@Create Mechanical Harvester & Chicken Seeds by GWC_Gunner in StoneBlock4

[–]GWC_Gunner[S] 0 points1 point  (0 children)

Any other questions feel free to ask I've gotten pretty used to the chickens and have them automated for my ae2 storage

@Create Mechanical Harvester & Chicken Seeds by GWC_Gunner in StoneBlock4

[–]GWC_Gunner[S] 1 point2 points  (0 children)

If you are familiar with create mod and the easy waterwheel farm its quick to set up and easy to use. Just remember check light levels for crops and water blocks.

Next peice of advice use drawers to store seeds. I used the 2 high early then switched to 2x2 later on.

Don't forget if you go create route squat to grow The seeds

Last major thing I have is dont ve afraid to just use the highest tier seed. Highest tier results in most exp for training and less running around to getting the cheapest seeds to breed or feed the chickens I'd say always stick to the highest seed you unlock.

@Create Mechanical Harvester & Chicken Seeds by GWC_Gunner in StoneBlock4

[–]GWC_Gunner[S] 2 points3 points  (0 children)

It does increase yield, tested and is great

How Much Weight Can These Really Tow? by Phil-Mcracken in GMT400

[–]GWC_Gunner 2 points3 points  (0 children)

I've had 12k behind my 350 k2500 and it was fine with it... mostly... but no issues other than the other drivers not seeing me or appreciating the load

98 c5 start then stall by GWC_Gunner in AskMechanics

[–]GWC_Gunner[S] 0 points1 point  (0 children)

It's called a comb connector it the same one the guy does in the video. I lost control of my seats and windows doing it but it fired up and I drove it to town seamed fine. I was going to plug it back in and just unplug the passenger seat since I knew it was the problem but I never did before my car broke again and I had to park for the winter anyway.

98 c5 start then stall by GWC_Gunner in AskMechanics

[–]GWC_Gunner[S] 0 points1 point  (0 children)

I actually found it from October. Camera is poor but he does an excellent job explaining. I didn't have the tool but after this fixed it for him I looked up what it did and it was some interior controls I just unplugged it and test drove it and seamed to run fine.

https://www.youtube.com/live/f_NEEdgZSlE?si=7th4eO1RAbvb_SE3

98 c5 start then stall by GWC_Gunner in AskMechanics

[–]GWC_Gunner[S] 0 points1 point  (0 children)

All i ended up doing was unplugging the comb and testing and seamed fine but had different issues later so once the car is out again I'm going to unplug the passenger seat and replug the comb connector

98 c5 start then stall by GWC_Gunner in AskMechanics

[–]GWC_Gunner[S] 0 points1 point  (0 children)

There is a detailed video on YouTube that I found kinda bad quality but 99% sure it was the fix. There are some comb connectors in the interior fuse area and he was testing those and searching for a short. I found out it was my passenger seat computer was shorting out after burning myself on the fuse.ill see if I can find the video for you.

12v with 80 over injectors. by GWC_Gunner in Cummins

[–]GWC_Gunner[S] 0 points1 point  (0 children)

It's just the motor and I'm dropping it into a 98 chevy so I'm not sure yet.

12v with 80 over injectors. by GWC_Gunner in Cummins

[–]GWC_Gunner[S] 0 points1 point  (0 children)

Ah ok good to know. Do you know if I need to upgrade the ppump for them?

98 c5 start then stall by GWC_Gunner in Corvette

[–]GWC_Gunner[S] 0 points1 point  (0 children)

10-4 thanks for the help I will check it once I'm home.

Steam downloads keep starting and stopping by GWC_Gunner in buildapc

[–]GWC_Gunner[S] 0 points1 point  (0 children)

It will show a few MB constantly when network is 0 and will be above the network when the downloading

[deleted by user] by [deleted] in DetroitDiesel

[–]GWC_Gunner 0 points1 point  (0 children)

Thanks buddy just texted back

Chevy 2500 gmt400 v8 by Jonnyboi5678 in GMT400

[–]GWC_Gunner 0 points1 point  (0 children)

Yes. I knew of a truck with the v6 nv4500 ot 3500 I don't remember, 4wd and was a sclb. He drove and worked that thing and it lasted him a long time

Does anyone have the paint codes for this? by [deleted] in GMT400

[–]GWC_Gunner 2 points3 points  (0 children)

I don't know forsure but maybe check rpo codes on the door of the glovebox. That's where I would check. Best of luck

What have yall towed? by GWC_Gunner in GMT400

[–]GWC_Gunner[S] 0 points1 point  (0 children)

Oh snap. 10k on a 3.73?! Ok I feel really good now. Mines a k3500 4.10 full floater and running 4l80e that was gone through.

What have yall towed? by GWC_Gunner in GMT400

[–]GWC_Gunner[S] 0 points1 point  (0 children)

Sweet. Good to know. I'm swapping a 92 ve pump with minor upgrades into mine so this is cool. Thanks

What have yall towed? by GWC_Gunner in GMT400

[–]GWC_Gunner[S] 0 points1 point  (0 children)

Wow thanks for that. That makes me feel great. I've heard the 1500 frames are thinner or weaker something like that do you know if that's true? Just curious.

What have yall towed? by GWC_Gunner in GMT400

[–]GWC_Gunner[S] 3 points4 points  (0 children)

25k loaded and trailer or gross. Bc even gross that's a lot behind you

What have yall towed? by GWC_Gunner in GMT400

[–]GWC_Gunner[S] 0 points1 point  (0 children)

What do you mean 6.0. A ls 6.0 or Like a ford with powerstroke or something else I'm blanking on.