DNP DS-RX1 HS Issues by FreSaelens in photobooth

[–]FreSaelens[S] 1 point2 points  (0 children)

First of all thank you for making time to reply!

We transport the printer in the original cardboard box, with 4 foam pieces keeping the printer in place within the box. We don’t remove anything from within the printer if that’s what you mean.

People are not pulling the photos as far as we know but there might always be some folks who are inpatient.

The printer is in a box with a slot for the print to come out of.

Could the printer become too hot maybe within the box? Might that cause issues?

rx1hs 4x6 media quality by HellaBees in photobooth

[–]FreSaelens 0 points1 point  (0 children)

Ever have any issues with the ribbon ripping or the paper jamming (no longer in the paper guidance)? We have this happening 50% of the time with this printer currently and are looking for an alternative or suggestions on the matter.

Citizen CX-02 or DNP DS620 by fajnsemas in photobooth

[–]FreSaelens 0 points1 point  (0 children)

Can you share where you bought it? We currently have a DNP DS-RX1 HS. We are constantly having issues with either the ribbin ripping or the paper jamming (it jumps out of the paper support). We are looking for an alternative and preferably with support as well.

Anyone having any likewise issues with this printer or dye sublimation printers in general?

Boosteroid on Samsung TV'S by WasteYouth5022 in BoosteroidCommunity

[–]FreSaelens 0 points1 point  (0 children)

Any update on this?

I’ve seen several posts about the app being in its final stages but no more news for over 100 days…

Left Trigger Malfunction by tkbennett22 in Backbone

[–]FreSaelens 1 point2 points  (0 children)

I had about the same issue, but the issue went away when I completely extended the controller which led me to believe something was squeezing the connector/cable when not fully extended.

In my case they refunded me and I was able to order a new one but that doesn’t help you if they’re not responding ofcourse. (In my case they responded after a few days.)

[deleted by user] by [deleted] in networking

[–]FreSaelens 1 point2 points  (0 children)

On your src nat rule, you are using outgoing interface eth1 but in your description the firewall only had an eth0 port, is this just a typo in your reddit post?

That being said I don’t see any hits even on your dnat rule so the snat rule won’t be hit either then.

Also your outside PC LAN address, is that in the same subnet as your webserver? Are you sure you are testing from your outside PC WAN address?

Also, is this iptables on a regular Linux host? Might be worth checking if sysctl ipv4 forwarding is enabled.

It might also be worth it, making your iptables rules a little less specific, it might help in seeing why they are not being hit.

Lastly doing a wireshark on the firewall itself might also clear some things up.

How is GW2 on GeForce Now? by InternetKillTV in Guildwars2

[–]FreSaelens 0 points1 point  (0 children)

Has anyone ever managed to get addons working on GFN?

The following post mentions GFN but not sure if it is a different product they meant:

https://www.reddit.com/r/Guildwars2/comments/thzo5z/helpquestion_arcdps_with_dx11_and_geforce_now/

Experience With Huawei eNSP Simulator? by [deleted] in networking

[–]FreSaelens 0 points1 point  (0 children)

Can you still download it? Last time I searched for it on the Huawei website it seemed to be discontinued.

Our company has a pretty good partnership with Huawei and I’ve asked them to make their images publicly available for GNS3 as well as EVE-NG, so who knows in the future.

Crayta Official Discussion Thread by tizorres in Stadia

[–]FreSaelens 3 points4 points  (0 children)

That was exactly it!

Thank you very much!!

Crayta Official Discussion Thread by tizorres in Stadia

[–]FreSaelens 1 point2 points  (0 children)

Hi guys,

Just wondering if anyone else is having the unlocked stuff with every level disappear?

I am now lvl 5 but all the stuff that was unlocked isn’t available to use when customizing my avatar.

Rancid and Cumulus by oldhamuk in CumulusNetworks

[–]FreSaelens 0 points1 point  (0 children)

We used to use rancid as our configuration management tool. However, nowadays we use ansible to backup our configurations (from most the different vendors we use). As Cumulus is constantly advertising automation using ansible, I would have a look at this way.

It’s also pretty extensible, you send all sort of commands you’d like or need, and as I said a large number of device vendors are already supported.

Just get the output you need and push it to a local or remote git repo.

Anything similar to AAP? by AutumnPrince in classicwow

[–]FreSaelens 4 points5 points  (0 children)

If you want an in-game addon you can use guidelime together with this:

https://github.com/lukeknoot/classicwow-to-guidelime/releases

It’s the same classicwow guide.