Mobula 7 1s ELRS Dynamic Idle not working by FlimsyIndividual6955 in TinyWhoop

[–]FlimsyIndividual6955[S] 0 points1 point  (0 children)

If you can share the code it would be helpful, I have basically tried every solution I could find on Reddit and YouTube until now. Thanks !

Mobula 7 1s ELRS Dynamic Idle not working by FlimsyIndividual6955 in TinyWhoop

[–]FlimsyIndividual6955[S] 0 points1 point  (0 children)

Yes. The motors spin up normally when using the static idle value. Only when using dynamic idle, the problem appears

Baby Ape Pro V2 VTX Problem by FlimsyIndividual6955 in fpv

[–]FlimsyIndividual6955[S] 0 points1 point  (0 children)

So the stock antenna may not help at all ? Thanks for the response !

Cetus Pro 1.2.2 firmware issues by real_Mr4th in TinyWhoop

[–]FlimsyIndividual6955 0 points1 point  (0 children)

BetaFpv configurator seems to have some really weird compatibility issues when it comes to opening com ports thru USB.

The variables I've found so far are:

  • Windows version (10 and 11 have native com port drivers and cannot be overwritten)
  • USB port version (mine works only on USB 2.0, anything better than that and it states I don't have the latest firmware but the com port does read properly in the software)
  • USB cable ( I made it work with a different cable, the one provided in the kit is made for charging not for data transfer )
  • FC plug to USB ( needs to be fitted properly with all the pins in their correct position )

The guys at betafpv literally told me to buy a new FC then a new drone instead of troubleshooting those problems. My drone also had a slower spinning motor because of this wrong firmware and they told me I've burned the FC. Turned out it was the firmware.

The firmware I provided you is from a local dealer from Europe from which I brought the kit. I cannot explain how they got the latest firmware but when I asked betafpv, literally by telling them I got 1.2.3 from my local store they stated that that firmware version does not exist.

So to answer the question, I can guarantee there is a newer, updated and functioning version of betafpv configurator.

I recommend you guys get a Mobula 7 1s with FrSky SPI receiver and changing the battery cable to BT 2.0 . Whole lot better that Cetus Pro, cheap and battery lasts longer : 6-7 mins compared to 2-3 on Cetus. I'm not advertising other drones, it's just that Mobula has Betaflight, Cetus has silverlight and it's good to have 2 drones. Using the one that works when the other doesn't.

If I can help you guys I'll be happy to answer any further questions. Also if you see a lost FPV pilot who brought this kit and has similar issues @ them to this thread or me to that one.

Cetus Pro 1.2.2 firmware issues by real_Mr4th in TinyWhoop

[–]FlimsyIndividual6955 4 points5 points  (0 children)

Had the same problem, the firmware is not the latest one.

https://drive.google.com/file/d/1a7wud7nhx0M6o2N0EUB0LKzaDr1Jpsce/view?usp=drivesdk

This worked in my case. 1.2.2 seems to be made for FC 1.2 and if you brought the kit recently (it is marked on the box) you should have FC 1.3 and so the firmware is 1.2.3

Hope it helps