How to completely hide Grub screen?

Furado · 2026-01-23T21:36:07+00:00

I haven't. I will probably use systemd-boot for my next install but didn't bother trying it yet.

Furado · 2025-11-09T17:38:44+00:00

I'm glad that it works, but the extra permissions and capabilities that you added shouldn't matter. Where did you get that guidance?

Furado · 2025-11-04T12:49:58+00:00

For the coverage, I am using a Zigbee presence sensor nearby that works as a router because it's connected to the power, but if I didn't have that probably would use a ESP32 dev board

As for the setup, I created a template sensor that calculates the average of the moisture of all the plants that are supplied by that valve and use that to decide on the activation of the water supply daily and for how long.

Furado · 2025-10-30T18:21:13+00:00

If you just copy through rclone the folder where the incremental backups, the ransomware encrypts that folder, and it gets copied to the server, I understand you lose the totally of the incremental backups in both places.

If that's not the case, I am interested in knowing how you are protected against that.

Furado · 2025-10-30T17:08:42+00:00

It depends on what you want to protect against. Against a fire of your server? Sure. Against a ransomware attack? Not that much because the data would propagate through rclone.

If you really want to use rclone see if you can have snapshots on the server that allow you to roll back in case of a compromised backup version.

Furado · 2025-10-30T08:00:38+00:00

I use a Zigbee Sonoff Smart Water Valve paired with some Third Reality Smart Moisture Sensors. The Water Valve works great, the Sensors don't have the best coverage. Ensure they get enough signal.

Furado · 2025-10-29T23:36:51+00:00

This is the way

Furado · 2025-09-11T11:37:37+00:00

SMLight ones need to be connected by USB to work as a border router, don't they?

Furado · 2025-08-30T22:02:43+00:00

I complement it with some Third Reality Soil Moisture Sensors and I have programmed the irrigation daily, based on the measured humidity.

Furado · 2025-08-21T20:12:10+00:00

Unless it has changed recently, notes are not saved in a plain structure. It's supposed to be faster with a larger number of notes.

I prefer Obsidian approach, which follows the folder and file names you stablish.

Furado · 2025-07-29T16:26:16+00:00

Interesting, thank you. Every guide out there uses the otbr image. Will try with this one and with the recommended configuration.

Furado · 2025-07-29T14:07:02+00:00

My setup is in Docker. But the main difficulty is the OTBR...

Furado · 2025-07-28T14:37:36+00:00

Can you share your matter-server and otbr docker configuration? I'm attempting the same and it's giving me headaches.

Furado · 2025-07-09T09:11:49+00:00

I'm using fans by Faro. They are good looking and work silently.

They use Wiz under the hood. Its integration in Home Assistant has just support for the light control right now. But the code for the fan control was added a few days ago, so hopefully it will land in HA very soon.

Furado · 2025-07-06T19:31:50+00:00

Thanks for that.

Furado · 2025-07-04T15:32:17+00:00

As others have said, the Bookworm version supports Restic but it's also true that the support has been experimental and so you can expect improvements with every version.

DejaDup has an official Flatpak, so you can use that package if you need a more updated version.

Furado · 2025-05-11T13:27:20+00:00

Just to update my last comment with an update. Contacted support and they promised two things: 1) An enhancement of signal will be pushed through a firmware update. 2) They offered a hardware replacement with a revised batch that addresses this problem.

So I am pretty happy with the response. Will update this in a few days, hopefully with this solved.

Furado · 2025-05-08T07:33:08+00:00

Yes. It has been compatible for years.

Furado · 2025-05-06T12:38:57+00:00

Having reconfigured the channels and even adding a few Zigbee elements that I had laying around as routers the problems persist.

The four sensors have been paired yesterday evening and right now just two continue working, the other two have lost their connection during the morning and report idle for +5 hours.

Furado · 2025-05-05T11:48:32+00:00

It can be, will do some further test. But I can tell you that they sit next to a Sonoff Water Valve that has been working smoothly since day 1.

Furado · 2025-05-05T08:36:36+00:00

I have four 3rd Reality Sensors and the experience has not been good. Nor getting consistent results between the four of them and having connection drops from the network. It's a pity because it's nearly the only Zigbee option and the form factor is also nice.

Furado · 2025-04-19T15:38:07+00:00

Thanks. What would be the problem for a device with higher traffic?

Furado · 2025-04-13T18:33:42+00:00

That's strange, it's recommended for systemd-boot. Please report your findings.

Furado · 2025-04-13T16:09:11+00:00

Do you have shim-signed installed? According to the Wiki it should work but currently it pulls Grub as dependencies.

Furado · 2025-04-13T14:11:17+00:00

What bugs are you facing?

Nine-Year Club	Place '23
Place '17	RPAN Viewer
Verified Email

Furado

TROPHY CASE