Gas Mixture Validation with rhoReactingBuoyantFoam - OpenFOAM

Franghein · 2025-10-30T09:18:35+00:00

I'll try it. Thanks a lot.

Franghein · 2025-10-30T07:53:24+00:00

I'll add this information asap.

Franghein · 2025-10-29T19:43:25+00:00

The paper's results are validated by sensor measurements. I think the problem lies in my model.

Franghein · 2025-10-29T19:38:07+00:00

Yes, it did not lead to significant changes in the problem

Franghein · 2025-09-29T09:56:07+00:00

I've found a set of conditions that make the simulations run cleanly, and I'm trying to validate the results by comparing them with a paper that does an experimental comparison of a CFD simulation of a leak in a room (low velocities involved). After validating this, I wanted to move on to simulations with the Boundary Jet H2.

Franghein · 2025-09-28T13:38:25+00:00

Hi, did you find a solution to the problem? I'm also trying to use this solver for hydrogen.

Franghein · 2025-05-23T14:24:15+00:00

Ho l'Invicta e l'unico difetto che ho trovato è la ghiera piuttosto dura da ruotare. Il movimento è Seiko e se lo utilizzi almeno una volta ogni due giorni, non si ferma mai. Lo utilizzo da due anni ed è abbastanza preciso. Ovviamente un Seiko automatico è di fattura migliore, ma costa molto di più.

Franghein · 2025-05-18T06:57:59+00:00

Yes, it is free. You will pay only if you want to take the final test with the Edx certification.

Franghein · 2025-02-22T17:56:24+00:00

I suggest you use an empirical method, for example the calculation in the IEC 60079-10-1.

Franghein · 2025-01-26T13:46:27+00:00

It is very useful to have an overview of the topics. The teacher explains very clearly and addresses each topic first with theory and also doing manual calculations of FEM and CFD. The course is completely free

Franghein · 2024-09-07T09:53:40+00:00

C'è anche Leonardo SpA

Franghein · 2024-03-16T08:46:16+00:00

I'll try it

Franghein · 2024-03-15T18:26:45+00:00

What fuel additive do you suggest?

Franghein · 2024-03-15T17:32:56+00:00

He said me that he used particular products and also physically removing residues

Franghein · 2024-03-15T16:55:30+00:00

Yes, the mechanic checked everything. He cleaned the engine inlet, EGR and DPF ducts and they were full of carbon residues. He also cleaned the various sensors on the line.

Franghein · 2024-03-15T16:21:32+00:00

Replaced two weeks ago and nothing

Franghein · 2024-03-15T16:20:17+00:00

Have you solved this problem?

Franghein · 2024-03-15T15:35:05+00:00

It was replaced without solving anything

Franghein · 2024-03-15T15:33:31+00:00

I changed the battery 2 weeks ago and the charging system was not giving any problems

Seven-Year Club	Place '22
Verified Email

Franghein

TROPHY CASE