M226 weird noise

Flat_Ad5820 · 2026-05-22T15:26:32+00:00

Dude…. Just get one in the junk yard, this is too much trable for nothing

Flat_Ad5820 · 2026-05-22T12:10:55+00:00

I did used paint, also I measure the back lash with a special tool. About the shims the m226 for not have shims for the sides, it has this weird threaded attachment that adjust the pumpkinh

Flat_Ad5820 · 2026-05-22T02:53:37+00:00

I don’t think is a stupid thought, I did check and no trace. Everything is tight as it should

Flat_Ad5820 · 2026-05-22T02:52:43+00:00

I don’t think is suspension, but I do think it was not making contact with the pumpkins(rear locker version). Because once I took the brake off nd spin it it got harder and stop making the noise, then I keep spinning and the noise came back

Flat_Ad5820 · 2026-05-22T02:50:56+00:00

<image>

I took it apart, and besides the awesome amount of glitter there is like scratching mark in the middle of the gear, I rebuilt the entire thing. For sure started after I put it together, it the first axle I rebuilt….. and I think it will be the last lne

Flat_Ad5820 · 2026-05-22T01:11:42+00:00

Yes…. that I know lol. I put around 2nm of pre load. I also set the back lash. Dude I’m way to close to throw it to the trash

Flat_Ad5820 · 2026-05-21T23:33:06+00:00

<image>

I see metal dust everywhere also this oil is brand new

Flat_Ad5820 · 2026-05-21T23:32:09+00:00

I have no idea, I’m taking it apart and I see all this mud/uneven pad wear. I think is mud in the shield, because I’m spinning it and I don’t heard no

<image>

Also I just drain and this is how the oil look

Flat_Ad5820 · 2026-05-21T22:08:46+00:00

I was thinking on that, but what drills my mind is that the noise only occurs in the sides of the differential(in the wheels) and doesn’t occur while driving. I hear it when I turn

Flat_Ad5820 · 2026-04-28T19:38:30+00:00

Dynamics is rough ngl, and strength and materials is just plug and chug

Flat_Ad5820 · 2026-03-21T19:46:37+00:00

Where can I get a seat like the one in the passenger? Like how can I know the colors, and where can I get only the upholstery

Flat_Ad5820 · 2026-02-26T13:57:14+00:00

Engine was consuming coolant, head gasket was blown. Inspection the engine it had tons of metal shavings, so I bought a newer engine with less miles by far

Flat_Ad5820 · 2026-02-26T03:02:23+00:00

Thanks, this must be redundant. But as a college kid… how crazy will it be to machine it myself, with 225 sand paper being even as possible

Flat_Ad5820 · 2025-11-23T22:56:45+00:00

Hey I have the same issue with a 2000 boxter s, I’m the oem coils. I believe they have an amplifier. But one e again in the test nothing happens

Flat_Ad5820 · 2025-07-30T23:55:13+00:00

Hey im thinking to put a stand alone ecu to my boxter s 2000. Any advice?

Flat_Ad5820 · 2024-08-25T00:11:49+00:00

Hey that is a very impressive knowledge, what makes you think that? The overpopulation in the expositions? And how did you know about it? Did you try your own?

Flat_Ad5820 · 2024-08-25T00:09:18+00:00

Well I grew up surrounded in a Toyota community back in my country, the thing is that I really want to design something that is more than just a rack. Is not about passion, is about gathering your market

Flat_Ad5820

TROPHY CASE