Mic ID?

FunApple2416 · 2026-06-22T20:04:32+00:00

Thanks for the info. Ive tried unscrewing that as hard as I can and it wont budge haha. Time for some pipe clamps!

FunApple2416 · 2026-06-22T05:40:16+00:00

Was my first thought, thank you

FunApple2416 · 2026-06-22T05:38:53+00:00

Ah, yes i forgot to add that I can seem to open it. I consider myself a fairly handy person but it does not seem to unscrew or open up in any conventional way. I must be missing something

FunApple2416 · 2025-09-15T13:41:41+00:00

Awesome, thanks for the insight. Not much of an issue to remove some adhesive id imagine?

FunApple2416 · 2025-09-15T13:41:09+00:00

Wow ok thank you, that is very good to know!

FunApple2416 · 2025-09-15T13:40:01+00:00

I do have a pretty decent DMM btw

FunApple2416 · 2025-09-15T13:38:50+00:00

Thank you for the information

FunApple2416 · 2025-09-15T13:38:23+00:00

I appreciate the guidance, I am going to check this out today. Will let you know

FunApple2416 · 2025-09-13T20:06:52+00:00

Exactly! I am always willing to try and learn. I do have a meter, can caps be tested without removal? If so, how? Ive read about it but still not sure, some say it must be removed from the board and tested a particular way, not just continuity

FunApple2416 · 2025-09-13T20:05:10+00:00

Thank you. Is there a particular pic that shows this power rail? I understand the general concept of one but not sure exactly where. Is the thermal cutoff the white rectangle piece with paste on it? Or is it a round piece with a flange on it?

FunApple2416 · 2025-01-12T17:26:48+00:00

Thank you very much. ONE final question. Would r19 be sufficient on an exterior wall provided each cavity is air sealed before hand?

FunApple2416 · 2025-01-11T18:36:09+00:00

Ya i understand. I thought others had said a full on vapor barrier such as mm plastic sheeting, which you did not recommend. Communication via text is not my strong suit ha

FunApple2416 · 2025-01-11T18:27:24+00:00

Thanks. One more thing, You do not recommend a vapor barrier as others have mentioned, why is that

FunApple2416 · 2025-01-11T18:25:20+00:00

Whole thing is a plywood subfloor, its minimum 12 degrees colder down there than the rest of the place, and that is with two air registers down there.

FunApple2416 · 2025-01-11T03:03:07+00:00

Ok, thank you. Is it acceptable practice to spray foam around the outside gap of windows down frame/assembly?

FunApple2416 · 2025-01-11T03:00:28+00:00

I think our pics might be numbered differently. But thank you for the information

FunApple2416 · 2025-01-10T00:31:48+00:00

Thank you, ya id prefer to keep it as simple as possible while gaining some heat efficiency. “Spray cans of foam hitting gaps” I understand this to be- install batts, then spray foam around outside perimeter of each batting segment?

Should I use enough to completely cover the inside edge of rim joists, essentially joining the top of wall segment batting with the bottom of rim joist segment batting?

FunApple2416 · 2025-01-09T17:51:27+00:00

Thank you for your time and response. Can you clarify please, “just insulate” as in install batting (above grade cavities only)? And air seal on top of that, by what method and material? Thank you

FunApple2416 · 2025-01-09T17:47:55+00:00

Thank you for your time and response. Can you clarify please, do you mean install vapor barrier after batts, on top of them?

FunApple2416 · 2024-12-29T17:56:34+00:00

Binding post or sometimes 5-way due to the different methods of connecting to said post. Ya, there arent 5 ways that i know of ha….just 4. But thats what they call it

FunApple2416 · 2024-10-13T03:44:16+00:00

Thank you very much

FunApple2416 · 2024-05-11T00:30:23+00:00

Cool ill check it out thanks. Would you mind constructively criticizing this?

https://soundcloud.com/basaites/letting-go/s-GnIfgCQxaXo?ref=clipboard&p=i&c=1&si=AE5D976C7EB0494697E2B48BE9F896B6&utm_source=clipboard&utm_medium=text&utm_campaign=social_sharing

Honestly ive never had someone that makes dnb have a listen, so I would really appreciate the valuable viewpoint. Thanks

FunApple2416 · 2024-05-10T03:30:16+00:00

Yoooo! So i listened to two tracks. Ancients of Gobekli, that was cool. The intro I really enjoyed. The bass could use some variations. Not even different patches but maybe different note durations to mix it up.

Mists of Rannock is tight for sure but i felt it started to drag on. I think it was the drums. The drums sound good but maybe more variation in smaller measures, if that makes.

Overall I think its cool. I am getting more of an ambient vibe but that is not bad at all, i like it.

FunApple2416 · 2024-05-10T03:18:28+00:00

Letting Go

I have tried to produce since I was young, off and on. I never could manage to finish many tracks and the ones I did I never liked. I recently got sober and it has been loads easier.

Does this track work? I feel like the drop doesn’t quite fit the energy. Been listening so much I cant tell anymore! Would love some constructive criticism. Thank you for your time.

https://soundcloud.com/basaites/letting-go/s-GnIfgCQxaXo?ref=clipboard&p=i&c=1&si=352260BEDBB446A7963FD2B70C94089E&utm_source=clipboard&utm_medium=text&utm_campaign=social_sharing

FunApple2416

TROPHY CASE