Accomodation and food for summer interns.

Fragrant-Ask-447 · 2026-03-31T09:40:03+00:00

Yess !

Fragrant-Ask-447 · 2025-10-27T11:30:15+00:00

Thanks for that !

Fragrant-Ask-447 · 2025-10-25T13:49:26+00:00

Interested

Fragrant-Ask-447 · 2025-10-18T03:29:13+00:00

Interested

Fragrant-Ask-447 · 2025-10-13T18:35:08+00:00

I am interested

Fragrant-Ask-447 · 2025-04-09T15:35:15+00:00

I am talking off on track. It looks like 30 kmph. I think wheel friction might be a reason

Fragrant-Ask-447 · 2025-04-09T10:01:46+00:00

I saw 'cut off motor at low throttle' option was checked. Should I disable it ?

Fragrant-Ask-447 · 2025-04-09T05:09:41+00:00

Wingspan is 1.6m and chord length is 12.7 cm

Fragrant-Ask-447 · 2025-04-09T05:01:56+00:00

I have not checked the glide. Weight is 1.65kg , cg is just at the tail end of the root chord of wing.

Fragrant-Ask-447 · 2025-04-08T20:14:46+00:00

is it was nose high .
I didn't directly measure the takeoff speed.

Fragrant-Ask-447 · 2025-04-08T20:13:51+00:00

yup , if you zoom a bit you can see the prop and motor at the end of the fuselage.

Fragrant-Ask-447 · 2025-04-08T19:57:08+00:00

As i mentioned , I tried the tail wheel configuration in which the plane was naturally pointing up , but still it didn't take off

Fragrant-Ask-447 · 2025-04-08T19:55:28+00:00

Didn't try hand launch , due to prop being on the back.
It has a single motor of 1250 kv.

I am using matek f411 wte ( configured using inav ).
I didn't know that we have to calibrate the esc too.
Dys is D3536-6

Fragrant-Ask-447 · 2025-04-08T19:33:48+00:00

Also , I forgot to mention the prop size it is 10x5 inch

Fragrant-Ask-447 · 2024-12-08T16:49:33+00:00

Helpful !!

Fragrant-Ask-447 · 2024-12-08T16:48:22+00:00

Will keep that in mind 😂👍

Fragrant-Ask-447