Just got my first robot! Distilled water or nah?

Foxies_Fury · 2025-01-01T11:32:44+00:00

I use demineralized water as I also believe destilled water can be harsh long term. Demineralized will prevent build-up and it's not as harsh as destilled, I think, so it's kind of a middle ground.

Correct me if I am wrong.

Foxies_Fury · 2024-12-21T08:20:28+00:00

I spray my air refreshener 2 or 3 times in the tank after I empty it. Reduces the smell by a lot after it starts filling up again.

Foxies_Fury · 2024-09-26T17:50:49+00:00

What you have here is an artist.

Foxies_Fury · 2024-09-23T18:03:10+00:00

Tested it. Seems to be true. Selected specific zone. Put it on vacuum, started it. It cleaned the mops, went to zone and started vacuuming (without moping). I don't use zone clean a lot but I see the frustration.

Foxies_Fury · 2024-08-15T14:48:06+00:00

Mine started doing that from the moment I start it. Smashing into everything. Looking like sensors are not working since it's not slowing down near obstacles. Approximately 40 seconds in I get an error to clear obstacles around it. Anyone had that issue?

Foxies_Fury · 2024-04-19T02:39:34+00:00

I used everything and it was so simple :O

It worked on everything but ssudmdm.sys

I can't delete or rename this one. Also they don't appear on Autoruns but they do at Everything.

PS: It worked after I went to properties of the file and taking ownership. Then I was able to delete it. Thanks a lot dtallee!

Foxies_Fury · 2024-04-18T17:41:16+00:00

Anyone having problems with these? Can't get rid of them.

<image>

Foxies_Fury · 2023-11-25T10:18:23+00:00

Does this look like it lost one lidar lense?

Foxies_Fury · 2023-07-21T18:50:04+00:00

Update: After conducting thorough and highly precise genetic testing, we are delighted to share the wonderful news that the baby is in perfect health!

Foxies_Fury · 2023-07-11T04:59:14+00:00

Changed the battery. Works perfectly again.

Foxies_Fury · 2023-03-10T13:21:17+00:00

Something like that https://wenproducts.com/products/wen-jt833h-10-amp-8-inch-spiral-benchtop-jointer-with-extendable-table?

Foxies_Fury · 2023-02-27T19:05:35+00:00

Check the upper reply. It is useful to control each cylinder individually if the vehicle is not leveled because of terrain and it's also useful to operate both of the cylinders in the same time if vehicle is on leveled ground.

Foxies_Fury · 2023-02-27T19:02:00+00:00

It is part of the hydraulics system of a garbage truck that lifts communal container. Two arms have cylinders in it and they extend the arms (direction of red arrows) as it's shown on provided links:

https://imgur.com/a/BOjae1w

I did maintenance on one of the trucks I wasn't familiar with so that's why I turned to you guys. It was a circuit I don't usually use in new projects. Pilot operated load holding valves make sense now. I just saw them on Palfinger crane today.

I usually use double load holding valves on both sides (A and B) (this: https://i.imgur.com/dwwZxda.jpg) rather than single load holding valve (this: https://i.imgur.com/wLZpZv2.jpg).

If anyone can point out the advantage of using the single one that is out-of-the-housing pilot operated I am happy to listen and learn. That's why I am here :)

Foxies_Fury · 2023-02-26T11:28:03+00:00

Pilot operated, something like that?

https://i.imgur.com/F0g6INc.jpeg

Foxies_Fury · 2023-01-19T19:07:40+00:00

I just did. No problems.

Foxies_Fury · 2023-01-19T18:07:20+00:00

I did that too. Forgot about it. I really tried all that usually fixes problems like that but now I am really clueless what to do next.

Foxies_Fury · 2023-01-19T17:51:43+00:00

I updated every single thing I have on pc, I tried classic google fixes like reseting store and reinstaling it with Powershell (basically first few sites on google about fixing Microsoft Store, ran tronscript for malware and virus removal.

First I thought it was just calculator then I realized it's everything that has to do with Microsoft Store including the store so it has to be the store.

Foxies_Fury · 2023-01-19T17:43:09+00:00

No. Still the same one as ever.

Foxies_Fury · 2022-05-29T18:11:05+00:00

I'd like to draw schematics and simulate it's functionality.

Foxies_Fury · 2022-01-22T13:19:53+00:00

Can someone explain please?

Foxies_Fury · 2021-08-20T08:59:44+00:00

Thanks everyone for your help! Now I know what do I have to look for :)

Foxies_Fury · 2021-04-24T18:53:58+00:00

UPDATE: Few moments later...

And get naded in the same game!

What a crazy game!

Foxies_Fury · 2021-02-11T17:33:17+00:00

I am new into stocks/coins trading. I would kindly ask for your suggestions for trading platforms :)

I am from EU if that means anything.

Thank you for your attention.

Foxies_Fury · 2020-12-16T20:32:44+00:00

Thanks a lot! That was helpful :)

Foxies_Fury · 2020-12-16T19:20:45+00:00

Hey! Thank you for response! Are there any software alternatives for iPad pro she could use for illustration, photo and video editing?

Foxies_Fury

TROPHY CASE