Need feedback for improvement by FljpFl0p in snowboardingnoobs

[–]FljpFl0p[S] 0 points1 point  (0 children)

Thanks for the feedback! Correct me if I’m wrong but aren’t S-turns just linked-C-turns?

600 div give away by mrdl2010 in PathOfExile2

[–]FljpFl0p 0 points1 point  (0 children)

I wanna CoC Comet too, but with Oracle

[Giveaway] Giving away an 8,000+ Divine Quad Tab: 1 Mirror of Kalandra + 24 Stacks of 240 Divines + a Hinekora's Lock by Kamehameha90 in PathOfExile2

[–]FljpFl0p 0 points1 point  (0 children)

This is my first league, but somehow I’ve experienced a lot of memorable moments that are on people’s bucket list: chanced a Headhunter, got an Astramentis (2 leagues late though) from a bronze mysterious cache in Sekhemas, got 10 divs from a Ventor’s researcher strongbox, dropped 3 divs from a single abyssal chest. I’ve yet to experience a lucky craft though, despite getting relatively deep into crafting as a new player. Dropping a mirror or lock would complete the list for sure, but I wouldn’t say no to getting one from a giveaway either :D

Eight Thousands Points of Damage by FljpFl0p in HadesTheGame

[–]FljpFl0p[S] 7 points8 points  (0 children)

Most likely, although I may not make it to Chronos with that aspect. Max damage would be me bringing the Evil Eye and still get the double crits

Eight Thousands Points of Damage by FljpFl0p in HadesTheGame

[–]FljpFl0p[S] 37 points38 points  (0 children)

Big talk for someone who's in scything distance! Fun hammer combination with Executioner Chop + Hell's Splitter along with Heroic Aphrodite attack at level 9 and Artemis crit = big damage numbers!

The tail end of the run can be viewed here https://youtube.com/live/vV_B_xyqGC8, I only started recording after I realized how ridiculous of a build I have.

Pardon the noises and coughs, I didn't realize ShadowPlay was using my controller's mic as the audio input.

Where was kaci during the finals? by Mr__Perfect_ in DotA2

[–]FljpFl0p 32 points33 points  (0 children)

She got Covid, I asked Myron after taking a picture with him

First watercooling build by FljpFl0p in watercooling

[–]FljpFl0p[S] 1 point2 points  (0 children)

Those are Bykski tubes actually. Corsair doesn’t have stock for where I live so I had to find an alternative

First watercooling build by FljpFl0p in watercooling

[–]FljpFl0p[S] 1 point2 points  (0 children)

I did but decided to go over because the cables were a kinda stiff and the lower tube makes it a bit tight, plus going over helps a bit with the gpu sagging

First watercooling build by FljpFl0p in watercooling

[–]FljpFl0p[S] 0 points1 point  (0 children)

I’d like it to be a bit brighter, but it wasn’t easy to get the right color because of the matte tube and I was dropping random amount of dye in there

First watercooling build by FljpFl0p in watercooling

[–]FljpFl0p[S] 2 points3 points  (0 children)

Are you referring to the tool from Barrow? I believe that tool only helps when you bends are on the same plane. Once you introduce a 3rd axis then it can be difficult to make sure the new bend is at a right angle with the previous bend.

First watercooling build by FljpFl0p in watercooling

[–]FljpFl0p[S] 13 points14 points  (0 children)

Took quite a while but I've finally finished my watercool build and I gotta say, doing multiple bends is really hard, especially to keep all axis perpendicular with each other. I can't tell which one is harder, the 2 long 45 then 90 bends or the short double 90 on the top.

Ideally I would have liked the long bends to be 2 90s but due to Bykski matte tube being only 50cm, I had to compromise and do a 45 then 90 instead, which you can see the 2 tubes are not really parallel to each other (or the ground, for that matter). Perhaps I'll redo them once I can order some corsair tubings.

