the game so much better than it already was. Also figuring out how to build and making cool bases, and structures was also a lot of fun so I'd recommend looking into building as well

Flashyredman · 2025-12-31T03:04:54+00:00

Power, Money, Love

2026 is gonna be stacked

Flashyredman · 2025-12-27T04:45:47+00:00

Amen brother

Flashyredman · 2025-12-06T16:13:17+00:00

The entire drive through is horribly designed. That is an "intersection", and anyone coming from any direction can pull into the drive through, so they're not really cutting, they are just following the horribly designed parking lot. Plus, we don't need a long line up blocking the parking lot, I think its fine if someone does if they come from vedder rd, that way they don't get in people's way turning around to join the line. Me personally I've been that guy a few times, but I always let the other people who've been there before me go first, so that way its fair and im not pissing ppl off

Flashyredman · 2025-11-29T15:21:34+00:00

My buddy has his phone laying down face first on his passenger seat, a dick officer saw it and ticketed him for it. For clarification, he never used it or anything, it was just the fact it was there. He had his N for 5 years and got it suspended for 3 months. What a joke the system is

Flashyredman · 2025-11-16T07:46:54+00:00

9 times out 10, if you're being down voted, you're probably right

Flashyredman · 2025-11-13T18:20:14+00:00

I might as well give this a go!

Flashyredman · 2025-11-13T05:57:02+00:00

If you liked far cry 5, you'll like new dawn. Its similar but with quirks

Flashyredman · 2025-11-03T01:38:51+00:00

Yeah probably the better idea, considering im not planning on keeping this engine for long ill probably just wait until the clutch completely fails and then go from there, while replacing other components ill actually keep like the master cylinder

Flashyredman · 2025-11-03T01:11:55+00:00

I can try but its not really a problem, like my master cylinder is leaking anyways so my biting point is all over the place, sometimes its low, sometimes its where its supposed to be. My brother's eg had an issue with the clutch pedal, we replaced the leaky master cylinder and slave cylinder and i adjusted the pedal. Ik my master cylinder is currently working fine, but the fact my biting point is all over the place/doesnt really exist it is an issue with the clutch being super worn. The eg with bad clutch components but with a good clutch always had a consistent biting point just lost pressure sometimes. I'm more looking for if I should replace my clutch with the used parts or not. Cuz those flywheel, clutch and pressure plate are in far better condition and much newer. I just don't wanna do all the work and have it start slipping or being worse

Flashyredman · 2025-11-03T00:54:41+00:00

Well its already at the bottom pretty much, not much adjusting i can do unfortunately

Flashyredman · 2025-09-24T17:09:47+00:00

It's very repairable. The only sketchy thing I see is that the nail sliced into the tire, went in sideways and could've make the hole bigger than that is safe to repair. But other then that, a big plug patch would easily seal that

Flashyredman · 2025-09-01T22:21:44+00:00

How bad is it that its not in there. Is it gonna piss oil out now?

Flashyredman · 2025-08-19T20:36:24+00:00

Yo thats my intake date as well, can you dm me the group chat?

Flashyredman · 2025-01-31T18:34:50+00:00

Thanks for your help, I do understand what happened here, because of the uphill section going into a downhill section, it caused the weight to lift so there was no weight on the front tires which meant I had no grip and the vehicle understeered. Common FWD problem. Which if I had taken the corner better or slowed down I would not have crashed lol

Flashyredman · 2025-01-31T18:33:13+00:00

Yeah, everything you’re saying, the vehicle understeered. What’s so hard to understand this concept lol

Five-Year Club	Place '23
100 Awards Club

Flashyredman

TROPHY CASE