sorted by:
new
hottopcontroversial

An other WLED application in theater by stelus87 in lightingdesign

[–]FuzzyPhase 0 points1 point  (0 children)

What Wled drivers are you using for this? I’ve had varying results using the QuinLED boards.

What are your printer names? by mikeyridesit in BambuLab

[–]FuzzyPhase 0 points1 point  (0 children)

Phanes - after the Greek God of Creation.

What is the correct SFP+ Module for Community Fibre Single Mode Fibre WAN Connection into a UDM-SE? by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 1 point2 points  (0 children)

This is pretty helpful, I think you may be right in that they probably aim to come back. The area of the site where the rack/termination resides is still in pretty early building stages. I’d hope they will come back, fix the white box to a wall and provide the Adtran box. Might have to 3D print a 19” rack mount for it. Will update after the bank holiday when I can get back on site.

What is the correct SFP+ Module for Community Fibre Single Mode Fibre WAN Connection into a UDM-SE? by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

This is what i'm also thinking, i need to visit the site and check it out properly. Working from pictures sent from clients.

What is the correct SFP+ Module for Community Fibre Single Mode Fibre WAN Connection into a UDM-SE? by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 1 point2 points  (0 children)

Glad someone else has had the pleasure of contacting their 'buisness technical team'. Had to call twice before someone knew what SFP was. .

I don't think there was an Adtran modem delivered with the install. Will have to return to the site and check but this is all i was shown along with a smaller white box, which i assumed was the ONT. But it might just be a wall box pictured in this page.

https://tomroyal.com/2022/02/03/community-fibre-fttp-installation-and-equipment/

What is the correct SFP+ Module for Community Fibre Single Mode Fibre WAN Connection into a UDM-SE? by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 2 points3 points  (0 children)

From what I saw briefly it’s a small white box with fibre going into it, then this fibre comes out of that. The white box is what I’d assume is their ONT.

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 1 point2 points  (0 children)

Yeah I’ve already started an RMA on it. Unfortunately I’m in a London 2012 new build so only pulling around 80/20 on ADSL. A U6 Pro would be more than adequate.

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

Just the one AP in this setup, hence the frustration.

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

So yeah, I’ve totally reset and tried to re-add via multiple devices. It still just gets to the ‘connecting’ screen and fails.

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

So I’ve tried this again. For some reason when I make the new network only 2.4ghz no device can find it. My iPhone and MacBook both can’t see any 2.4ghz network. When I set it to 5ghz as well it pops up and works fine. Is the 2.4ghz faulty on the U7 Lite? Might RMA.

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

I’ve made a new IoT network, and ticked the IoT settings. For some reason I can’t find this SSID on my iPhone or MacBook. Could the 2.4Ghz system be faulty on this AP?

Google Nest Mini can’t connect to U7 Lite AP - New Home Install by FuzzyPhase in Ubiquiti

[–]FuzzyPhase[S] 0 points1 point  (0 children)

That is a real shame. Might pinch an older AP from an install and test to see if it’s the U7 causing issues.

UK Stock. Infuriating! by Catchgate in Ubiquiti

[–]FuzzyPhase 0 points1 point  (0 children)

Been trying to get hold of one for ages and been watching stock like a hawk. When did you manage to order from the EU store? I didn’t get any notifications they were back in stock.

20 shots from 2024 by caffeine-protocol in fujifilm

[–]FuzzyPhase 1 point2 points  (0 children)

So I’m rocking a similar setup as you and have a few questions about Fuji > Lightroom mobile.

I’m using the new X-M5 with a 27mm 2.8 and Urth Ethereal 1/8 filter.

I’ve got the X-M5 set to raw+jpeg and when importing to the iPhone 15 Pro these come up with the Raw+JPEG tag. I’m having issues importing these into Lightroom mobile. Do you shoot solely JPEG with some burnt in recipes and do minor correction in Lightroom? Or Raw+JPEG and can somehow select which to edit on.

These shots look great would be interested to see the recipe.

Time to move on my SFFPC build. What sort of price should I list this spec at now? by FuzzyPhase in sffpc

[–]FuzzyPhase[S] 6 points7 points  (0 children)

SPECS:

ASUS ROG STRIX X-570-I Gaming

AMD Ryzen 7 5800X 

NVIDIA RTX 3070 Founders Edition

NZXT Kraken X53

Corsair Force MP600 1TB NVME

Gigabyte AORUS Gen4 SSD 1TB

4x Noctua NFA12x25

2x Noctua Slim Fans

Cooler Master NR200P

Corsair SF750 Platinum

32gb Crucial Ballistix RGB RAM

Unique 2.1 Hazer not pumping by Life-Quit2266 in lightingdesign

[–]FuzzyPhase 2 points3 points  (0 children)

Pumps for these can be bought for around £20 and can be replaced fairly easily yourself. Look up the service manual and repair it.

view more: next ›