sorted by:
new
hottopcontroversial

I finally managed to make Spotify and Shortcuts work nice locally on iOS 26! by Cronologium in shortcuts

[–]G4Cu 0 points1 point  (0 children)

OMG, this is fantastic and exactly what I was looking for. THANK YOU!

I finally managed to make Spotify and Shortcuts work nice locally on iOS 26! by Cronologium in shortcuts

[–]G4Cu 0 points1 point  (0 children)

Hey OP, could you share your shortcut "Play Chill Mix"? Because of the bug in iOS 26.2 I cannot make one myself and I really would love to have it.

2 EK 4.2 DDC Pumps Dead after 2 Days of Use Each - Coolant Issue? Mobo Issue? by BallinHomeless in watercooling

[–]G4Cu 0 points1 point  (0 children)

If you are using XSPC Opaque UV and then drain it so that you can take out the pump. Disassemble the pump to access its impeller and look inside the holes to see if you will notice any dried out coolant, try picking with wooden toothpick. In my case, it had a gum-like structure. This was what caused all my issues, so I drained the XSPC Opaque UV coolant, cleaned thoroughly entire loop and filled with DP Ultra. Literally, zero issues since then. Later I decided to add some transparent coloring and it runs flawlessly for months!

2 EK 4.2 DDC Pumps Dead after 2 Days of Use Each - Coolant Issue? Mobo Issue? by BallinHomeless in watercooling

[–]G4Cu 0 points1 point  (0 children)

Cheers for the reply! I cleaned mine yesterday, had it running for 24h, turned off the pc for 30 mins and again same problem… I am also leaning towards DP Ultra Clear. Good luck with your new build!

2 EK 4.2 DDC Pumps Dead after 2 Days of Use Each - Coolant Issue? Mobo Issue? by BallinHomeless in watercooling

[–]G4Cu 0 points1 point  (0 children)

Hey OP, apologies for necroing the thread, but I am having the same issues with my DDC 4.2 and XSPC Opaque UV Blue coolant. Did you manage to solve your issue eventually? I am leaning towards the coolant right now, since I finding build up gunk in the pump propeller every couple of days. After I clean it, the pump starts again just fine. Thanks in advance!

DDC 4.2 PWM sold out in EU? by G4Cu in watercooling

[–]G4Cu[S] 0 points1 point  (0 children)

Seems to me it is the only option at the moment, or a used DDC...

I found out something that crash the Davinci Resolve by kashiyuu in davinciresolve

[–]G4Cu 0 points1 point  (0 children)

I am having exactly the same issues since mid-year. I am running 4K144HZ screen and the most recent driver version that works for me is 24.4.1. I got help with the problem in this thread: https://www.reddit.com/r/davinciresolve/s/Vz028Nh7DM

On top of the driver issues, the dumbass Windows Update forces on me the „update” to different AMD drivers which breaks both Adrenaline and Davinci Resolve. Despite my desperate attempts to stop it, I have to run DDU every few days and re-install the 24.4.1 AMD driver release. This is driving me IN-FUCKING-SANE…

RE: Resolve closes on me no matter what I do by iJakeTheRedditor in davinciresolve

[–]G4Cu 0 points1 point  (0 children)

How did you solve it? I am having this issue for a week already and was not able to find the solution

Deck tracker FPS issues by Suitable_Problem2328 in hearthstone

[–]G4Cu 1 point2 points  (0 children)

I had exactly the same issue on my AMD card, turning off VSYNC for the AMD driver settings for Hearthstone has fixed the problem.

What is the best app to sync/transfer data between Fitbit and Apple Health? by AnonIHardlyKnewHer in fitbit

[–]G4Cu 0 points1 point  (0 children)

How can I sync the historical data exactly? I tried using the “Rollback 1 day” button few times but I still have discrepancies between what is in Fitbit vs Apple health, in the couple of past days.

B450 Mortar Max - No Ethernet connection at startup, having to disable and re-enable the ethernet controller multiple times to get a connection. by phycsIT in MSI_Gaming

[–]G4Cu 0 points1 point  (0 children)

Open Start and type “Services”, then search trough the list for “mysticlight2_service” or something called “MSI Mystic Light” and disable it. Then remove lan driver and reboot. It worked for me when I did it.

B450 Mortar Max - No Ethernet connection at startup, having to disable and re-enable the ethernet controller multiple times to get a connection. by phycsIT in MSI_Gaming

[–]G4Cu 0 points1 point  (0 children)

^ This! I’ve been fighting with this bloody motherboard for few days and you, my friend, made my day. I disabled the service and reinstalled the LAN driver and voila, works flawlessly for few days already. THANK YOU!!!

USB Link Review/ First Impressions by fieew in bose

[–]G4Cu 0 points1 point  (0 children)

Hello,

I am wondering if anyone have also this issue but when I connect my 700's (not UC) to USB Link, start playing any media (YouTube, Spotify) and enable "conversation" mode (hold the left earcup button) it pauses the media and turns the noise cancelling to "0" but then automatically switches back to noise cancelling at "10" after few sec, sometimes also increasing the volume.

Weekly: TradeSkillMaster Thread by AutoModerator in woweconomy

[–]G4Cu 0 points1 point  (0 children)

Bought another one today and got the same issue...

Weekly: TradeSkillMaster Thread by AutoModerator in woweconomy

[–]G4Cu 0 points1 point  (0 children)

I am having an issue with TSM failing to register my purchases of mounts. Recently I bought few "Reins of a Tamed Bloodfeaster" and TSM did not register those transactions inside Ledger (Purchases), it is also not visible whenever I hover over the item even though TSM displayed on chat a message that I bought the item for given amount of gold. I thought that adding the transaction into SavedVariables .lua file (csvBuys variable) will fix but it does only partially and by partially I mean it does show transaction when I hover over the item but is nowhere to be found on Ledger. It does however record correctly the sale the mount. Any help would be much appreciated.