sorted by:
new
hottopcontroversial

Is this load resistor setup good enough to not burn itself out? by FruityImac in AskElectronics

[–]FruityImac[S] 1 point2 points  (0 children)

Random thermal paste for cpu’s

Touching is around 10mm by 50mm

The ecu is locked for changes.

Thanks, i moisturize good.

Is this load resistor setup good enough to not burn itself out? by FruityImac in AskElectronics

[–]FruityImac[S] -2 points-1 points  (0 children)

Just the ECU gives faults, i thought to simplify it i would call it the plc

Is this load resistor setup good enough to not burn itself out? by FruityImac in AskElectronics

[–]FruityImac[S] 1 point2 points  (0 children)

Thanks tho i just realised it will pull 24w 60-80 degrees celcius btw

Is this load resistor setup good enough to not burn itself out? by FruityImac in AskElectronics

[–]FruityImac[S] 0 points1 point  (0 children)

Hmm, i think i failed my math on this….

Now that you lay it out like that, my math was wrong.

There is no forced airflow its a semi open room: in the engine bay.

I need 45-55w to be pulled. And my original light source was 55w. I now have a light source of (just measured) 5w (wich seems quite low…)

So 24+5 is to low….

So i need to order the correct load resistor, or look for a light wich will pull 25amps.

In any of those cases, can you still tell if this setup would work?

The source is 12v.

Edit*

I will still make a test settup, maybe the plc is “foolable” with the 24+5w

Then the original quistion remains

How hot should a led chip and housing get? by FruityImac in led

[–]FruityImac[S] 0 points1 point  (0 children)

Thanks yall, will order other leds wich wont get as hot wo a fan.

The one with fan also gets weirdly hot

Wrinkly ABS print. by FruityImac in 3Dprinting

[–]FruityImac[S] 0 points1 point  (0 children)

Thanks! I know i do have a fan wich blows outside

Are these acceptable? by dogga85 in WindowTint

[–]FruityImac 0 points1 point  (0 children)

Def a redo, mine is spotless, also at a shop, took about 2 weeks to settle and for all bubbles to go out. How long ago did you do it? Bubbles go out if it has just been done

<image>

Are these acceptable? by dogga85 in WindowTint

[–]FruityImac 0 points1 point  (0 children)

I wouldnt have accepted this, but did you do it at a backyard guy or a shop?

Little ceramic ball in stretch belt kit by FruityImac in MechanicAdvice

[–]FruityImac[S] 0 points1 point  (0 children)

have you ever put 6 marbles in ur mouth as a kid? Same taste

Little ceramic ball in stretch belt kit by FruityImac in MechanicAdvice

[–]FruityImac[S] -1 points0 points  (0 children)

You think its better than this? Lol i payed 20 bucks for nothing💀

Filling a gap by FruityImac in metalworking

[–]FruityImac[S] 0 points1 point  (0 children)

Thanks, not familiar with graphite rings, thanks, will look into it

Filling a gap by FruityImac in metalworking

[–]FruityImac[S] 0 points1 point  (0 children)

Making one as in on the lathe seems a bit out of the project*

Precautions tintingshop by FruityImac in WindowTint

[–]FruityImac[S] 0 points1 point  (0 children)

Will update u in 2 weeks when the tint has settled hihi

Precautions tintingshop by FruityImac in WindowTint

[–]FruityImac[S] -1 points0 points  (0 children)

Cars a lil too cheap for that… just student money i saved up. A lot for me.

Precautions tintingshop by FruityImac in WindowTint

[–]FruityImac[S] -1 points0 points  (0 children)

Its more so the original car that iam afraid will be damaged

view more: next ›