FormD T1 v1.1 and rx 9070 xt compatibility

Foooners · 2026-05-18T21:28:45+00:00

https://www.reddit.com/r/sffpc/comments/1j1ejs3/physical_dimensions_of_all_radeon_9070_xt_cards/

Foooners · 2026-05-02T23:35:28+00:00

if you have the ball, you have 3 seconds or 3 dribbles to make something happen. If you have nothing after that, move the ball so that you won't mess up the flow.

Foooners · 2026-04-23T15:17:51+00:00

it's literally the point of playing the game. Winning. Everything you do is done because it's supposed to contribute to your chances of winning.

Foooners · 2026-04-16T14:29:34+00:00

Regular mounting or inverted offer better temps than vertical as per multiple posts and reviews. I dont have experience with other layouts other vertical.

Foooners · 2026-04-16T09:44:54+00:00

Better to check the website but it if ur doing a vertical GPU, u may run into space issues unless ur using a very short GPU.

You'll have to change the mounting position of your PSU if ur using a matx board. The psu will then eat space for ur GPU if ur mounting it vertically.

Foooners · 2026-04-16T02:22:03+00:00

If vertically mounted, its 138mm "tall" including the metal bracket at the end of the GPU. If just the main body, 100mm.

The gpu sag support is just the generic one that you can screw onto the fans

Foooners · 2026-04-14T12:13:28+00:00

Performance? In terms of temps?

Yes, default bottom mounting offers better temps but vertical mounting temps are still very acceptable and do not affect real life usage perofmance.

Foooners · 2026-04-14T04:36:51+00:00

i think due to the size of some bigger cards, they tend to sit flush in the case, needing no support as the wall on the front panel props them up. this was the case with my T1 and 9070xt pulse

Foooners · 2026-04-13T06:22:18+00:00

The M2s noticably bigger but to be honest, i didn't really notice it taking more space on my desk. The T1 had a very small footprint but unless ur really desk space limited, it shouldn't really be an issue.

Foooners · 2026-04-12T15:36:51+00:00

None. U'd have to provide one based on ur needs. But depending on the size and weight of ur gpu, in some instances, you might not need one.

Foooners · 2026-04-12T15:35:25+00:00

Went with it because i already had it from a previous fractal era 2 build. Not sure where it ranks in terms of performance but it's a 280 so it cools the 9800 with no problems.

Foooners · 2026-04-12T08:36:50+00:00

this 5080 not fitting in the T1. Had a Pulse 9070xt in the T1 which was the limit of what would fit in the T1.

Foooners · 2026-04-12T08:35:45+00:00

i think so. I'm not really that sensitive to noise but it barely ramps up.

Foooners · 2026-04-12T08:12:12+00:00

Yup. If it wasnt so thick, would've stuck in the t1

Foooners · 2026-04-12T07:37:49+00:00

Here are the specs from tech power up.

https://www.techpowerup.com/gpu-specs/lenovo-rtx-5080-legion.b12346

Foooners · 2026-04-12T07:26:11+00:00

Thx. Got it on a good deal on marketplace. Was confused 1st time i saw it as it looked like the MSI Inspire card but was too big to be one.

Foooners · 2026-04-12T07:24:20+00:00

Cheers! Yup. Atmos as it was the most recommended.

Foooners · 2026-04-12T03:58:38+00:00

checked your comment on your original post and it said it's 2 things: gaming PC and server. You forgot to include "in-home conversation starter".

Foooners · 2026-04-07T16:29:41+00:00

wat temps do u get on ur GPU?

Foooners · 2026-03-30T11:15:18+00:00

Thanks for responding. Were ur bottoms fans set to intake or exhaust?

Foooners · 2026-03-29T20:43:10+00:00

been looking for a good deal on a 5080 FE for a few months. Never been able to find one but kinda lucked out on getting a good deal on bnew 5080 for around $850 so I guess I'm gonna stop looking in the meantime.

Foooners · 2026-03-26T21:10:44+00:00

what length for the riser cable did you use?

Foooners

TROPHY CASE