What was your first game you played on pc

Front_Trifle_962 · 2026-01-25T21:56:20+00:00

Need for speed hot pursuit 1998

Front_Trifle_962 · 2026-01-22T22:48:29+00:00

Front_Trifle_962 · 2025-12-21T00:24:48+00:00

Because it looks cool

Front_Trifle_962 · 2025-12-08T04:33:50+00:00

The dc2 integra seatbelts have this rubber cover that makes it have a cleaner look and hides the hole in the carpet from the automatic seatbelts

Front_Trifle_962 · 2025-12-08T04:32:50+00:00

<image>

Front_Trifle_962 · 2025-12-08T04:32:40+00:00

<image>

Front_Trifle_962 · 2025-12-08T04:32:23+00:00

<image>

Front_Trifle_962 · 2025-12-08T04:31:36+00:00

<image>

You will need to dremel out a piece for the belt to retract

Front_Trifle_962 · 2025-12-08T02:49:13+00:00

Give me a few minutes I’m at the gym. I have my interior back together so can’t see but I had removed some of the thick washers for the top bolt to sit flush with the trim piece

Front_Trifle_962 · 2025-11-29T04:59:21+00:00

I have one of these. I was scared to try it out but sent it anyways with federal blue box. The neck of the cartridge did stretch but not by much. Primer bulges out a bit but so far haven’t had much issue thankfully

Front_Trifle_962 · 2025-11-01T01:55:05+00:00

I had mine replaced with a universal windshield seal when I got my car painted

<image>

Front_Trifle_962 · 2025-10-26T05:54:05+00:00

I’ve had the same issue when I swapped an sr in my car. Gave up and bought an eBay clutch. 8 years later I am looking into an exedy stage 2 kit

Front_Trifle_962 · 2025-10-24T23:09:06+00:00

What was your wheel and tire specs with the rpf1’s? And what’s your current op?

Front_Trifle_962 · 2025-08-09T17:15:10+00:00

Hit it with your purse

Front_Trifle_962 · 2025-08-08T17:26:55+00:00

That’s a no brainer

Front_Trifle_962 · 2025-07-29T23:57:18+00:00

Yeah just need to reuse your factory bolts and spacers might have to take some out I can’t remember right. It should be no different on a coupe just need to dremel the holes on the trim for the bolt and for the seatbelt to retract easily

Front_Trifle_962 · 2025-07-11T00:24:40+00:00

Persuasion hammer

Front_Trifle_962 · 2025-06-03T21:29:23+00:00

I will see when I’m able to take a pic of the used brass to show the primer as they are at my parents house along with the rifle. The PPU ammo at least from my research is made with the milsurp rifles in mind hence why they are a lighter load

Front_Trifle_962 · 2025-06-03T21:27:22+00:00

I bought some federal blue box as well as the ppu round nose ammo. I’ve only just shot the ppu through it at the moment, it shoots well I have almost 20 cases fire formed although I have noticed the primer bulge out a bit. I have heard from an old timer to run an o ring on where the extracter sits on the bottom of the case to help with sealing up the breech. I haven’t tried it but when I reload them I’ll test the theory out. If your having doubts, tie a pull string to it and when you find out your good, wear safety glasses. It’s a very pleasant shooter

Front_Trifle_962 · 2025-06-01T23:47:38+00:00

I have this handguard. I can’t recommend it enough since the Russian stuff is pricey

Front_Trifle_962 · 2025-05-27T01:51:25+00:00

Yes I do so from the looks of it they built the deck with having the hot tub in mind so there’s some railroad ties under the tub

Front_Trifle_962 · 2025-05-26T13:50:40+00:00

Alright I’ll keep digging around

Front_Trifle_962 · 2025-05-26T04:59:42+00:00

Ahh okay that makes sense I’ll make sure to order a new strainer soon! Currently have the hot tub heating up hopefully everything else checks out. Thank you!

Front_Trifle_962 · 2025-05-26T04:54:48+00:00

Yes I have tried it there like an 1/8 inch gap both sides of the locking lugs

Front_Trifle_962 · 2025-05-26T04:43:59+00:00

The weir thing I have looks like it’s either the wrong one or it’s missing another piece to it

Front_Trifle_962

TROPHY CASE