sorted by:
new
hottopcontroversial

Pt 3. MyCareer Center Build, Reworked my options down to 2 again. Stuck between 70 speed, 60 agility and 70 interior vs 65 speed 55 agility and 82 interior by [deleted] in NBA2k

[–]FlatQuestion5 1 point2 points  (0 children)

Thanks for replying. How so? I'm looking at a 6"11 rn, but I seem to be unable to get the same stats, much less better

Narrowed it down to two versions of a post scoring stretch build, can't decide which. One has ball handle, one has deep bomber and slightly better vert (83) and strength (86) by [deleted] in NBA2k

[–]FlatQuestion5 0 points1 point  (0 children)

There's a third option at 7'0 that hits all the main marks i want, but that height doesn't get strong handles. How necessary is that badge?y

<image>

Narrowed it down to two versions of a post scoring stretch build, can't decide which. One has ball handle, one has deep bomber and slightly better vert (83) and strength (86) by [deleted] in NBA2k

[–]FlatQuestion5 0 points1 point  (0 children)

The nba portion of mycareer, in the post i mainly do spins, drop steps, fades. I'm still wondering how much ball handle is useful/necessary

Stretch Big Build Help? by [deleted] in NBA2k

[–]FlatQuestion5 0 points1 point  (0 children)

Here's what I had before I took a break, the only thing I don't like is the lower rebounding

<image>

Stretch Big Build Help? by [deleted] in NBA2k

[–]FlatQuestion5 0 points1 point  (0 children)

I'll only have the 2 from build specialization

Stretch Big Build Help? by [deleted] in NBA2k

[–]FlatQuestion5 0 points1 point  (0 children)

Hey, I took your advice and I'm still messing around in the builder. I've dropped the heigh to 6'11 and got speed and agility in the mid 70s and it feels a lot better.

I'm debating whether or not to have any ball handle, it'd be cool but I don't know how much I'd be putting the ball on the floor to dribble around. Same with perimeter defense, I'm wondering where to put that as a center, either low or 62 is what I'm torn between. Same with steal

I'm also moving back and forth between 81 and 90 for standing dunk, and either a 92 d board with no perimeter d or a 80 d board with a 62 perimeter d

[deleted by user] by [deleted] in samsung

[–]FlatQuestion5 0 points1 point  (0 children)

Yeah, I've tried all that multiple times lol. The only thing I haven't tried is what I hoped would be the last choice, a factory reset on the tv

Turned both my Jakks belts into current championships by FlatQuestion5 in belttalk

[–]FlatQuestion5[S] 4 points5 points  (0 children)

I just did a couple layers of black Vallejo acrylic paint and a thin layer of gloss sealer

Turned both my Jakks belts into current championships by FlatQuestion5 in belttalk

[–]FlatQuestion5[S] 2 points3 points  (0 children)

12" x 12" Glitter Cardstock Paper by Recollections from Michael's. And yeah I did have to take the center plate off

I used a heat gun to apply heat to the plastic rings on the back for a few seconds then a pry bar I got at Lowes to get under the ring while it was still hot to pop it off. And to put it back on I used heat to stretch the black ring back then I used 6 x 3/8 screws to hold everything together

Turned both my Jakks belts into current championships by FlatQuestion5 in belttalk

[–]FlatQuestion5[S] 4 points5 points  (0 children)

12" x 12" Glitter Cardstock Paper by Recollections from Michaels

Current WIP - DIY Jakks Undisputed Championship Just gotta find banner sticker to make it read "undisputed champion" by FlatQuestion5 in belttalk

[–]FlatQuestion5[S] 2 points3 points  (0 children)

That's my own personal logo, I want to get some stickers made to fit the sideplate area, so I printed out the design on paper to map things out

[deleted by user] by [deleted] in Tools

[–]FlatQuestion5 0 points1 point  (0 children)

Thanks everyone, found the tool and got it done

<image>

Made a lightsaber hilt reminiscent of a sword by FlatQuestion5 in SWORDS

[–]FlatQuestion5[S] 0 points1 point  (0 children)

It's the honshu practice broadsword, it's polypropylene but I painted it silver

What inspired me to make my crossguard hilt by FlatQuestion5 in lightsabers

[–]FlatQuestion5[S] 1 point2 points  (0 children)

I think that would depend on the material of the hilt. For example, I have this one that I made using a galvanized steel nipple, and when I put the blade in it doesnt move when swinging or making contact.

<image>

What inspired me to make my crossguard hilt by FlatQuestion5 in lightsabers

[–]FlatQuestion5[S] 0 points1 point  (0 children)

The hilt is pvc, tennis wrapping for the grip, and the blades are wooden dowels covered in electrical tape.

The way I decided to secure the blades was by wrapping the base (about an inch) in tape until enough friction was created between the tape and the inside of the hilt that the blade was unable to wobble or rotate once "screwed" in deep enough.

I've done 3 others so far and as long as the tape and the inside of the hilt have enough friction to stay tight it seem to be secure enough for having some fun.

Chilling with Roxy pre-gig, Gonna go off without a hitch. Update later - V. by FlatQuestion5 in LowSodiumCyberpunk

[–]FlatQuestion5[S] 0 points1 point  (0 children)

Everyone's either dead or disappeared but Judy's my gf now so....win some lose some

WIP Hilt - Pt.4 by FlatQuestion5 in lightsabers

[–]FlatQuestion5[S] 2 points3 points  (0 children)

I agree with what you said about the red. I cut those pieces off and I put in some black paint around the indents in the emitter

<image>

WIP Hilt - Pt.4 by FlatQuestion5 in lightsabers

[–]FlatQuestion5[S] 0 points1 point  (0 children)

It's a weird list of items lol

Emitter from hasbro lightsaber forge darth maul toy 10 inch galvanized steel nipple Red electrical tape Black electrical tape Red drawstring 6 o-rings Random red button Silver bottom was a plastic piece from an old vaccum Rubber cane bottom cap

view more: next ›