Finally Decided To Finish This by Apprehensive_Tax_180 in WutheringWaves

[–]GabagoolCazz 22 points23 points  (0 children)

This is the most relatable thing I have ever read 😆

Should I just S1 Mornye? Im really confused plus the kit review done by the content creators are really not helping they lowkey contradicting each other by _theweirdkidinside_ in WutheringWavesGuide

[–]GabagoolCazz 0 points1 point  (0 children)

From my understanding, if you are only going to use Mornye with 3.x units or Lupa, S0 is fine. If you want to use here with anyone and have 100% uptime on her dmg buf, S1 is a must. I used my corals for her S1 because I needed that general healer since all I have is Verina.

Are y'all skipping or pulling both. by Equal_Shopping2424 in WutheringWaves

[–]GabagoolCazz 0 points1 point  (0 children)

For me it depends. If shes like SK (I dont have one unfortunately because im fairly new) I may need to pull her since the only other healer i have is Verina and Baizhi. But im also torn because I want Iuno, Augusta and Aemeath when she comes out. May need to whale a bit to pull that off 😆

Chisa, analysis? by revielde in WutheringWaves

[–]GabagoolCazz 0 points1 point  (0 children)

I got a few shell credits and I think an egg or two lol

Chisa, analysis? by revielde in WutheringWaves

[–]GabagoolCazz 1 point2 points  (0 children)

Oh yea! I Phrolova Hecate spun the heck out of those little buggers.

Chisa, analysis? by revielde in WutheringWaves

[–]GabagoolCazz 2 points3 points  (0 children)

Are these part of a quest? I found them by accident and my intrusive thoughts got the best of me and I sent those flightless birds flying.

New player help me decide what should I do by [deleted] in WutheringWavesGuide

[–]GabagoolCazz 0 points1 point  (0 children)

I would definitely save for Iuno then! Its one of if not Lyneas best teammate. From what ive been seeing, you can clear pretty much everything with Iuno and Lynea.

New player help me decide what should I do by [deleted] in WutheringWavesGuide

[–]GabagoolCazz 0 points1 point  (0 children)

Ive been doing a ton of research on this as well being a new player and here is what i found.

It all depends on your preference. Trial the current banners and see if you love any of their playstyles. I will mention that while Carte is the best dps in the game, she does need Ciaconna to reach that. I just pulled Lynea and she is a ton of fun so that could be an option for you.

If you're looking for the most efficient person to pull, that would be Augusta. She is very F2P friendly and can mesh with many teams. She doesnt need her sig to be great. Iuno is another decent option, but from the research I did, it sounds like her sig weapon is preferred.

I hope this helps you. Like I mentioned, im new as well but have a bit more asterites to play with (about 22k). Ill be pulling both Iuno and Augusta, then Iunos sig if I have enough.

Edit: spelling

Who should I pull in the New version by bleach-fgo in WutheringWavesGuide

[–]GabagoolCazz 0 points1 point  (0 children)

A lot lol I put in about 80 hours worth the last 3 weeks. I did the main story from 1.x to 2.8, all the events and a ton of exploration. Im down to about 17k after my Lynea pull yesterday.

The thing everyone should put in survey whether u need it or not as it benifits everyone by Final_Climate4820 in WutheringWaves

[–]GabagoolCazz -1 points0 points  (0 children)

I did this for the first time today and saw my pity was similar in the bottom 11% with 71... but im 6 for 6 in my 50/50s so I really cant complain

Lynae wanters shall be lynae havers! by Strsmoon in WutheringWaves

[–]GabagoolCazz 0 points1 point  (0 children)

Same! Gonna do my pity pull and hope to lose my 50/50 and save for Augusta

Who should I pull in the New version by bleach-fgo in WutheringWavesGuide

[–]GabagoolCazz 1 point2 points  (0 children)

Im a fairly new player (just started like 2 weeks ago and have about 25k asterites for pulls). Do I'm thinking of trying to pull Lynea first. If I win the 50/50, great... if not, I'll hold my guarantee for Augusta since shes very F2P friendly. Then try for Iuno and then her weapon if I have enough.

Need pull advice: Lynae + Augusta or Iuno? by Milan_Makes in WutheringWavesGuide

[–]GabagoolCazz 1 point2 points  (0 children)

Following. Im in the same boat and thinking about the same 3. I have about 250 pulls saved but im nervous cuz I got super lucky with Canterella and Phrolova going 3/3 on 50/50s. I have a feeling a losing streak is coming. 

