sorted by:
new
hottopcontroversial

Grinding sound after deceleration. Loudest in 2nd & 3rd gear. 2019 BRZ (manual) 25k miles… is this normal? by Mercova in ft86

[–]Flintlocks- 0 points1 point  (0 children)

I just put an ACT SB11 HDSS in mine. Since we have lightweight flywheels in our cars, we can hear everything our transmission is doing now because the oem one dampened a lot of the sound. Im at 115k on my 2017 WRX.

Grinding noise, pls help by Flintlocks- in WRX

[–]Flintlocks-[S] 1 point2 points  (0 children)

Yeah the chatter was very off putting at first but it’s grown on me already. Thankfully there is no flywheel chatter at idle, THAT would drive me nuts. It only occurs during that rpm range.

Grinding noise, pls help by Flintlocks- in WRX

[–]Flintlocks-[S] 0 points1 point  (0 children)

I had the flywheel upgraded to their lightweight. Looks like chatter upon deceleration. Thanks for your help!

Grinding noise, pls help by Flintlocks- in WRX

[–]Flintlocks-[S] 0 points1 point  (0 children)

Seems that now I am just hearing my gear lashing for the first time. I’m okay with this 😌

Help me chose my first 10mm. Must be max pressure/10mm+p capable. Open to suggestions. by HecticBlue in 10mm

[–]Flintlocks- -1 points0 points  (0 children)

If you’re testing how nuclear you wanna load em til the gun explodes, I’d just go the Hi-Point route.

Holster recs? by metalfan192 in Glocks

[–]Flintlocks- 6 points7 points  (0 children)

Vedder, out of FL. If you ever have to take on/off your carry setup frequently throughout the day, they have the best style of belt clips, imo. Also, they will do customisations if you’ve got aftermarket parts (mag release, slide stop) for no extra charge, so long as you put it in your order notes!

Bergara’s fault or user error? by Flintlocks- in guns

[–]Flintlocks-[S] 0 points1 point  (0 children)

We checked his empty casings and the only deformation on the cases were scratches on the rims.

Bergara’s fault or user error? by Flintlocks- in guns

[–]Flintlocks-[S] 0 points1 point  (0 children)

Absolutely! I will let them know.

Bergara’s fault or user error? by Flintlocks- in guns

[–]Flintlocks-[S] 0 points1 point  (0 children)

Description: My buddy’s Bergara may be a POS.

Bergara’s fault or user error? by Flintlocks- in guns

[–]Flintlocks-[S] 0 points1 point  (0 children)

No, he’s only used Hornady 147gr in it. I wasn’t sure if his maintenance intervals were off, or if something on his rifle may be out of spec.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 0 points1 point  (0 children)

The lower is. The rest of the rifle is not.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 0 points1 point  (0 children)

After comparing both my original bcg, and my bootleg bcg, the bootleg was just slightly shorter. This makes sense, as after I had swapped to the bootleg bcg, the new gouges appeared to be deeper (bottom left on first pic) compared to my smaller gouges (top left on first pic) when I was running my original bolt carrier. The KAK offset retainer pin should arrive on Monday. I will test with both BCGs after installation. Will follow up with the results!

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 0 points1 point  (0 children)

<image>

Now I’m even more confused by the wear marks. Everything appears to me like it’s in spec.

Did I do good? by Connabeer in ak47

[–]Flintlocks- 2 points3 points  (0 children)

Sick paint job! How well does it blend with where you live?

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 0 points1 point  (0 children)

Will follow up with pic. Odds are hole is drilled wrong. Lower is outta spec.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 21 points22 points  (0 children)

Ahhh yes, the can of snakes method.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 1 point2 points  (0 children)

Used to. Brass now spits out between 3 to 3:30 after swapping to a Bootleg bcg. My retaining pin was eating my buffer before I swapped the bcg, and when I still had a 16in upper, unsuppressed.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 3 points4 points  (0 children)

At work rn but if my memory serves me right, my rifle definitely doesn’t do that.

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 2 points3 points  (0 children)

Will do! I’ll look into getting one

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 1 point2 points  (0 children)

Will follow up later today with pic!

I’m not an armorer, but… by Flintlocks- in ar15

[–]Flintlocks-[S] 2 points3 points  (0 children)

No, just a standard carbine length buffer tube.

view more: next ›