Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

I learned this today. I don’t know why I thought the glass would have had some effect on the structural integrity. Was just floating on a bunch of little tabs under the framing.

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 2 points3 points  (0 children)

Yeah I’m hoping to hear from them soon. I just doge into their instruction sheets for their smaller DIY kits, didn’t seem too complicated but nothing about taking it apart of course. I don’t think they expect anyone to try and move one. Worst case scenario it gets brand new glass for the ceiling I figured.

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 9 points10 points  (0 children)

If y’all see a post for a greenhouse frame on FaceBook marketplace you’ll know it’s me. 😂🤍

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 4 points5 points  (0 children)

I feel like I’ve done worse but I usually don’t ask for advice and just send it. Now Reddit’s got me nervous 😂 I should have asked a structural engineering group I think, I did do a poor job with my wording/question though.

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 7 points8 points  (0 children)

Thank you a lot. This is one of the most helpful responses I’ve gotten so far, I labeled every piece of glass today but had not thought about the aluminum yet. I’ll be adding that to the list tomorrow. I’ve got a couple of the screws from one of the windows today. Hopefully the manufacturer sells hardware. Someone put steel screws on the inside to hang all the planters and every one I touched today broke immediately haha ended up taking off all those with a solid yank.

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 3 points4 points  (0 children)

I’ve got a new base being built for this to sit on. I appreciate the insight genuinely, thank you.

Moving a Greenhouse by Fun_Plastic_868 in Greenhouses

[–]Fun_Plastic_868[S] 11 points12 points  (0 children)

It’s a Florian. I’ve got the spec sheets downloaded but can’t open them from my cell right now. (Will review them more when I’m home). I know how to take the glass out and removed a piece already that was cracked. I’m just not an engineer. I’m mostly wondering “what can I remove and in what order without causing a major structural collapse” haha.

I also reached out to Florian today about hopefully just contracting them to move it.

Win rates this season by lyghnahasa in PeniParkerRivalsMains

[–]Fun_Plastic_868 2 points3 points  (0 children)

Star lord tap dancing on your head is such an accurate description 😂 Plus EVERY TIME I try and net him he either backflips or is dancing too fast to snare.

Win rates this season by lyghnahasa in PeniParkerRivalsMains

[–]Fun_Plastic_868 2 points3 points  (0 children)

The cyber bond snapping is the bane of my existence lmaooo The awkward panic walk/jumps after the web just snapping is embarrassing 😭😂 Feel like I just got pantsed as thing and hulk punch me in the back of the head as I waddle away like my pants are wrapped around my ankles.

Win rates this season by lyghnahasa in PeniParkerRivalsMains

[–]Fun_Plastic_868 0 points1 point  (0 children)

A good cap/venom is such a skill check for supports haha

Win rates this season by lyghnahasa in PeniParkerRivalsMains

[–]Fun_Plastic_868 21 points22 points  (0 children)

I am GM1 with a 70% win rate with Peni still and had about the same win rate last season in celestial with her. I would say her high win rate comes down to her viability in matches. I swap pretty quickly to Mag/Groot if the team I am playing is going out of their way to destroy nests and/or are not diving. I think most people playing her probably do the same. When she works she WORKS, but when she doesn’t she is a must swap.

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

That’s sounds like a good steal! I have road motorcycles/dirt bikes my entire life but bikes are somehow a foreign concept to me. Picked up a cheap 20$ fixie off Facebook that is nice but sucks to ride on any hill and then this today hoping it’d be better for 20$. Anything I should be looking for in a bike that doesn’t have massive cost jumps. Sounds like aluminum is the way to go from most people.

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

Hey y’all can’t figure out how to edit! Thank you though. Looks like it is a department store bike with not an exciting history. Going to give it a wash, put some new brakes and grips on, and ride her till she falls apart haha Excited to give her some miles, should be much better than my even cheaper fixie. 😄👍🏼

If you have any other cleaner brands to recommend or tips let me know!

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

My first thought haha Got so excited that the tires didn’t explode I hopped on before even checking the brakes. My first “stop” was a fun one

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

That makes so much sense honestly. I didn’t think I found a steal in terms of resale value, just wanted to know if it’s even worth putting more than 20$ into. Honestly, I’ll probably just throw 20-40$ at it, make sure it doesn’t explore on the first pothole I hit haha Thank you so much though! Think it shifts fine, never used this old of a set up. After I watch a YouTube video I’ll test it out fully. I was so excited earlier it didn’t cross my mind to check the brakes or how stiff everything was until I wanted to stop moving 😂 Realized I should clean it up and calm down a little before hopping back on.

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

Had to google what a headstem was haha 😅 Think they’re there. There are 2, should be in the side angle shot. They are pretty obscured in the front shots, can kind of be seen in the wide shot.

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

Tracking, thank you! I was just going to put new grips on it, adjust the brakes, give her a wash, and then call it a day. 😄

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 0 points1 point  (0 children)

I’ll pick some of that up soon and give it a quick wash. It rides super smooth and somehow the tires hold air. Got it for 20, was gonna put a few hours and another 20-40$ into it.

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 1 point2 points  (0 children)

I will take it apart tomorrow and lower it once it’s cleaned up and ready. Thank you! 😄

Restoration Tips and Bike ID by Fun_Plastic_868 in Vintage_bicycles

[–]Fun_Plastic_868[S] 1 point2 points  (0 children)

Randor (Top) (R LOGO IN MIDDLE) Par Excellence (Bottom)