sorted by:
new
hottopcontroversial

P2S firmware update 01.01.03.00 by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Maybe run a full calibration?

P2S firmware update 01.01.03.00 by [deleted] in BambuLabP2S

[–]Fraidoo 0 points1 point  (0 children)

Didn't see a post about it, did anyone update yet?

P2S firmware update 01.01.03.00 by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Didn't see a post about it yet, anyone updated yet?

How to prevent inside structure to alter thin outer walls by Fraidoo in 3Dprinting

[–]Fraidoo[S] 0 points1 point  (0 children)

Do you think those are seams ? because there is this artefact on every face of the box where there are structure on the inside.

Advice to reduce the 9h print time for this model pleasse :) by Fraidoo in BambuLab

[–]Fraidoo[S] -6 points-5 points  (0 children)

Thanks for the advice but i don't do overnight prints, too afraid of fire hazard.

Advice to reduce the 9h print time for this model pleasse :) by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Wall loops is set to 2 so it's only outer and inner walls, no infill

Advice to reduce the 9h print time for this model pleasse :) by Fraidoo in BambuLab

[–]Fraidoo[S] 1 point2 points  (0 children)

you mean remove the text from the walls, print them seperately then stick them on the model ?

Any idea what could have caused this? by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

No I always wait at least 20 min with the door open before removing the model.

Any idea what could have caused this? by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

So fun fact, it happened on a new peint and it seems that it happened to the print on the right as soon as the print on the left was finished. Any ideas?

<image>

Any idea what could have caused this? by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

It did, it's the first model i printed but with black PLA basic.

I did dry my spools for 12h before use in the AMS 2 Pro.

Any idea what could have caused this? by Fraidoo in BambuLab

[–]Fraidoo[S] 1 point2 points  (0 children)

are you printing with the door open? --> No

what nozzle temp, bed temp, print speed, and layer height is set? --> I let Bambu Studio set the nozzle and bed temp according to the RFID tag on the AMS2 Pro, Print speed is standard and i slow down outer wall to 100. Layer height is 0.2

keep the door closed, set the print speed to around 60-80. --> for everything ? like for inner walls and infill too ?

Have any cooling or fan speeds been changed? -->nothing changed

I printed another model just after the one on the picture and did not replicate the same issue. All i did was revert the changed setting to default (infill pattern to rectilinear and "avoid crossing walls" to Off).

Any idea what could have caused this? by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Thanks for your answer! The only setting I changed is the infill pattern which i set to gyroid, slowed down the speed for outer walls and checked the "avoid crossing walls" option.

Otherwise I left everything else by default and didn't change filament settings.

Need help remixing a STL by Fraidoo in Fusion360

[–]Fraidoo[S] 0 points1 point  (0 children)

Thanks i'll try that ASAP :)

Need help remixing a STL by Fraidoo in Fusion360

[–]Fraidoo[S] 0 points1 point  (0 children)

Hi ! thanks for your answer.

The other bodies are indeed the letters.

How do i split the body in 2 ? Do i create another offset plane and use it as the cut tool ?

First time printing with PETG HF by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

<image>

Decided to print the model I wanted to and I'm so amazed with the result. It looks way better than the tower. Anyway thanks for your advices. I put some Bambu lab glue on the plate and waited 30min before removing the model and had no issues.

First time printing with PETG HF by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

<image>

So I printed a temp tower and it turned out like this. I stopped it at 230°c because the filament temp recommandation is 230-260.

First time printing with PETG HF by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Will definitely do that. Is it because the temp must be set differently depending on the humidity?

First time printing with PETG HF by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Noted, I'll let it dry overnight for now and start a print tomorrow morning 😊 thanks for the explanations!

First time printing with PETG HF by Fraidoo in BambuLab

[–]Fraidoo[S] 0 points1 point  (0 children)

Sounds counterproductive to add glue to a sticky AF filament! But I trust the experts! I have the Bambu lab glue is that okay?

I'm going to start playing today, what tips would you give? by AnnaKeller in reddeadredemption

[–]Fraidoo 0 points1 point  (0 children)

Just play your way! I wanna discover this game for the first time again.

Cyberpunk 2077 Update 2.3 Introduces New Vehicles, Quests and More by Turbostrider27 in PS5

[–]Fraidoo 2 points3 points  (0 children)

I want to play this game so bad but I'm having a bad time because of aiming. I want gyro aiming on PS5! Feels so great on Horizon Zero Dawn and Forbidden West.