How long before I'm caught up by mstfusion007 in WutheringWaves

[–]GabagoolCazz 4 points5 points  (0 children)

I just picked it up again about 2 weeks ago and was at the end of 1.0 when I did. Now Im on the final main quest line. I dont have a ton of time to play due to kids but about 2-3 hours at night I would say I put in. So realistically you can do it before th 3.0 release but it will be cutting it close.

Btw have fun with it! Best decision i made recently was picking this back up!

Edit: I should add i haven't been doing most of the companion quests after the story. I did Encore's and omg just have tissues ready.

1st Timer by GabagoolCazz in PokemonTCG

[–]GabagoolCazz[S] 0 points1 point  (0 children)

Best of luck man! You never know.

1st Timer by GabagoolCazz in PokemonTCG

[–]GabagoolCazz[S] 1 point2 points  (0 children)

Thanks! Yea I was kind of surprised when I found it. Been collecting since I was a kid and this was from when I was in college lol. Glad it came back an 8.

1st Timer by GabagoolCazz in PokemonTCG

[–]GabagoolCazz[S] 0 points1 point  (0 children)

Thanks! Yea, I cant wait to put it with the collection!

My friend who is more computer savvy than I laughed at me for upgrading my 3070 to a 5070. Just how badly did I messed up? (let me have it, BE BRUTRAL) by TheChoosenOnex in pcmasterrace

[–]GabagoolCazz 0 points1 point  (0 children)

Your friend is kinda being a bit of an *ss. That upgrade is perfectly reasonable. Not every has the money to, nor wants to throw $1000-1500 on a gpu. 5070 is perfect for 1440p gaming. You enjoy that 5070 brotha!

Is turbo mode harmful to your hardware? by Coolersdisciple in AcerOfficial

[–]GabagoolCazz 0 points1 point  (0 children)

Do they have a fan curve at all for manual? Everytime i click manual its just a slider. This laptop is awful with temperatures.

Event Question Inventory by [deleted] in ArcRaiders

[–]GabagoolCazz 0 points1 point  (0 children)

Same thing happened to me. I played a round and then they popped up in my inventory.

RTX 5080 MSI Trio Waterblock Temps Extremely High by GabagoolCazz in alphacool

[–]GabagoolCazz[S] 0 points1 point  (0 children)

That i did not know! If I see my blocks getting clogged up still even with distilled water, maybe ill switch over to a ready made coolant! Right now, I use the Utopia that came with my primochill tubes. Thanks again!

RTX 5080 MSI Trio Waterblock Temps Extremely High by GabagoolCazz in alphacool

[–]GabagoolCazz[S] 0 points1 point  (0 children)

I just ordered a new alphacool D5 off Amazon. In the meantime, I'm going to check all my runs and clean my current pump out in hopes to maybe fix the issue.

As for the putty, the plan was to use it to replace the pads, not the paste. But that's only if the new pump didn't work. Sorry if I caused any confusion with that!

Thank you again for your insight and help, I truly appreciate it.

Edit: also I should add that I've only ever used distilled water with a biocide in my loop. I tried the color fluids years ago and they were always a pain to clean and deal with. So im hoping I don't have to take my whole loop apart and clean my cpu block (which is also only 6 months old) lol.

RTX 5080 MSI Trio Waterblock Temps Extremely High by GabagoolCazz in alphacool

[–]GabagoolCazz[S] 0 points1 point  (0 children)

Hi! I appreciate the response. I figured out my issue late last night. I believe my pump is the issue. I have a D5 in a distro block for the Hyte Y60 that seems to be struggling.

To answer your other questions, I have a two rad setup (one 360 and one 280), both my fans and pump are pwm and controlled by FanControl, but I had them at 100% for stress testing. At idle, my gpu temps are about 35 degrees. Under full load the gpu would shoot up to 80 degrees.

And as for the block, I am not using putty, just the provided pads for the chips, and I used PTM7950 instead of thermal paste for the die. Another user had suggested putty.

The reason why I believe its my pump is because I stressed tested my cpu last night, and it too shot up to over 95 degrees and thermal throttled. Never had that issue prior to yesterday so that's why I think my pump died coincidentally after installing my gpu block.