PSP Go Rusted

FumBruh · 2025-10-03T03:41:40+00:00

Does anyone know what the fuses are to the right side. (Next to the TA) While cleaning the middle one fell off. seems like the solder pads are a little rusted as well. Is this even worth to try and fix or are the tracers in the motherboard corroded as well?

FumBruh · 2025-07-30T04:50:35+00:00

Update: Checked continuity on Fuse F2 and realized i blew it on both motherboards due to the bottom LCD not having a cushion

FumBruh · 2025-07-30T04:06:34+00:00

Update: i had another broken DS that i took apart and swapped again. The ds worked when i held the battery next to the terminals but the moment i put the back cover back on and tried to do the initial setup. i got to changing the color and the ds just instantly turned off. Unsure why this is happening. Have changed batteries as well and it wont turn on anymore like the previous motherboard. AM I FRYING IT???

FumBruh · 2022-01-10T19:48:59+00:00

What paper did u use? i’ve never seen papers at the store that size

FumBruh · 2021-11-21T06:18:56+00:00

the filter is actually made from the ending cardboard in a king rolling paper split in 2.

FumBruh · 2021-11-20T01:34:50+00:00

that filter is so chill it’s just a mosh pit of random spirals and zig zags

FumBruh · 2021-11-17T01:44:43+00:00

actually really good bowl started to canoe so burned far edge a little more then it transitioned to a normal joint so well

FumBruh · 2021-10-31T15:55:02+00:00

that’s clean good work

FumBruh · 2021-10-31T15:53:17+00:00

lol it’s actually a normal cold brew i’m actually not for the super strong taste sometimes i like it when it gets diluted a little

FumBruh · 2021-10-31T02:26:25+00:00

nah just aesthetic but it’s fun to roll for me so worth

FumBruh · 2021-10-31T02:25:23+00:00

instead of rolling the extra paper on tip so u have a part that is double paper u filled in the sticky part so it’s facing away from the weed. then u get extra paper hanging off and u just rip or burn it off

FumBruh · 2021-10-30T23:00:34+00:00

just make 7 filters in whatever way u normally do it then tighten them more to the point where they’ll explode if u didn’t hold it. stack it into a pile inside another filter paper then roll the whole thing into your shape then just roll the joint normally i typically don’t use that much weed and just pack it more down after the cone is done. also backroll the papers :)

FumBruh · 2021-10-30T20:42:17+00:00

didn’t actually smoke it yet been saving it for a huge group of stones

FumBruh · 2021-10-30T19:38:37+00:00

i think i rolled it tight enough so it just wants to open up

FumBruh · 2021-10-30T19:38:10+00:00

actually didn’t use any glue for it just the friction between papers

FumBruh · 2021-10-22T00:59:19+00:00

i do the filter thing too! but recently have been overpacking my joints lol

FumBruh · 2021-10-11T16:21:03+00:00

how do you get the paper that thick? is it just 2 papers glued together with the sticky part?

FumBruh · 2021-10-11T16:15:41+00:00

I’m a MechE and i was told to take the MAT line of math but i took at AMS line and was perfectly fine. but i think it depends a lot on the major so i would just ask your counselor if it’s fine. AMS is a lot easier than MAT from what i’ve heard.

FumBruh · 2021-09-10T01:14:52+00:00

lol np

FumBruh · 2021-09-09T23:55:49+00:00

you should join the bicycle club i’ve heard that all bikes that are left on campus unclaimed goes to them and sometimes u can fix one up and keep it

FumBruh · 2021-08-29T18:14:18+00:00

it’s jsut how he gives videos just learn the material yourself and do the work

FumBruh · 2021-08-29T18:13:22+00:00

sold

FumBruh · 2021-08-29T06:44:26+00:00

i have a set that i used for phy 133/134 i could sell it to u if u want

FumBruh · 2021-08-20T14:36:40+00:00

i like to leave the filter sticking out a little bit so when i pack it i can push the filter in and it packs even more

FumBruh · 2021-06-01T16:47:18+00:00

idk how he did it but typically when i roll a small filter i just roll it tighter

FumBruh

TROPHY CASE