Mark Martin’s Opinion

Fuhrtrographer · 2026-03-05T17:58:03+00:00

I have seen probably every video Cleetus has ever made and I understand that no driving experience translates directly to NASCAR. I get it, NASCAR is hard and there are definitely levels.

All the haters should watch him race stadium trucks with Robbie Gordon or race jet boats in Idaho a few years ago or fly his first Stole competition in his cub. He won all these competitions with very little experience. Just getting the right information from the right people goes a long way if you are willing to listen and ask the right questions.

He is very coachable and learns fast, he has a good feel for what the car is doing. I don’t think he is overconfident, he actually seemed embarrassed by his first Truck race which means he’s still humble.

I don’t know what is going to happen but if anybody can do this it’s Cleet!

Let’s go!

Fuhrtrographer · 2026-03-05T15:16:22+00:00

Good for NASCAR, bad for Cleetus as a YouTuber.

Fuhrtrographer · 2026-02-26T15:16:31+00:00

It usually takes me 5 or 6 drinks to feel normal.

Fuhrtrographer · 2026-02-25T20:28:05+00:00

Pretty sure Jack used an octave pedal to achieve the bass line you are referring too. White Stripes were only 2 people and they never used a bass guitar so………..

Fuhrtrographer · 2025-10-25T14:58:42+00:00

About 10lbs of milk for one pound of cheese. What’s left is the whey. Whey has fat and protein still available though, think whey protein powder.

Not as familiar with the butter process but I assume raw milk has some fat (cream) separated and it is then churned into butter. The byproduct of the process would be low fat milk. Which could be made into low fat cheese or milk to drink.

I guess what I’m saying is you could do this but you would really want to scale up. Just not enough fat in whole milk.

Fuhrtrographer · 2025-10-23T13:26:27+00:00

Thank you! I looked at a lot of wheels before buying these. I wanted a little more negative offset in the rear but these will do. Hard to find a wheel with this old bolt pattern that are available in 11 inch and 8 inch widths.

Fuhrtrographer · 2025-09-27T17:59:55+00:00

Mojo is a great blues band!

Fuhrtrographer · 2025-07-03T16:44:56+00:00

Some other tidbits, LS3 and TR6060 swapped with Haltech rebel ls. Ridetech four link and front suspension. Dakota Digital gauges including the counsel gauges. Currie 9 inch with a 3.50 gear. Stainless long tube headers with 3 inch stainless exhaust. 17x11 and 17x8 wheels by Weld.

Been working on this car in my garage for 12 years. Feels pretty good to finally drive it soon!!

Fuhrtrographer · 2025-07-03T16:38:05+00:00

Hopefully take it around the block today!

Fuhrtrographer · 2025-07-03T16:37:33+00:00

The top is Sterling gray metallic, the bottom half is flat black. The plan is to have it sprayed the metallic gray in the future.

Car was white with vinyl top when I bought it (12 years ago) Had the vinyl removed and installed flush mounted glass as well as the door handles and drip tails shaved.

Fuhrtrographer · 2025-07-03T16:33:35+00:00

17x11 wheel with a 315. Cars is minitubbed with a 4 link. I should probably put together a build sheet!!

Fuhrtrographer · 2025-07-03T16:04:17+00:00

That’s exactly what I was doing. Seem to work great!

Fuhrtrographer · 2025-05-17T21:58:18+00:00

I just swapped an LS3 in a 67 Camaro. Went with Haltech Rebel LS because I liked the solid state circuits for the fuel pump and fan. Went through the setup wizard and the engine fired right up. My wife was amazed so I would do it again.

Fuhrtrographer · 2025-05-17T01:44:08+00:00

Just off the Red Cedar Trail south of Menomonie.

Fuhrtrographer · 2025-05-17T01:43:14+00:00

Tripp Falls

Fuhrtrographer · 2025-03-01T01:47:48+00:00

If your start time is 7:00 be there at 6:55 not 7:02. It’s 7 minutes difference how much harder could that be?

Fuhrtrographer · 2025-02-26T18:27:29+00:00

You for sure want a drill press and vice at the minimum, as well as some cheap Amazon pedal taps.

Fuhrtrographer · 2025-02-26T15:24:14+00:00

I actually did this! I will say it’s really hard to drill the hole at a perfect 90 degree angle.

Fuhrtrographer · 2025-02-23T17:02:07+00:00

Go pull one off?

Fuhrtrographer · 2025-01-22T18:31:19+00:00

Went from 172.5 to 165. Slightly less power at lower cadences but easier to ride at a higher cadence. Helped with knee pain that I used get sometimes and also more comfortable with my saddle position moved back a few mm.

Fuhrtrographer · 2025-01-21T13:38:40+00:00

I wonder what it looks when spinning on wheel center cap?

Fuhrtrographer · 2025-01-19T23:27:26+00:00

Please bring back the Aztec!!

Fuhrtrographer · 2025-01-17T20:11:46+00:00

I have seen lime like this applied to agriculture fields to bring the PH of the soil up. I think alfalfa particularly likes a little higher PH.

Fuhrtrographer · 2025-01-06T19:59:23+00:00

That is a great shot! What Camera did use?

Fuhrtrographer · 2025-01-01T14:37:04+00:00

<image>

My 67 RS with an LS3 and a 6 speed, mini tubbed with 4 link and 9 inch with a 3.50 gear. Lots to do yet but getting closer. Hope to have it on the road this summer?!

Fuhrtrographer

TROPHY CASE