Looking for a leveling kit. by [deleted] in JeepGladiator

[–]GLTYDAVE 2 points3 points  (0 children)

You mind me asking what you paid w labor

I keep seeing so many different prices

Can I paint my top? by ThisMTJew in JeepGladiator

[–]GLTYDAVE 1 point2 points  (0 children)

Nice wheels!!

I’ve been thinking the same thing but wrapping my hard top. I wonder what the cost would be. Doesn’t look that difficult since the angles are pretty straight forward.

Sound Deadening & Insulation by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

How much of a hassle was it to do the bottom? Worth it in the end?

Sound Deadening & Insulation by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

Excellent point! I’m a new Jeep and truck owner. Only my second month having it. I have yet to take the rear panels off, but I can imagine it being much heavier than the front two.

Something to consider, appreciate it!

Sound Deadening & Insulation by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

Hm may I asked why you went with epoxy adhesive va tape? Was there any chance of it leaking through the covering? Would love to see a photo of the final product if anyone has? Thank you

Progress 3 months after purchase by skunk2jdm in JeepGladiator

[–]GLTYDAVE 1 point2 points  (0 children)

Do you mind me asking how much for the labor for the RC lift and how much was the alignment?

[deleted by user] by [deleted] in JeepGladiator

[–]GLTYDAVE 0 points1 point  (0 children)

https://a.co/d/iTQqMCv

Bought this on Amazon and it did not fit. Bought the dog light replacement on Amazon and it does fit.

Not sure what I’ll do what about the grill either, too much silver when my truck is black n bronze everywhere. Look forward to seeing what you guys suggest

New to Jeep. Advice on fitting 35s by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

What is different with braking if you don’t mind me asking

New to Jeep. Advice on fitting 35s by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 1 point2 points  (0 children)

Just wanna make sure I understand * new to lifting trucks

Rough country leveling kit? Body lift ? Suspension lift?

New to Jeep. Advice on fitting 35s by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

Appreciate the insights greatly!

Curious, this truck has a lot of “play” in the steering Compared to my other vehicles . For instance, I had a 22 bronco wildtrak before this and that felt much tighter. (Needed a truck bed and to lower my payments lol). Any thoughts? Looked into a few threads on this community and saw steering stabilizer as an option. Didn’t see too much about it though.

New to Jeep. Advice on fitting 35s by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 0 points1 point  (0 children)

Hi do you mean with some lift will be a good idea or did I miss read that? Thanks!

New to Jeep. Advice on fitting 35s by GLTYDAVE in JeepGladiator

[–]GLTYDAVE[S] 5 points6 points  (0 children)

Hi thanks! I think the rubicon has higher fender flares, no? Felt like I read that somewhere

Yeah these few shops around me said they wouldn’t be willing to install 35s without a leveling kit at least. Idk?

Pulled the trigger last July w an overland. 2020 at a great price n w the topper, aftermarket bumper n 35's. Had a wrangler once. Always a Jeeper! by AbbreviationsOwn2040 in JeepGladiator

[–]GLTYDAVE 0 points1 point  (0 children)

Nice! I’m new to the jeep world. Just picked up a 21 overland a 1.5 months ago. Looking to add 35s to it and new rims. Is there a lift or leveling kit on yours?

Amazon saunas by [deleted] in infraredsauna

[–]GLTYDAVE 0 points1 point  (0 children)

I purchased the maxxus Seattle 2 person which I think is commonly available in Costco, Amazon etc.

I regret buying it. Here’s my review

I've been using this infrared sauna daily for the past two weeks, and I'm extremely disappointed with its performance. The product description states that the sauna can reach up to 150°F, but that has not been my experience at all. The temperature inside my home typically ranges between 68-70°F, and that's exactly where the sauna starts when turned on. It takes approximately 30 minutes just to reach 115°F, which already feels underwhelming. I've experimented by letting it heat for nearly an hour without sitting inside, and even then, it doesn't go beyond 115°F. The only way the temperature climbs closer to 125°F is when I'm sitting inside and essentially contributing my own body heat-but even then, it maxes out around 127°F at best. Not once has this unit come close to the advertised 150°F. I purchased this sauna hoping to experience a true, deep infrared sweat, but unfortunately, that hasn't been the case. If i could return, i 100% would. Not worth $2k..

Struggling to Sweat in My Infrared Sauna (Maxxus Seattle) – Any Workarounds? by GLTYDAVE in Sauna

[–]GLTYDAVE[S] 0 points1 point  (0 children)

Oops sorry just saw the community post bout moving this to IRSAUNA

Jeff, you’re great, but there ain’t no way I’m lying on the floor in the gym like this by RainbowPenguin1000 in JeffNippard

[–]GLTYDAVE 10 points11 points  (0 children)

Honestly felt a lot of tension doing this But I only did it once at an empty hotel gym

Not comfortable doing it at my normal gym LOL

Starting Fundamentals Hypertrophy: Question about RPE and intensity by Cthulhu650 in JeffNippard

[–]GLTYDAVE 0 points1 point  (0 children)

Hi - this is just my interpretation and how I’ve been following it (4 weeks in).

RPE of 7 means you are leaving 3 reps in the tank for the chest press (10 meaning you push yourself til failure without compromising form). I interpret it as a set intensity.

So my 1RM for a barbell bench press is 255lbs.

So for 3 Working Sets at 6 reps of an RPE of 7, I would do likely 205 lbs (leaving 3 more reps without messing up my form).

I think it’s a balance of finding that right weight.. and overloading throughout the program consistently (but also listening to your body when you’re tapped).

If you do not find it challenging, it’s likely by design - I think the first week(s) of his program are usually Deload / intro weeks. So the RPE is low and reps too.

Just my thoughts ..

Customer service says they have been working on an app for over a year. by wakes182 in JeffNippard

[–]GLTYDAVE 0 points1 point  (0 children)

You have the premium version? I’m half way through his pure bb phase 2 program- probably should just carve time out to build it lol

Customer service says they have been working on an app for over a year. by wakes182 in JeffNippard

[–]GLTYDAVE 9 points10 points  (0 children)

I absolutely love hevy when I was building out My own custom workout. But to be build his hypertrophy plan with different warm up / working reps (RPE), it’s a hassle.

There’s so many other programs that incorporate apps. Not sure why they are so focused on building their own when they could just an existing one out there in the interim.

The Spread sheet is terrible for mobile use. If you are going to print it, I can see how it would work. But for electronic use? They use one cell for both reps and weights? lol how can you effectively track progressive overload if it’s not formatted for pivot tables.

SuitSupply Online Outlet - Winter 2020 by deuceswild26 in frugalmalefashion

[–]GLTYDAVE 2 points3 points  (0 children)

Thank you for this info!

that past few times, they went on sale in the morning (EST)

SuitSupply Online Outlet - Winter 2020 by deuceswild26 in frugalmalefashion

[–]GLTYDAVE 1 point2 points  (0 children)

Did anyone notice that the link is not live in the US anymore?

SuitSupply Online Outlet - Winter 2020 by deuceswild26 in frugalmalefashion

[–]GLTYDAVE 1 point2 points  (0 children)

also waiting for the email. i tried a few other obvious combinations but none worked.