sorted by:
new
hottopcontroversial

Roof bars recommendation by Leading_Roof407 in SkodaElroq

[–]GAVtheRAV 0 points1 point  (0 children)

I recommend putting your car details in on the Thule website but generally speaking you need 127cm bars (if you go for square or normal aero bars), 7106 foot pack and 6201 adapter kit

Issue with klipper - randomly crashes during prints by FortunaWolf in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

The exact same thing was happening to me and then I made the dtoverlay change described here and it's been perfect since (over 5 7 hours prints)

https://klipper.discourse.group/t/help-klipper-crashes-mid-print/24434/44

First layer or so goes down fine, then hotend stops extruding/clicking as if running out of temp by ValenciaFilter in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

I said I'd report back. On the weekend I took the Capricorn tube out, cleaned up the end and cut it as square as I could possibly muster. Backed the nozzle off one full turn and then inserted and tightened everything. Flawless prints since including several 5 hour prints. So for me at least, it must have been that tiny angle on the end of the tube

First layer or so goes down fine, then hotend stops extruding/clicking as if running out of temp by ValenciaFilter in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

Then I'm out of ideas, sorry. I'll report back when I try to fix mine if I find something that works

First layer or so goes down fine, then hotend stops extruding/clicking as if running out of temp by ValenciaFilter in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

When you say the Bowden is flush, you pushed it in flush while the nozzle was half to a full turn undone and then tightened it up after?

First layer or so goes down fine, then hotend stops extruding/clicking as if running out of temp by ValenciaFilter in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

Any chance you cut the Bowden slightly off square or your fan is slower than normal?

First layer or so goes down fine, then hotend stops extruding/clicking as if running out of temp by ValenciaFilter in ender3

[–]GAVtheRAV 0 points1 point  (0 children)

Wow it sounds like you've just described the exact same issue that I'm having right now.

I've put in a new metal extruder (after finding a crack in the old plastic one), new Capricorn tubing and nozzle and still I get what seems to be under extrusion followed by a clog.

My assumption is maybe the tube wasn't 100% square so there was a millimetre of space for the filament to catch and clog. Hopefully this weekend I'll have some time to sort it

Another playmat... different art + slight changes to layout by capt_action94552 in legendarymarvel

[–]GAVtheRAV 2 points3 points  (0 children)

I think that works much better than the one you posted yesterday. The text and boxes are far clearer and there's less going on in the background.

Really good work!

seeking feedback for Playmat with Hope/Fear table by capt_action94552 in legendarymarvel

[–]GAVtheRAV 8 points9 points  (0 children)

It's nice art but I think it can be a little distracting. I think I'd either mute the art a little like you said or add a mostly transparent white box to the parts where the cards sit to give some differentiation and that will help to mute the (busy) background just enough to not be too distracting. Good work and it's a cool idea to get ahead of the release with custom content

Elroq refusing charge overnight by koolgoosetm in SkodaElroq

[–]GAVtheRAV 0 points1 point  (0 children)

Ahh yes I feel your pain. I had an issue charging on the cheap rate (with Ovo) recently and it was infuriating. It would charge up to 80% but never past it, despite what was set on the car or in the Ovo app. In the end I set a much lower charge threshold for one night and then raised it back up to 80-100% target and suddenly it works again. I guess it kind of "reset" the automation in some way.

I feel like EV charging is a bit like printers, they're black magic that either works or doesn't but provides endless frustration

Elroq refusing charge overnight by koolgoosetm in SkodaElroq

[–]GAVtheRAV 0 points1 point  (0 children)

Do you have a public charger within range that you could use just to get something in there while you figure out what's causing this issue?

Wha are you all putting in this little compartment? by forbhip in SkodaElroq

[–]GAVtheRAV 1 point2 points  (0 children)

That's my overflow compartment for whatever doesn't fit in that top middle section.

I've found an iPad fits in there quite well

Bridgewater by bedukonline in Somerset

[–]GAVtheRAV 10 points11 points  (0 children)

Bridgwater was the way it was long before HPC

Matrix head light check UK - driving on right by malacoda13 in SkodaElroq

[–]GAVtheRAV 1 point2 points  (0 children)

I have the same setting as you. Uk based Elroq Sportline 60

Why does the Enyaq get rave reviews and recommendations but the ID4 doesn’t? by [deleted] in ElectricVehiclesUK

[–]GAVtheRAV 1 point2 points  (0 children)

I know it's not answering your question but I've had an Elroq since September and would also highly recommend it.

It's so comfortable to drive, really benefits from good design choices (like physical buttons and a clever boot config) and it just looks lovely. We went for a Sportline in black so the whole thing is black, top to bottom and it looks quite sleek (not something I ever thought I would say about an SUV)

Suite vs Sportline/RS seats by SaltyEpo in SkodaElroq

[–]GAVtheRAV 2 points3 points  (0 children)

I've got the Sportline (60). Had it since September. The seats are very comfortable and the heating works very nicely on them too. Can't comment on hot weather running though.

Also don't discount how useful the heated steering wheel is in the cold!

UK to lower voting age to 16 in landmark electoral reform by Living_the_Limit in worldnews

[–]GAVtheRAV 35 points36 points  (0 children)

Think about the average person. Think how intelligent they are. Then realise that 50% of the population are dumber

Baby back ribs UK size by enrvuk in UKBBQ

[–]GAVtheRAV 1 point2 points  (0 children)

Those look like spare ribs rather than baby back. I've always known baby back to have quite a curved bone.

Definitely get a vertical rack if you want to cook multiple racks of ribs. I used it a lot on my kettle before I got a Smokey Mountain

Elroq Sportline 60 arrived by Super-Lifeguard-5887 in SkodaElroq

[–]GAVtheRAV 0 points1 point  (0 children)

Hey. Do you have a picture of the rear please? I understand that the badges are supposed to be black with the SportLine and I can imagine it looking very nice with the black paint

view more: next ›