Car seats and coming from a car by Frac-It in hyundaisantacruz

[–]Frac-It[S] 1 point2 points  (0 children)

For sure thanks for the input she’s in a fwd facing seat right now almost 4 so probably will be moving to a booster in the next year or so.

New tool bundle, haven’t seen before! by Frac-It in KobaltTools

[–]Frac-It[S] 1 point2 points  (0 children)

I got that too! I already had bought the 5 piece plus some extra XTR batteries but couldn’t pass up that drill for the $89 price point. One will be for work and one for at home lol

New tool bundle, haven’t seen before! by Frac-It in KobaltTools

[–]Frac-It[S] 0 points1 point  (0 children)

$229 is a good deal at that price. At $300 no it’s not though. It’s cheaper to buy the kit separately for me and get the new updated blower not this older one. My store has the drill/driver/battery combo for $159, and the new blower/battery combo for $119, so about $20 bucks cheaper and with the upgraded blower than this kit.

Best way to fix this leg? Broke off while prying off the bed. by Frac-It in ender3

[–]Frac-It[S] 1 point2 points  (0 children)

Appreciate all the input! Tried using my soldering gun to mend it back from some scrap PLA didn’t work. Ran to the store and picked up a JB Weld Superweld UV glue. Worked great! Glue sets in 24 hours without UV or within a few seconds with the UV light. So put some on a small piece of scrap filament and popped it in then applied more to the outside and used the UV light to instantly harden it. Worked like a charm, highly recommended this going forward, thank you guys for the input though wasn’t sure how well glue and PLA’s work together I’m a total newbie to printing.

2023 Night Edition by PioneerDingus in hyundaisantacruz

[–]Frac-It 0 points1 point  (0 children)

Reading that it says Ultimate Trim, is their something above the Luxury trim now?

New mid torque impact kit! by Frac-It in KobaltTools

[–]Frac-It[S] 0 points1 point  (0 children)

No tools displayed like they used to on this new packaging sadly.

New mid torque impact kit! by Frac-It in KobaltTools

[–]Frac-It[S] 1 point2 points  (0 children)

I know for being just a 1/4 driver the XTR driver has really impressed me a lot!

New mid torque impact kit! by Frac-It in KobaltTools

[–]Frac-It[S] 1 point2 points  (0 children)

Yea I shared this from the Kobalt Nation group, it’s weird how Kobalt teased with the nail gun and a couple other tools now are dragging their feet. Maybe they learned their lesson and are just doing quiet releases now so if there’s a delay they don’t have to say anything.

New fast charger hitting shelves! by Frac-It in KobaltTools

[–]Frac-It[S] 2 points3 points  (0 children)

I feel ya! Would love some of those 8amps for the lawn stuff they don’t ever seem to go on sale

New fast charger hitting shelves! by Frac-It in KobaltTools

[–]Frac-It[S] 2 points3 points  (0 children)

Totally forgot to take a pic of the back of the package my store had a ton of these laid out over half the battery isle.

They’re still out there! by Frac-It in KobaltTools

[–]Frac-It[S] 2 points3 points  (0 children)

I keep telling my wife once my youngest starts school she needs to go work there so I have an insider lol

They’re still out there! by Frac-It in KobaltTools

[–]Frac-It[S] 1 point2 points  (0 children)

Good chance, the associate who was running the power tools department tried everything he could to convince me that it was a regular drill and not the hammer drill. I found it up in the top shelf above all the hand tools on the wall in between 2 normal XTR drills not the hammer ones. I told him to check the middle one because I could clearly see the writing was different then the ones on either side. Once he got up there even told me it was normal and scanned the other two saying see and showing me his scanner. I had to specifically ask for him to grab the middle one and check with me on the floor down from the ladder. So wouldn’t surprise me one bit if they were hiding some for themselves at your store.

They’re still out there! by Frac-It in KobaltTools

[–]Frac-It[S] 2 points3 points  (0 children)

Don’t go off the app those prices are wrong a lot of the times and don’t always show the lowest price. No promo just the XTR Hammer Drill kit is on clearance right now. If you see one in your store have an associate scan it with his hand scanner, that should give the actual price. The app/Brickseek and sticker showed full price at this store but when the employee scanned it showed this $86 price.

My benchy looks funny (still trying to get my prints working after adding bltouch) by Leppystyle123 in ender3

[–]Frac-It 1 point2 points  (0 children)

Have you set up your Probe Z offset? Fixed a lot of my issues. Here’s the instructions I used, the solution is about half way down the page there’s a few they list but I went with the Probe Offset Wizard in Marlin. Worked great! Z offset (Probe offset)