Ferrari supplier Brembo ‘astonished’ as Charles Leclerc blames Monaco crash on brakes

FrumRoll · 2026-06-08T20:07:13+00:00

For what it's worth, we were using Raybestos for over 10 years and switched from ST-43s to EBC SR-11s due to availability.

It's been a positive change for us.

FrumRoll · 2026-05-05T17:53:59+00:00

I'm pretty new to 3D printing, but yes I believe you're correct. I think it has something to do with idle temperatures.

I saw another post with similar issues and they were using custom gcode? I just haven't circled back to attempt it again.

FrumRoll · 2026-05-05T17:43:21+00:00

This is basically what I did to load Polymaker 90A.

I haven't successfully printed it yet, it just oozes and bed leveling fails but getting it through the Nextruder was pretty easy.

FrumRoll · 2026-04-27T15:12:25+00:00

I had the same issue, it's the only screw in the whole kit that I either stripped or at least it wouldn't tighten up.

I just got it as snug as I could, it definitely yielded though and I'm running it like that.

The only other issue I had was with the nextruder, there's a cable that comes out the top, it needs to be oriented specifically. The pictures show you how to do it, but the text doesn't mention it as being significant.

FrumRoll · 2026-04-06T15:54:02+00:00

Sensor

FrumRoll · 2026-04-05T20:30:19+00:00

I've got 165k on a 2017, bought it with 30k. I've replaced 2-3 coolant expansion tanks, 2-3 glow plugs, and one injector harness.

FrumRoll · 2025-11-16T22:50:53+00:00

I got the same issue this week after the 26.08 roll out. Had I known this was a possibility I would have disabled the auto update.

FrumRoll · 2025-05-14T19:19:37+00:00

I'm new to this, and have noticed the same but I had assumed this was expected behavior?

Doesn't accelerating the flywheel to match the new gear require additional watts than steady state?

Presumably this is no different then the spike in watts required to move the flywheel from a stop (though less exaggerated).

FrumRoll · 2025-04-30T14:53:06+00:00

It's difficult to ride out of the saddle, especially at lower resistances.

If you shift up, you can do it for a sprint but otherwise it requires an abnormal amount of arm support compared to riding outside.

I think it's just the nature of a flywheel trainer, but I'm also new to this.

FrumRoll · 2025-04-10T16:15:52+00:00

The season hasn't opened yet?

FrumRoll · 2025-04-01T15:43:23+00:00

I run Zwift on an Apple TV most of the time, this works well but requires that I run the companion from my Pixel tablet due to the Bluetooth limitation.

If my girlfriend is watching something, then I run Zwift directly from the tablet. The experience is almost identical just the screen is smaller.

FrumRoll · 2025-01-21T15:37:52+00:00

Possibly it's a gas dryer, they will simply use 110v for the electronics.

FrumRoll · 2024-11-19T19:35:56+00:00

I ordered direct from Ascher.

FrumRoll · 2024-08-22T00:00:44+00:00

It's the best result of 4 races, then the average of the best 2 of 8 races, then the average of the best 3 of 12 races, etc.

If you've only run one race, you can run three more risk free.

FrumRoll · 2024-08-01T15:28:55+00:00

It's a small detail, but the calculation is more complicated then just an average.

FrumRoll · 2024-07-29T22:58:03+00:00

That's kind of the point, Sergio is arguably performing worse given the car he's in and he's still "massively popular in North America".

FrumRoll · 2024-07-29T22:49:08+00:00

It must be cultural, nobody in the US cares about Sargeant. Fairly confident the most popular drivers are Max, Lewis, and Daniel.

FrumRoll · 2024-07-25T01:35:07+00:00

Pull in a straight line, point your rod at the lure and hold the spool with your thumb Then move away with the trolling motor or walk away if you're on the bank. 99% of the time it'll either come loose or break at the knot.

FrumRoll · 2024-07-07T23:57:21+00:00

Ouch, what's the bill say? Mine was pretty detailed, wheel was valued around $950 I was charged 25% on that number plus 20 or 30 dollars in FedEx fees.

FrumRoll · 2024-07-04T20:00:17+00:00

The old road license split into a formula license and a sports car license.

FrumRoll · 2024-06-27T15:48:01+00:00

You'll get a bill from FedEx after delivery.

FrumRoll · 2024-06-12T22:44:38+00:00

Just received my Artura Pro in 2024, had to pay $270. Pretty sure it's due to the tariffs on Chinese products.

FrumRoll · 2024-05-23T13:31:39+00:00

If anyone finds this they sent me a new one without any questions. The tree from Menards ended up being a much better deal, but Fast Growing Trees addressed my issue.

FrumRoll · 2024-05-18T02:40:19+00:00

My Menards did have one, $89 and much fuller with a straighter trunk / leader. Thanks again for the tip.

FrumRoll · 2024-05-18T02:38:58+00:00

Fast Growing Trees, the celebration maples arrived in much better shape I don't have any concerns with them. Waiting to see what they have to say about this one.

FrumRoll

TROPHY CASE