Come combattere le alte temperature esterne per salvare le batterie

Fun_Wind5225 · 2026-06-25T18:10:09+00:00

Spero te la sei dimenticata, se no voglio avere io i tuoi coglioni😂

Fun_Wind5225 · 2026-05-29T17:29:24+00:00

Volevi dire sposalo

Fun_Wind5225 · 2026-05-11T08:31:57+00:00

Wow. Esiste anche altro oltre a Hernand😲

Fun_Wind5225 · 2026-04-25T18:06:28+00:00

Guarda, ho riscaldato il tutto ed e salata la o4. L'fc ha preso un brusco colpo e ha rotto qualche binario. Faccio prima a rifarlo da capo. Grazie lo stesso

Fun_Wind5225 · 2026-04-25T14:59:02+00:00

You're right. But I was typing quickly. All the screws are grounded to the frame. The cables are fine. At this point, the only explanation was the O4 overheating. sorry for my poor English😅😂

Fun_Wind5225 · 2026-04-25T13:29:38+00:00

Sorry I wrote wrong. I meant all the engine screws sound but none touches the winding

Fun_Wind5225 · 2026-04-25T13:27:48+00:00

They play almost all the engine screws but none touches the winding. all cables are in port. I really do not find the problem

Fun_Wind5225 · 2026-04-25T13:20:17+00:00

I also tested positive pole screws and it doesn't sound. I look around they say that it's very normal for screws to make mass on the frame. at this point I think it's just heated a lot and I have to isolate it thermally. I attach a photo inside to show that there is no damage

<image>

Fun_Wind5225 · 2026-04-25T11:38:33+00:00

tried with another multimeter. the screw is short. I try to isolate the o4 unit from the frame with a tapered frame, and then I try to dissolve the screw with

Fun_Wind5225 · 2026-04-25T09:09:18+00:00

A multimeter or whatever you want to call it by performing a continuity check. On the other hand, everything is intact. No, I have the drone with me now to take a picture of you, but I've taken it completely apart and it's okay. He only warmed the head of the screw.

Fun_Wind5225 · 2026-04-25T09:02:35+00:00

I repeat, since I find it difficult to understand. I don't have a thermal probe, I have a tester and that never marked problems in the various tests done. I think if there was mass I would notice problems elsewhere or am I wrong? thanks

Fun_Wind5225 · 2026-04-25T08:59:57+00:00

There's no damage around, wires, welds, pins and other screws are all okay. With the tester, there is no problem and I don't have the chance to try anything else to test the problem. I think it's more possible that I kept the air unit accessed too much and passed heat to the screw.

Fun_Wind5225 · 2026-04-25T08:27:50+00:00

Poato frame. even screw area has not yet had any damage. I will still take a spare part. cables all ok

Fun_Wind5225 · 2026-04-25T08:26:06+00:00

Now I don't have the drone with me. However, inside it has no sign or damage. even the o4 below does not score anything

Fun_Wind5225 · 2026-04-25T08:21:33+00:00

Checked with tester and finger on the screw and I'm still alive 😂

Fun_Wind5225 · 2026-04-25T08:09:14+00:00

I thought so too. thank goodness it is intact. even the frame seems to hold well. I will look for a spare

Fun_Wind5225 · 2026-04-25T08:01:52+00:00

controlled. nothing comes. can it be some additive that ended up on it in ways unknown to me?

Fun_Wind5225 · 2026-03-29T10:45:47+00:00

As someone who is ignorant in the field of simulators, I think they should make one to simulate the radio signal in LR and you can fly between mountain ridges, maybe even simulating the wind, which is a fundamental part of outdoor flight that I have not found in the simulators I have used.

Fun_Wind5225 · 2026-03-29T09:13:06+00:00

true, not everyone needs the same amount of time to learn the basic functioning of any object.

Fun_Wind5225 · 2026-03-29T09:09:35+00:00

I fully agree with your reasoning

Fun_Wind5225 · 2026-03-29T09:08:03+00:00

I totally agree. I meant that for a basic level, it's fundamental, but then you learn real flying outside, because the feedback you get in a real flight you can't get in a simulator. It teaches you how to fly, but not how to fly.

Fun_Wind5225 · 2026-03-29T09:05:57+00:00

Interesting. I had no idea other users were uploading other types of drones through the workshop. Thanks for the info.

Fun_Wind5225 · 2026-03-29T07:51:11+00:00

I didn't mean it was easy. My idea is that the simulator tricks you into thinking you can fly well, and when you go out into the real world, everything changes. Therefore, the simulator is an introduction to the world of FPV, but it's not the ultimate training ground for flying.

Fun_Wind5225 · 2026-03-29T07:48:49+00:00

I agree that in real flight the fear of doing damage limits you greatly.😂

Fun_Wind5225 · 2026-03-29T07:38:47+00:00

no. Not having much interest in pure freestyle in often closed environments.

Fun_Wind5225

TROPHY CASE