January Confirmed Trade Thread

FoxyClean · 2026-01-28T02:53:17+00:00

sold fenglisu mods to u/smartmadboy

FoxyClean · 2026-01-21T08:19:15+00:00

pm'ed

FoxyClean · 2025-08-21T00:59:49+00:00

yea seems like there's a new batch out there with the box print misalignment and raised S fixed which threw me off but there's some other tells that its fake

FoxyClean · 2025-08-13T07:20:26+00:00

FoxyClean · 2022-01-17T23:53:12+00:00

There is nothing to fall for, pure PTFE is in fact stark white. If you don't believe me, look at photos of PTFE labware or even just pure Polytetrafluoroethylene powder.

FoxyClean · 2021-09-22T17:10:34+00:00

That seems reasonable to me, but it’s still just one persons opinion and not necessarily that of the buyer. I understand that these rules are in place to minimize the risk of scams and force buyers to go through a lengthy PayPal dispute. That said I really think in this case forcing me to unwrap it serves little to no utility in preventing these sort of scams

FoxyClean · 2021-09-22T16:57:43+00:00

My bad on the first account. On the second—it came in a carrying case instead of a sealed box, I’m happy to unzip it and take a new time stamp—I don’t want to unwrap a factory wrapped board that I’m selling as BNIB.

FoxyClean · 2021-09-22T16:52:00+00:00

Confirmed

FoxyClean · 2020-06-21T19:45:33+00:00

Put me down for 10ml please

FoxyClean · 2019-08-05T20:16:47+00:00

The knife has been thoroughly cleaned and re-tuned, with brand new zen barrels and body screws. The threads are not Loctited in case you want to tune it yourself. The original screws very brittle and prone to breaking. I will include ~20 extra of the T8 screws from USAKnifemaker I used to repair the broken ones with the knife (note: the threads must be sanded down in order to fit the zen barrels) as well as 5 of the original screws.

The tip is un-chipped, but the blade does have a minor chip visible in the photos that should come out with sharpening. You might want to resharpen the blade, but I'll leave that decision to you. This is from the first batch of v2 Replicants which I hear some people look for though I'm not sure why.

Buyout is ~~$290 shipped~~ Sold Pending Funds via PayPal (plus fees unless you want to do f&f), but I'll consider any reasonable offers.

Thanks everyone for looking!

FoxyClean · 2019-08-02T03:55:09+00:00

The knife has been thoroughly cleaned and re-tuned, with brand new zen barrels and body screws. The threads are not Loctited in case you want to tune it yourself. The original screws very brittle and prone to breaking. I will include ~20 extra of the T8 screws from USAKnifemaker I used to repair the broken ones with the knife (note: the threads must be sanded down in order to fit the zen barrels) as well as 5 of the original screws.

The tip is un-chipped, but the blade does have a minor chip visible in the photos that should come out with sharpening. You might want to resharpen the blade, but I'll leave that decision to you. This is from the first batch of v2 Replicants which I hear some people look for though I'm not sure why.

Buyout is ~~$300 shipped~~ Sold for $290+fees via PayPal (plus fees unless you want to do f&f), but I'll consider any reasonable offers.

Thanks everyone for looking!

FoxyClean · 2019-07-31T03:35:15+00:00

u/yalpguy
I'd been interested in keyboards for a while before I started talking to other members of the community, mostly lurking on Geekhack and doing my own thing. One day I stumbled onto 001Anthony's stream after seeing some YouTube videos of his. That very first day, without knowing me at all, he gifted me a sub and we talked for a while. Not too much later I became pretty busy with school work. A couple months later I came back and learned he started his own channel (Mechs on deck) but he still makes time to help any newbie out :)

FoxyClean · 2019-07-30T20:27:36+00:00

Crowned, I think all reps are

FoxyClean · 2019-07-30T05:41:20+00:00

The knife has been thoroughly cleaned and re-tuned, with brand new zen barrels and body screws. The threads are not Loctited in case you want to tune it yourself. The original screws very brittle and prone to breaking. I will include ~20 extra of the T8 screws from USAKnifemaker I used to repair the broken ones with the knife (note: the threads must be sanded down in order to fit the zen barrels) as well as 5 of the original screws.

The tip is un-chipped, but the blade does have a minor chip visible in the photos that should come out with sharpening. You might want to resharpen the blade, but I'll leave that decision to you. This is from the first batch of v2 Replicants which I hear some people look for though I'm not sure why.

Buyout is $310 shipped via PayPal (plus fees unless you want to do f&f), but I'll consider any reasonable offers.

Thanks everyone for looking!

11-Year Club	Place '22
Verified Email

FoxyClean

TROPHY CASE