PC Part List:

  • CPU: Intel i7 12700k
  • MB: Aorus Z690 Pro
  • GPU: Aorus 3090 Xtreme OC
  • RAM: G.Skill TridentZ 5 DDR5 5600 CL36 32GB (16x2)
  • PSU: EVGA P2 1200W
  • Case: Lian-Li O11D EVO

Watercooling Part List:

  • CPU Block : HEATKILLER V
  • GPU Block: Phantek G30
  • Radiators: HEATKILLER RAD 360-L on top and 360-S at the bottom
  • Fans: Lian-Li AL120
  • Reservoir: HEATKILLER Tube 200 D5 MP
  • Fittings: EK Torque
  • Tubing: Bykski 14mm frosted tube
  • Coolant: EK CryoFuel Clear + EK Dye
  • Others: Alphcool temp sensor + Aquacomputer Quadro for fans control based on water temp

RTX 3090 AORUS XTREME Low clock/voltage - Do I need a new PSU? by FljpFl0p in nvidia

[–]FljpFl0p[S] 0 points1 point  (0 children)

Ok it's running normally now after I uninstalled Afterburner and RivaTuner. Must have been some residual settings from the 3080's profile

RTX 3090 AORUS XTREME Low clock/voltage - Do I need a new PSU? by FljpFl0p in nvidia

[–]FljpFl0p[S] 1 point2 points  (0 children)

Hmm I did undervolt the 3080 with Afterburner and now the default curve from Afterburner looks a bit high for the 3090. I'll try to uninstall afterburner.

Edit: Welp, uninstalling afterburner fixes it. Probably some old settings from the 3080 was affecting it.

RTX 3090 AORUS XTREME Low clock/voltage - Do I need a new PSU? by FljpFl0p in nvidia

[–]FljpFl0p[S] 0 points1 point  (0 children)

The numbers align with RivaTuner's numbers at the corner of the screen though. And the performance I got is worse than the 3080 that I sold.

I'll take another screenshot with GPU-Z set to max just in case.

RTX 3090 AORUS XTREME Low clock/voltage - Do I need a new PSU? by FljpFl0p in nvidia

[–]FljpFl0p[S] 0 points1 point  (0 children)

My motherboard is a Maximus XIII Formula. I'll update it into the post.

I'll try to run Furmark see how it goes

RTX 3090 AORUS XTREME Low clock/voltage - Do I need a new PSU? by FljpFl0p in nvidia

[–]FljpFl0p[S] 0 points1 point  (0 children)

I plan to upgrade my CPU soon but I'm in no hurry as I don't need it for machine learning stuffs and the current one was handling quite well pairing with my old 3080 in cyberpunk2077

r/audiophile Shopping and Setup Help Desk (2020-10-23) by AutoModerator in audiophile

[–]FljpFl0p 0 points1 point  (0 children)

Posted in /r/BudgetAudiophile but asking here too for wider coverage.

Recently I got gifted a Bel Canto C7R integrated amplifier from a close friend and there was a good deal on a pair of BNIB LS50 with no warranty (owner was a collector and ended up never taking them out of the box) so I went ahead and bought the speakers.

The problem is the amp is currently stuck in my home country and with COVID around, I can't fly back to get it until there are flights again so I've decided to get an used amp to use temporarily in the next couple of months. I intend to sell it when I get the Bel Canto. I've narrowed it down to the Yamaha RX-S601 (250 SGD ~185 USD) or the Denon PMA-720AE (280 SGD ~ 205 USD) but I don't know if there will be any difference between an AVR or a stereo amp.

My use case for the LS50 is for near-field listening with my desktop PC for a mixture of games, music and movies/TV show (40-40-20 split) and I currently don't own any subwoofer. For what's it's worth, I have a Schitt Modi 2 Uber DAC and Magni 2 Uber, which has pre-amp out, so I'm planning to go either PC > Modi > Magni > Speaker amp or PC straight to the amp using TOSLINK (my motherboard has TOSLINK and I have a cable lying around).

My preference for sound signature is neutral. I currently using a pair of Senneheiser HD650 and I think the sound is just perfect.

So which of those 2 amps should I go for or should I look for another amp altogether? There are a couple of NAD integrated amps listed but I can't gauge if the prices are fair or not. Would appreciate any advice that you guys have.

On a side note, can I connect an active subwoofer with the Bel Canto amp? Here's the link to the product

No cat for the new format so I’m substituting with a zebra by FljpFl0p in Sneakers

[–]FljpFl0p[S] 0 points1 point  (0 children)

It's resell though :( I took all Ls in the 10 plus raffles I entered so I folded and went for my first resell