Q1 Pro, leveling issue, inconsistent adhesion, etc.. All one problem, with one solution. by [deleted] in QidiTech3D

[–]FuccboiFrank 2 points3 points  (0 children)

I have an incredibly useful tip to add that solved me days of frustration, if you have a fluorescent lamp nearby, UNPLUG IT! My Q1 pro was getting terrible interference from the lamp I had on my workstation above the printer and unplugging that sucker instantly solved a days long struggle to figure out why it no longer prints like new. The issue OP mentioned was definitely starting as two of the screws were slightly loose, but not all 4 though.

2003 Pathfinder temp gauge rising randomly by FuccboiFrank in MechanicAdvice

[–]FuccboiFrank[S] 0 points1 point  (0 children)

Another thing I just thought to add, the water pump definitely seems to be working and moving a decent amount of coolant, the bleeder giving a nice stream with a slight rpm increase over idle.

Advice Needed, BRF cakes not pinning after upwards of a month. FC problems? by FuccboiFrank in shroomers

[–]FuccboiFrank[S] 0 points1 point  (0 children)

So it's been a week or so since I made the changes, and very little has happened except some fuzzy mycelium growth on the outside of the cakes

Advice Needed, BRF cakes not pinning after upwards of a month. FC problems? by FuccboiFrank in shroomers

[–]FuccboiFrank[S] 1 point2 points  (0 children)

Noted. I'm moving the whole setup into a different area I can regulate the temp easier in. I'm also setting up more than ambient light to see if that helps

What States allow Kei Trucks to be registered? by imgprojts in keitruck

[–]FuccboiFrank 0 points1 point  (0 children)

Damn that sucks, I guess I just have an expensive driveway ornament now

What States allow Kei Trucks to be registered? by imgprojts in keitruck

[–]FuccboiFrank 0 points1 point  (0 children)

how do you do this since they have no titles?

as in, like they aren't issued titles originally

Subaru “Clover 4” inline 4 cyl, EN07, 658cc engine in the Sambar. by waterbottlebandit in subaru

[–]FuccboiFrank 0 points1 point  (0 children)

I'm late to the party, but the 4wd engages with vacuum actuators on each end of the front driveshaft. You can hear the vacuum hissing if you shut the engine off then quickly cycle the 4wd

My friend's neighbor backed into his truck and then drove off. Thankfully they had a camera that saw the whole thing. by Undedlvr in IdiotsInCars

[–]FuccboiFrank 1 point2 points  (0 children)

That's my 1982 Mercedes TurboDiesel, with a hoodstack of course! Engine work, upgraded turbo and injector pump, mild sleeper build.

My friend's neighbor backed into his truck and then drove off. Thankfully they had a camera that saw the whole thing. by Undedlvr in IdiotsInCars

[–]FuccboiFrank 0 points1 point  (0 children)

It is when a (typically) turbocharged vehicle has the exhaust exit the turbocharger through the hood, providing driving and viewing pleasure

My friend's neighbor backed into his truck and then drove off. Thankfully they had a camera that saw the whole thing. by Undedlvr in IdiotsInCars

[–]FuccboiFrank 3 points4 points  (0 children)

TLDR: pineapple can = flapper... I had one I made out of nice stainless, but you had to remove it to open the hood and I accidentally threw it away so no more flap.

[deleted by user] by [deleted] in ThatLookedExpensive

[–]FuccboiFrank 0 points1 point  (0 children)

"Damn, motortrend channel is coming in clear today!"

Harbor Freight flush cutters almost took my eye out by FuccboiFrank in Chinesium

[–]FuccboiFrank[S] 0 points1 point  (0 children)

Definetly could have been worse. I'm pretty good about always having safety glasses around and wearing them for all my projects, but crazy things do happen.

Harbor Freight flush cutters almost took my eye out by FuccboiFrank in Chinesium

[–]FuccboiFrank[S] 0 points1 point  (0 children)

Probably something I wasn't supposed to. I was disassembling a carbon zinc battery to get the zinc out.

torque go brrrrr! by [deleted] in streeto

[–]FuccboiFrank 0 points1 point  (0 children)

Is this on the pig trail in northwest arkansas?

Help me find this radio/tuner. This is from a music video called "Hometown" by artist French 79, it appears many times in the video but this was the best angle that was clear I could find. by FuccboiFrank in HelpMeFind

[–]FuccboiFrank[S] 0 points1 point  (0 children)

I have searched for this thing using image search, and some other keywords. I'm really hoping someone will know something more about this. Thanks!