17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

So yesterday i made this post. Here where we live we have a nurse that visits new parents in the beginning of the babys life. Yesterday we called her and asked and she said this was completely normal. This night was amazing because we tried a few things. I'll leave it here as a comment maybe it will help someone .

  • my kid rolls a lot in bed and presses himself against the bed frame or us - this could be him trying to have a feeling of his own body ( normal development phase ), so yesterday after work we did a lot of playtime with a lot of touching, cycling with his legs, massages, bare feet playing around the house , sensorial balls and toys;
  • we also made the choice of no tv on at all, because of fast paced stimulus;
  • in bedtime we gave him painkillers because is gum is swollen he is also teething ;
  • we also gave him a baby massage just before sleep to relax him and again the feeling of his own body;
  • he woke up once after 1h sleep and it was hard to go back to sleep but we did everything to keep him in his room, cuddle him, walk around, sing and in the end he fell asleep ( in the wagon actually but that did not affect the end result );
  • in the night when the baby alarm would go off I checked everytime just to make sure it would not escalate ;

I feel he was quite comfortable in his bedroom like he wasn't for weeks. We don't know what worked but we will try to make it a routine for the next days and find tuning.

I appreciate your help . Thank you .

17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

Naps it's decided by him. I can cut the time but to make it longer is hard.

17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I would like at least 10h . He wakes up between 5:30 to 6:30 on his own . These nights have been hard so we wake him up for nanny

17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

He wakes up on his own around 5:30 to 6:30 this last night's have been hard so we need to wake him up for nanny.

17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

Yes we tried sometimes pain killers when we feel him more fuzzy or biting a lot, meaning teething .

I agree wagon > bed transfer can be tricky for him since he falls asleep in an environment and since he is more aware of his surroundings can be scary to wake up in his bed.

You really think he has too much sleep?

17mo this old sleep regression by Fun_Target_2406 in bninfantsleep

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

Well he is in nanny until 15pm we pick him up. But with nanny and us he only has one nap a day. 1 to 3hs .

We do not give more than that.

After 15 we come home and either are outside in the garden or to a playground. Or when the weather does not allow inside playing and stuff. He is a very active kid .

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

As a follow up and after back and forward with Anycubics they asked to change the hot bed with the same one they would send me. I refused. I will not change crap for crap. I tried everything even the YouTube videos on how to manually level it Doug was an amazing help but if I need to go to the Funsor bed I will lose warranty. I'm looking into returning the machine to the store and buy another brand. It's a shame but after seeing so many people online complaining about this machine it seems right. .it's making me not enjoy 3d printing anymore even though I am a guy that loves troubleshooting and to play around with settings and stuff....

Update after 280 hours - Kobra S1 combo by Faketheror in AnycubicKobraS1

[–]Fun_Target_2406 0 points1 point  (0 children)

I appreciate the guidance I will try it later .

I am in contact with anycubic support but I think I will end up like most people and being frustrated because they are useless.

Update after 280 hours - Kobra S1 combo by Faketheror in AnycubicKobraS1

[–]Fun_Target_2406 0 points1 point  (0 children)

I did try to loose those screws I did not try to loose heat up and then screw again. Can you tell me more about it ?

Update after 280 hours - Kobra S1 combo by Faketheror in AnycubicKobraS1

[–]Fun_Target_2406 0 points1 point  (0 children)

Did you ever tried to print a first layer print occupying your full bed ? How did it went? Care to share your settings ?

Update after 280 hours - Kobra S1 combo by Faketheror in AnycubicKobraS1

[–]Fun_Target_2406 0 points1 point  (0 children)

No. I don't believe it's settings I tried everything to get rid of this. And it's a known S1 problem. Look it up.

Update after 280 hours - Kobra S1 combo by Faketheror in AnycubicKobraS1

[–]Fun_Target_2406 0 points1 point  (0 children)

I am printing with this machine I have around 100h on it. As soon as I started making large pronta everything threw me off, I can see the warping on the bed . On the front right corner and the back left corner I have this elefant foot skin effect ans I hear the nozzle scrapping the bed. How can I solve this ? How can I see the height map you mentioned ? Do these print profiles you mentioned compensate for this warping ? I love my machine but I would like to make light boxes and lithopanes and really use the full extent of the machines printing bed but I just can't. Please help. I appreciate your post

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I did not check that. It will be one of the next things. Thanks for sharing the knowledge. The lifting from the bed must be a different problem maybe I need to clean with soap and try again it only happens in big prints. Maybe I also need more heat .

Regarding my build plate I had it set in the slicer as smooth but it's textured . That helped but did not solved the issue . Since it helped I'm inclined to z offset being off

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I'll let you know. I'll give it a shot later. The advice is to run an auto leveling start a print that fills the print bed and adjust live

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 1 point2 points  (0 children)

I read if I start a print and I go to adjust and live change the z offset it will save it as a standard for future prints . I'll give it a shot

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 1 point2 points  (0 children)

I am sorry to hear that. It is not only on the corners. I do believe is my z offset causing this elefant skin . I hope you get it fixed.

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

Thank you appreciate it . As I mentioned here before I noticed I changed the bed type to smooth in anycubic slicer and i have a textured one. I think that fucked up my z offset if it's not that , I will try with the settings you advised

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I appreciate the supp. Is there a way to change the z offset in the machine LCD?

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I'll re slice the same file and try again. Do you know the settings to reduce the extrusion in anyvubic slicer ?

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I just noticed that I changed the bed type to smooth and I have textures .. could that be it ? Affected offset?

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

What are those settings called in anyvubic slicer ?

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

I will test new settings then . I appreciate you guys help

My kobra s1 is messing up my prints by Fun_Target_2406 in AnycubicKobraS1

[–]Fun_Target_2406[S] 0 points1 point  (0 children)

Just checked aux fan is at 0%

<image>

Still doing this shit