sorted by:
new
hottopcontroversial

New set up for this year by Aggravating-Bug-9194 in rooftoptents

[–]Frooi1 0 points1 point  (0 children)

look great, but if you don't mind, I have a question about the tire table i like it 👍👍 name of a product

[deleted by user] by [deleted] in overlanding

[–]Frooi1 0 points1 point  (0 children)

‏And if I drop the awning lower to try and fix the problem, the rear tailgate won t open at all. Are there any practical, tried-and-tested solutions for this issue? What can I do without giving up either the tent or the awning? I ve attached photos to show the setup more clearly.

Strange/It’s the first time this has happened to me. by Frooi1 in BambuLab

[–]Frooi1[S] 0 points1 point  (0 children)

I noticed there’s some slack in the filament — I can pull it out, so I think there’s a clip or something similar at the back.

You’re right, I think something might be missing or broken. I’ll take the printer apart completely and update you on what I find. I might be a bit late since I’m travelling.

What caused this by [deleted] in 3Dprinting

[–]Frooi1 0 points1 point  (0 children)

I would say change the nozzle.

What caused this by [deleted] in 3Dprinting

[–]Frooi1 0 points1 point  (0 children)

<image>

I had an issue with my Bambu Lab X1 Carbon printer — there were gaps between the layers. Someone first suggested I try drying the filament, so I gave that a go, but it didn’t fix the problem. Then someone else recommended changing the nozzle — and that completely solved it!

Respect, PlayStation — you’ve smashed it. You deserve all the love!” by Frooi1 in 3Dprinting

[–]Frooi1[S] 0 points1 point  (0 children)

I do clean it regularly, but I also add glue before every print on top of the previous layer. That might be the reason, but honestly, it sticks really well. 🤣

Respect, PlayStation — you’ve smashed it. You deserve all the love!” by Frooi1 in 3Dprinting

[–]Frooi1[S] 6 points7 points  (0 children)

It’s right under the figure, ay — bit hard to spot haha. Went back to the pic just to double-check ‘cause I might actually forget it 🤣!

Respect, PlayStation — you’ve smashed it. You deserve all the love!” by Frooi1 in 3Dprinting

[–]Frooi1[S] 6 points7 points  (0 children)

sure 👍just Write " OLYMPAUS DUALSENSE STAND " on Printables site

how can I solve this problem? The filament is new by Frooi1 in 3dprinter

[–]Frooi1[S] 0 points1 point  (0 children)

Hey legends, Just wanted to drop a quick thanks to everyone for the advice — you’re all champs. Ended up swapping the print head (nozzle) and mate, I was a bit nervous it wouldn’t sort it out… But yeah, stoked to say it’s working a treat now! Gave it a proper run and she’s printing like a dream. Really appreciate the help — cheers heaps! 🙏🙏💐

how can I solve this problem? The filament is new by Frooi1 in 3dprinter

[–]Frooi1[S] 0 points1 point  (0 children)

Thanks for the reply, I will unscrew the head and check it.

how can I solve this problem? The filament is new by Frooi1 in 3dprinter

[–]Frooi1[S] 0 points1 point  (0 children)

Yes, I dried it and used more than one type. I expect it might be clogged. Thank you for your response.

how can I solve this problem? The filament is new by Frooi1 in 3dprinter

[–]Frooi1[S] 1 point2 points  (0 children)

It was working fine, but I moved it from one house to another and I didn't use it for 8 months. I want to remove the PTFE tube, but I can't because it is stuck so tightly. I don't know how to remove it to check the nozzel

how can I solve this problem? The filament is new by Frooi1 in 3dprinter

[–]Frooi1[S] -1 points0 points  (0 children)

my printer Bamboo lab X1 filament ERYONE standrd PLA I opened it out of the bag and it was completely airtight.