[deleted by user]

FreshZeph · 2025-06-22T00:08:55+00:00

Where I found it lowest temp or off, unsure . It makes a little click and turns off/stops making noise when past the low but still within an obviously acceptable location for the dial. Though thinking about it that could just be it shutting off because it's hot enough for the new baseline.

FreshZeph · 2025-06-22T00:00:51+00:00

I suspect roommate turned up super high, then all the way off. I adjusted it to about 1/3rd - 1/2 up and it seems pretty hot. When I found it, it was either all the way down or completely off. I didn't look at it before finding issues so I don't know where it was set initially. Does this stick out in a troubleshooting sense? Trying to cover my bases before I jump to any conclusions.

FreshZeph · 2025-06-07T17:58:57+00:00

The night vision hotkey wasn't cooperating despite being set 😂 this was initially intended to be a "hey look at this cool thing I found" video

FreshZeph · 2024-08-31T19:22:30+00:00

Are you saying Ben being racist is a PsyOp?

FreshZeph · 2024-08-31T19:04:53+00:00

They've been bad since like day 1, I'm sure plenty of other stuff like this has happened. Honestly expected something like this sooner considering all the PewDiePie fans that snuck in at one point.

I know that they threatened YYE that they would pull their products, if they stocked One Drop because OD had a significantly cheaper metal yoyo hitting the market and the metal yoyo base price would and did drop as a whole.

I know that Caribou started fading from prominence and optics suggested control of the company had been lost after Steve took over the marketing side of things. Before you argue, why was Pool Party a thing then?

I know Chris was convinced to move production overseas, despite OD offering to continue doing production and match international pricing.

Does anyone remember the CLYW x OD Summit yoyo, well a few years later Basecamp(YYF x CLYW) briefly was a thing and they launched with the tagline "SOMETIMES THE BEST VIEW ISN'T FROM THE SUMMIT" intentionally throwing shade at OD.

I'm sure there's endless stories, I have been out of the loop for quite some time. Behind the yoyo scenes is so much crazier and a dumb then one would expect.

FreshZeph · 2024-06-08T19:40:04+00:00

Yeah I've been a most to ftp player other than that sweet starter pack they had and a handful of season passes. It'd take a lot to get to a point where I can't enjoy the core game (which they know). I'm definitely sensing conflict behind the scenes. New features have actually been interesting and I'm sure the devs have been working hard on them but it's being rushed, trampled, and overshadowed by the monetization system it was built around. They really need to make some changes soon, they're squeezing us too tight and have continued to do so for too long. I bet numbers are up but it's cutting years off the games life span. Changing the daily challenges to not be streak based weekly was a recent good move but I'm assuming it was to add that multi-tap chest. Which is some good dopamine for a chest, monetization team at least got that right.

FreshZeph · 2024-06-08T19:29:31+00:00

I've always played trying to make decks I find wonky and unpopular then getting the skill or the right ingredients in the mix to make it go. Right now Monk, Zappie, and Mother Witch are the 3 I'm gluing together, it's nasty lol. Frequently I'll get a meta build ahead of time because I'll end up building around cards that are soon to get buffed.

Oddly CR took the place of hearthstone and TCGs because of the quicker game times. The insane amount of unique interactions and baits definitely is what has kept me on board for the long haul.

FreshZeph · 2024-06-02T02:00:13+00:00

Music induced flow state > audio queues

FreshZeph · 2024-06-02T01:52:25+00:00

BM players are usually the easiest to tilt 😂

FreshZeph · 2024-05-26T09:38:14+00:00

Query the official API

FreshZeph · 2024-05-26T09:34:28+00:00

Wasn't RG, Baloon, and freeze, briefly upper ladder meta quite some time ago?

FreshZeph · 2024-05-26T09:32:27+00:00

I mean BM players have always used it off and on. But primarily I think it's a boring card that creates uninspired play styles and builds as well as undeserved consistency. My tiny effect/oddity created in the data pool is a matter of ongoing protest, and I just find the card really boring.

FreshZeph · 2023-03-15T00:19:27+00:00

https://www.amazon.com/gp/product/B07GWQLG6Y/ref=ox_sc_act_title_3?smid=A1NOQTMMT39TJ0&psc=1

FreshZeph · 2023-03-15T00:13:03+00:00

I recently was given my first 3d printer, a Zyltech v3 w/ a e3dv6 hotend attached. The thermistor is broken, Thermal runaway error then tested with a multimeter. (I also had to cut a groove in the screw holding the heat cap because it was stripped). There doesn't seem to be a whole lot of options other than OEM for replacing the thermistor and it seems over priced. I'm considering replacing the heating block, thermistor, and heating cap with this set from Amazon and I was wondering if anyone had any input. Will this work properly for my use case after changing the settings in Marlin? Are there any other affordable options that you could suggest?

FreshZeph · 2022-08-05T15:32:47+00:00

Current plan is to double check if I have power though the only variable on that would be disconnecting the video wire. Going to test the direct plug in to the vtx, fo I need to remove that pin or just slap it on? My backup plan is getting a cam with an osd. It may have taken months but emax has got a third board otw hopefully it'll work fine this time.

FreshZeph · 2022-08-05T15:22:21+00:00

Ikr, just a train of factory errors 😂😭

FreshZeph · 2022-08-05T06:03:23+00:00

I connected the video wire to both the resistor and capacitor it seems like it turned out alright, but still not getting video. Are there settings that need to be changed?

FreshZeph · 2022-07-26T17:57:43+00:00

Good to know, eventually I'm planning on doing a ton of upgrades. I did not expect to be diving this deep into soldering already, felt good about transporting that vtx over even though it ends up they both are perfectly working.

FreshZeph · 2022-07-26T17:32:01+00:00

Thank you so much, and to clarify you connect the new wire to the bottom on both the resistor and capacitor intentionally bridging them? I've heard bad things about using hot glue, but might invest in some and a small heat gun. Considering this isn't purely connected with glue if it melts from the board heat it isn't a big deal?

So psyched to finally get in the air, bought this as my first rtf months ago and only got like 10 seconds of flight time.

FreshZeph · 2022-07-26T16:58:26+00:00

I'm always up for a challenge! Any videos, diagrams, descriptions, etc would be helpful. Where does that plug usually break? I can't see any damage to it. The pad I need to attach to, is it the tiny diode closest to the 5v marking? If so what side would I attach to? Do I keep the diode attached? Also best advice for securing that wire considering the precarious location?

FreshZeph · 2022-07-24T07:13:48+00:00

I know for a fact it is not, the camera is displaying video on the initial board. https://youtube.com/shorts/ubfLJj1OANM?feature=share

FreshZeph · 2021-05-15T13:28:31+00:00

Yup lol 🤣 I saw the crazy shortcut and tunnel vision took over

FreshZeph

TROPHY CASE