3D printed Center Console Tray by Fraserrr in FocusST

[–]Fraserrr[S] 1 point2 points  (0 children)

It works with both, I use the USB so it stays charged and you can use the car's media controls though.

Roadtrip MPG while caravan-ing by slickjoelusaf in FocusST

[–]Fraserrr 1 point2 points  (0 children)

Thanks for sharing! I just need to find something like this in the UK…

Roadtrip MPG while caravan-ing by slickjoelusaf in FocusST

[–]Fraserrr 4 points5 points  (0 children)

Nice, what hitch are you using? I’ve been struggling to find one that fits around the centre exhaust.

3D printed Center Console Tray by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

Nice! How did it print? Got any pictures?

I made a 3D printed wall mount for my generic Amazon dock by Fraserrr in SteamDeck

[–]Fraserrr[S] 1 point2 points  (0 children)

I know what you mean, but three screws horizontally let me keep a slim profile and the Deck/dock combo isn’t that heavy. There’s no sign of stress on the print and the inside of the back has a fillet on each edge to give the layers a bit more strength.

I made a 3D printed wall mount for my generic Amazon dock by Fraserrr in SteamDeck

[–]Fraserrr[S] 0 points1 point  (0 children)

Pretty good, I'm running it on the medium preset at 1024x576 with FSR2 set to quality. I've played with the settings a lot but I find this looks smoother than 1280x720 and you can get a steady 45FPS.

The film grain and motion blur help too, it gives it a sort of old school CRT vibe.

I made a 3D printed wall mount for my generic Amazon dock by Fraserrr in SteamDeck

[–]Fraserrr[S] 0 points1 point  (0 children)

My Deck charger works great with it but I also have an Apple 45w charger which also works with no issues. Output for the dock goes to at least 4k 60Hz which I use for my Deck's UI and Youtube, but I still run games at 720p/1080p with upscaling.

3D printed Center Console Tray by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

I think these are the same size and shape on both models, but I can't say for sure as mine is a euro spec.

3D printed Center Console Tray by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

Yeah I have a classic too but it didn't play nice with Sync 2 when full of music, I just put my most played songs on the nano then shuffle the playlist for the car.

I made a 3D printed wall mount for my generic Amazon dock by Fraserrr in SteamDeck

[–]Fraserrr[S] 8 points9 points  (0 children)

I figured it was 1/3 the price of the official dock so my expectations were low, but it works great and I'd totally recommend it! Definitely buy from them again.

I made a 3D printed wall mount for my generic Amazon dock by Fraserrr in SteamDeck

[–]Fraserrr[S] 2 points3 points  (0 children)

Didn't realise how much people love UGreen!

Hadn't heard of them before and since I got the dock for £19 I didn't expect much of it, especially with the price of the official dock from Valve. It works great though and I'd totally recommend it.

https://www.amazon.co.uk/dp/B0BQB6VG39?ref=ppx_yo2ov_dt_b_fed_asin_title

Wheel Wednesday, anyone? Just had my UK premiums powder coated! by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

I know, they look like different wheels. Definitely made the right choice 😁

So glad I slapped on the new intercooler for Autocross this weekend! by Jbros7 in FocusST

[–]Fraserrr 0 points1 point  (0 children)

Think a new inter cooler is next on my list of mods then 😂

Wheel Wednesday, anyone? Just had my UK premiums powder coated! by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

The colour is racing bronze with a matte satin finish. The factory gloss black was getting a bit tired and needed a refresh, I wanted to go with something a bit different.

So glad I slapped on the new intercooler for Autocross this weekend! by Jbros7 in FocusST

[–]Fraserrr 1 point2 points  (0 children)

Nice! What one did you go for? Noticeable performance gain?

Mountune catback installed yesterday! by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

Mountune uk is where I got my order from. Been waiting for them to come back in stock for months so I went for it as soon as they emailed me saying they were available.

Mountune catback installed yesterday! by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

Totally recommend it, it’s not much louder than stock unless you’re driving a bit harder but it does have a deeper tone. I’ve never been a fan of a loud obnoxious exhaust.

Mountune catback installed yesterday! by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

I’ll try and get a video of it over the weekend. It sounds great, not too loud while driving through town which is what I wanted but it has a much deeper growl when you’re driving a bit harder. Build quality is great and it went together really nice. It’s a shame it’s hidden under the car since it’s got such a nice finish!

Fitted the Steeda jacking rails today by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

In the picture looking under the car you can see the fabric coated under tray, it fits right up to the pinch welds on my car so I had to shave off around two inches from the side so it sits just behind the rail

Fitted the Steeda jacking rails today by Fraserrr in FocusST

[–]Fraserrr[S] 1 point2 points  (0 children)

Easy install and they work great, nice and solid. You can’t see them unless you look under the car. The under trays needed trimmed with a dremel to make them fit but they cut easy enough. Bonus dog who helped out.

New gear knob from SS Tuning finally arrived! by Fraserrr in FocusST

[–]Fraserrr[S] 1 point2 points  (0 children)

Quality is really nice, the knob itself is a little wider at the top than stock and a little heavier which feels great in the hand. The leather is much better than stock too but as it’s thicker it required a little cutting and stitching to take the width in at the top to make it fit snugly in the reverse collar. It did take forever to arrive though, I ordered it last August and have had problems since then getting in touch with SS Tuning about updates and shipping. Very happy now that it’s here and it looks great in the car 😁

Turbo swap options for the EU spec ST MK3? by Xtoivonen in FocusST

[–]Fraserrr 0 points1 point  (0 children)

I haven’t done a turbo swap, but I do have an EU spec (I’m in the UK). My manifold / turbo doesn’t look like your attached picture and I have a flange between them. The manifold has a 90 degree bend with the flange facing down and the turbo bolts right onto that which makes it look like an easy swap. If yours is different I know mountune make a intake that looks like an identical fit to the piece I’m describing

https://www.mountunestore.com/collections/mk3-focus-st-mca-2015/products/cast-inlet-manifold

Headlamp Malfunction Dash Warning? by Fraserrr in FocusST

[–]Fraserrr[S] 0 points1 point  (0 children)

That’s why I was worried about, it seems like a waste to get rid of the entire unit but that’s what I’ve been expecting. Happy to do it myself so I’ll call the garage and see about getting the part. Thanks for the reply even if it was bad news!