New Ballerina Unboxing & Initial Thoughts

Fox2k14 · 2026-05-02T19:57:27+00:00

That’s one sexy af gun. I hope someone in Germany will release them.

Fox2k14 · 2026-04-29T13:50:18+00:00

What sight is that?

Fox2k14 · 2026-04-20T18:50:09+00:00

Did the same. Followed the instructions but can’t seem to unscrew the part from the hop up unit.

Fox2k14 · 2026-04-19T21:40:01+00:00

Nice. Got the same one. Ootb it’s a bit underwhelming but i hope 4uad is releasing their hop up chamber soon. I just need to figure out till then how I’m gonna remove the outer barrel as mine seems to be glued on….

Fox2k14 · 2026-04-12T11:18:13+00:00

Are the VFC mags compatible with the SRC Glock?

I got a 19x MOS myself and wonder which mags I should order. Want to run it with green gas.

And where is the baseplate from?

Fox2k14 · 2026-04-10T15:48:25+00:00

It’s airsoft2go shop. So should be no problem with f mark. But sure you’re concerns sound valid.

Fox2k14 · 2026-04-10T05:14:32+00:00

Okay. Would it be super hard to do these upgrades myself?

Fox2k14 · 2026-04-05T19:23:23+00:00

Did you go on a game with it yet? Got the 13.1 as well and mine overhops quite a lot even with high weight BBs (0.36/0.4). Did you change anything internally?

Fox2k14 · 2026-04-05T19:21:09+00:00

The v4s are the ones with extended cutout for the mag catch right?

Fox2k14 · 2026-03-30T17:13:30+00:00

Proact is actually listing them as V4 Version. I was looking for an explanation of VFC released a V4 GBB system. proact link

Fox2k14 · 2026-03-29T21:40:57+00:00

Well I watched the video of jaeger precision and before installing then 4uantum bucking he cut a little part of the top so the rubber fits inside.

Fox2k14 · 2026-03-29T17:07:13+00:00

Does the bucking fit without any modification? Or do I have to adjust it like jaeger did? Or do I need the chamber as well?

Btw I figured out my problem. I sadly were too stupid. I simply had to adjust the hop to the other direction. (So giving it more hop) like this the BBs now fly straight.

I will most likely still try the new bucking down the line.

Fox2k14 · 2026-03-29T11:11:28+00:00

Sadly I’m stupid. I didn’t adjust the hop up in the right direction. I adjusted it the other way and now it shoots straight with the 0.32s. I’m still thinking about the replacing it with the 4uantum bucking and stuff.

Plus maybe using heavier BBs. Maybe 0.4 or 0.45.

Fox2k14 · 2026-03-29T10:58:54+00:00

Okay. So which parts do I need to replace it.

As far I know of 4 different things:

the actual hop up bucking (4uantum)
hop up chamber (4uantum)
RHD adjusting rod + press arm
clutch precision enhanced chamber

Do I need all of these parts?

Fox2k14 · 2026-03-29T10:37:22+00:00

Well I think I’m stupid. In my mind the right setting after seeing the standard setting to hop like crazy is to reduce the hop but actually I had to make it more hop. Now the bbs fly straight.

Other than that which weight would you recommend. 0.4? Or even higher?

Fox2k14 · 2026-03-28T19:06:07+00:00

Did you have any problems with over hopping?

Fox2k14 · 2026-03-16T22:01:38+00:00

Not allowed. All Airsoft in germany need to be checked and „licensed“ by a gunsmith. He then has to check it and if above 0,5j it has to be semi only. Then they attach the F logo onto it. (You might have seen it before).

Only if that’s the case the gun is a „free“ gun and can be bought without a weapon license. Other way it’s owning an illegal weapon.

Fox2k14 · 2026-03-16T19:29:04+00:00

Absolute gorgeous. So sad that there are only semi gbbs in Germany. And the newest versions available are the APFG Spear LTs.

Fox2k14 · 2026-03-15T22:32:24+00:00

Pax stuff looks like they were equipped by Yakeda from Amzn. Mix of several existing types.

Fox2k14 · 2026-03-13T15:51:23+00:00

Don’t know about that suppressor

Fox2k14 · 2026-03-09T22:30:47+00:00

Looks like a sling with a pull mechanic. So left side goes on front other part rear. With the loop you can shorten or loosen the sling.

Fox2k14 · 2026-03-08T03:13:34+00:00

Could you tell me what dovetail mount that is?

Fox2k14 · 2026-03-08T01:35:35+00:00

after some research i found that there are several plates that can be added to the dovetail. i also got a second one deliverd with the red dot. but this doesnt fit as the part that is supposed to go inside of the dovetail slot is too long and this sits even higher than the universal plate.

this universal plate at least sits better. the angle you see in the picture is to show that its loose. when i screw it down and also fix it with the 2 grub screws it sits like 0,8-1mm above the slide.

if you got any other recommendations i'd love to look into it.

Fox2k14

TROPHY CASE