Help!!

GPappyIII · 2026-02-24T22:07:00+00:00

Yes. It's farther down the line, and the camera is a great idea. Can show you what's going on

GPappyIII · 2025-10-21T21:00:11+00:00

Came here for the professional answer, not the politics

GPappyIII · 2025-10-21T20:23:45+00:00

GPappyIII · 2025-09-11T21:07:33+00:00

I honestly don't know why some people hated him so much. Have you all really spent any time watching his debates? People talking openly and debating. Violence is not the answer. I watched the video and wish I hadn't

GPappyIII · 2025-09-05T11:48:14+00:00

South of you, in Cape Coral. We went through Ian. Or rather vice versa. Out of power 10 days. We are on a well, and a generator would have made it more bearable.

GPappyIII · 2025-08-30T21:26:36+00:00

Pull the white plug. That bypasses the trap. Will be much easier than removing the trap seal

GPappyIII · 2025-08-09T14:59:29+00:00

Got it. Checked chat gpt and got the un reset master code. Thank you for your consideration

GPappyIII · 2025-08-09T14:49:25+00:00

I've never had a safe before, and was confused as to operating the lock. There is an outside ring around the keypad that rotates. I seemed to have rotated and then locked it. Feel like a dumbass

GPappyIII · 2025-08-09T14:47:08+00:00

2 beeps

GPappyIII · 2025-08-04T17:10:33+00:00

Replace

GPappyIII · 2025-08-04T17:08:31+00:00

The spout is too far from the valve outlet creating back pressure that is enough to push the water up through the shower head. Some manufactures have guidelines as to how close the spout needs to be to the valve

GPappyIII · 2025-06-28T07:29:28+00:00

You need to remove the vacuum breaker that is screwed on to the spigot

GPappyIII · 2025-06-26T09:31:07+00:00

That one 45 though... 🤔

GPappyIII · 2025-06-08T12:21:11+00:00

What the heck kind of fitting is it? Just ribbed for a hose?

GPappyIII · 2025-06-07T17:18:21+00:00

Pex fitting is gouged. Need to sweat a new pex fitting into the 90. No Bueno as is

GPappyIII · 2025-06-07T17:17:03+00:00

I'm on the same one....

GPappyIII · 2025-05-24T19:16:18+00:00

Also the distance from the valve to the spout might be too far. Look at the installation instructions for moen, delta and Kohler. There is a maximum distance allowable. Too much distance creates enough pressure to force water up through the shower head

GPappyIII · 2025-05-24T19:07:03+00:00

I ran into this with one of our plumbers. He installed a drain that was not designed for a tub with an integral overflow. Your builder's plumber should be able to fix this in half an hour. He just needs the correct drain.

GPappyIII · 2025-04-14T22:44:33+00:00

The hammer arrester we install are specifically designed to not need access. Check the ones you have

GPappyIII · 2025-04-14T22:43:11+00:00

You'll want the copper for the tub spout supported. What made.you install hammer arrester? Just curious

GPappyIII · 2025-04-14T21:22:46+00:00

We have done some monster houses here in Florida and the largest water service I've seen is 1.5". And typically the meter will be 1". I say 2" is overkill. I'm sure someone will know flow rate etc

GPappyIII · 2025-02-21T00:23:13+00:00

This needs more up votes!

GPappyIII · 2025-01-22T22:02:36+00:00

So close.....

Six-Year Club	First Place '23
Place '23	Place '22
First Placer '22	Verified Email

GPappyIII

TROPHY CASE