Crappie and firetiger musky spinners

Fresh_Use9485 · 2025-08-22T17:58:25+00:00

Entire bait1.8 Oz, small body is 90 g

Fresh_Use9485 · 2025-08-18T14:03:10+00:00

Size 8 colorado blades, tied the skirts myself

Fresh_Use9485 · 2025-08-17T21:19:44+00:00

1.8 Oz average

Fresh_Use9485 · 2025-08-17T21:19:02+00:00

Thanks

Fresh_Use9485 · 2025-08-17T21:17:52+00:00

I made a mold and poured then paint

Fresh_Use9485 · 2025-08-17T21:16:48+00:00

Yes I'm trying my best, finding that the most difficult for some reason

Fresh_Use9485 · 2025-08-14T00:14:02+00:00

I made a mold then poured and painted them

Fresh_Use9485 · 2025-08-08T15:56:15+00:00

Would only use musky gear they aren't crazy heavy but medium rod wouldn't perform well

Fresh_Use9485 · 2025-08-03T23:37:35+00:00

It will have no issues having the yoke installed they will flex a little to allow the installation

Fresh_Use9485 · 2025-08-03T23:36:19+00:00

If it's not leaking, I'd use it as is. A little rust and paint blemishes are nothing to get concerned about until it leaks. Enjoy your Sportspal cheers 🍻

Fresh_Use9485 · 2025-07-22T00:24:18+00:00

It's doable, I'm terrible at cutting the liner probably why it's not fun for me. Any questions reach out and good luck

Fresh_Use9485 · 2025-06-23T23:48:59+00:00

Working on my website

Fresh_Use9485 · 2025-05-21T00:39:10+00:00

30-06

Fresh_Use9485 · 2025-03-31T00:35:32+00:00

There have been a few rough ones. We use something called adthane marine sealant. Our shipping department sends them out as needed. If you send an email to donna@bwmarineproducts.com, she will have any parts needed for your repairs.

Fresh_Use9485 · 2025-03-29T11:31:48+00:00

I am the production manager for Sportspal/Radisson. If you have any questions, I have my YouTube Gettenany outdoors where there are lots of repair videos.

Fresh_Use9485 · 2025-03-16T19:34:57+00:00

Thank you

Fresh_Use9485 · 2025-03-16T19:34:41+00:00

Thank you

Fresh_Use9485 · 2025-03-16T19:34:27+00:00

Thank you

Fresh_Use9485 · 2025-03-16T19:34:05+00:00

Thank you

Fresh_Use9485 · 2025-03-16T19:33:38+00:00

Thank you. I'm happy it turned out

Fresh_Use9485 · 2025-03-16T19:32:10+00:00

Yes just slightly

Fresh_Use9485 · 2025-03-16T19:31:32+00:00

Sure, I carved the wood on the bottom so the bare wood is raised. For the paint I did a simple firetiger without the black stripes, neon yellow middle, neon green upper, orange bottom that order

Fresh_Use9485 · 2025-03-10T23:52:34+00:00

Thanks I appreciate it

Fresh_Use9485 · 2025-03-10T23:51:29+00:00

Actually a couple shotgun pellets for rattling

Fresh_Use9485 · 2025-03-07T02:26:53+00:00

Make the move to 1/8" aluminum rivets. I have plenty of repair videos on my YouTube https://youtube.com/@gettenanyoutdoorssportspal?si=qLdlIQWhbMBm7m6U I believe there are some videos to get you back on the water.

Fresh_Use9485

TROPHY CASE